EC Buying DHT11 Temperature and Humidity Sensor Module User Manual

1. הקדמה

This manual provides comprehensive instructions for the EC Buying DHT11 Temperature and Humidity Sensor Module. This module is designed for integration into various electronic projects, particularly those involving the Internet of Things (IoT) and smart home applications. It utilizes an ESP8266 ESP-01/ESP-01S as the master control to collect and transmit environmental data.

2. פּראָדוקט איבערview

The EC Buying DHT11 module combines a DHT11 temperature and humidity sensor with a baseboard designed for an ESP8266 ESP-01 or ESP-01S Wi-Fi module. This combination allows for wireless data transmission, making it suitable for remote environmental monitoring.

פיגורע 2.1: שפּיץ view of the EC Buying DHT11 Sensor Module. This image shows the blue DHT11 sensor component, the yellow header for the ESP-01/ESP-01S module, and the power pins.

פיגור 2.2: ווינקלדיק view of the EC Buying DHT11 Sensor Module. This perspective highlights the compact design and the various components mounted on the circuit board.

3. ספּעסאַפאַקיישאַנז

4. סעטאַפּ אינסטרוקציעס

Follow these steps to set up your EC Buying DHT11 Sensor Module:

1. Prepare the ESP-01/ESP-01S Module: Ensure you have an ESP-01 or ESP-01S Wi-Fi module. This module is not included with the DHT11 sensor board and must be acquired separately.
2. Program the ESP-01/ESP-01S: Before inserting, download your desired program or firmware to the ESP-01/ESP-01S module. This typically involves using a separate USB-to-serial adapter or programmer.
3. Insert the ESP-01/ESP-01S: Carefully insert the programmed ESP-01/ESP-01S module into the 2x4 pin bus on the DHT11 sensor board. Ensure the module is oriented correctly, typically indicated by an arrow or pin labels on the board.

Figure 4.1: The DHT11 Sensor Module with an ESP-01S Wi-Fi module correctly inserted into its header. Note the orientation of the ESP-01S module.
4. פאַרבינדן מאַכט: Connect a DC power supply within the range of 3.7V to 12V to the VCC and GND pins (2.54mm row pin) on the DHT11 sensor board. A 3.7V lithium battery can also be used as a power source.


פיגורע 4.2: נאָענט-אַרויף view of the DHT11 Sensor Module, highlighting the VCC and GND pins for power connection. The reset button is also visible.

5. אַפּערייטינג ינסטרוקטיאָנס

Once properly set up and powered, the module operates as follows:

• The integrated DHT11 sensor will begin collecting temperature and humidity data from its environment.
• The ESP-01/ESP-01S module, running your pre-programmed firmware, will process this data.
• The ESP-01/ESP-01S will then upload the collected temperature and humidity information to a designated server via Wi-Fi, as configured in your program.
• This module functions as a data collection node, suitable for smart home automation, environmental monitoring, or other IoT applications requiring temperature and humidity sensing.

6. טראָובלעשאָאָטינג

• אומרעכטע טעמפּעראַטור מעסטונגען: The ESP-01/ESP-01S module generates heat during operation. Due to its close proximity to the DHT11 sensor on this board, the heat from the ESP-01/ESP-01S can influence the DHT11's temperature readings, potentially causing them to be slightly higher than the actual ambient temperature. Consider this factor when interpreting data or if precise temperature measurements are critical.
• מאָדולע ניט פּאַוערינג אויף:
  • Verify that the power supply is within the specified range of 3.7V-12V DC.
  • Check the polarity of the VCC and GND connections.
  • Ensure the ESP-01/ESP-01S module is correctly seated in its header.
• קיין דאַטן טראַנסמיסיע:
  • Confirm that the ESP-01/ESP-01S module has been successfully programmed with the correct Wi-Fi credentials and server details.
  • Check your Wi-Fi network connectivity.
  • Ensure the server or data endpoint is accessible and configured to receive data.

7. וישאַלט

The EC Buying DHT11 Sensor Module requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the module in a clean, dry environment, away from excessive dust, moisture, and corrosive substances.
• Avoid exposing the module to extreme temperatures outside its operating range (0℃ - 50℃).
• Handle the module with care to prevent physical damage to components or solder joints.

8. וואָראַנטי און שטיצן

For technical support, inquiries, or warranty information regarding your EC Buying DHT11 Sensor Module, please refer to the official EC Buying website or contact your retailer. Please have your product model (DHT11) and purchase details available when seeking support.

איר קענען באַזוכן די EC Buying Store on Amazon פֿאַר מער אינפֿאָרמאַציע און קאָנטאַקט אָפּציעס.