Atlanta Digital LED Alarm Clock 2604/0 User Manual

הקדמה

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

סעטאַפּ

1. מאַכט קאַנעקשאַן

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. באַטערי באַקקופּ

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

בילד: הינטערשטע view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

אַפּערייטינג ינסטראַקשאַנז

1. באַשטעטיקן די צייט

1. דריקן און האַלטן די צייט שטעלן button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. ניצן די 12/24HR button (left side of the back panel) to adjust the hours.
3. דרוק די צייט שטעלן button again to switch to minute adjustment. Use the 12/24HR קנעפּל צו סטרויערן די מינוט.
4. דרוק די צייט שטעלן קנעפּל נאך אמאל צו באשטעטיגן און ארויסגיין פון צייט איינשטעלונג מאָדע.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24HR button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. באַשטעטיקן די שרעק

The clock supports two separate alarms.

1. דריקן און האַלטן די אַלאַרם שטעלן button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. ניצן די 12/24HR button to adjust the alarm hours.
3. דרוק די אַלאַרם שטעלן button again to switch to minute adjustment. Use the 12/24HR קנעפּל צו סטרויערן די אַלאַרם מינוטן.
4. דרוק די אַלאַרם שטעלן button once more to confirm and exit alarm setting mode.
5. To activate or deactivate an alarm, briefly press the AL. ON/OFF button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

The alarm features a קרעססענדאָ function, meaning the alarm sound starts softly and gradually increases in intensity.

3. שלאָף פונקציע

ווען דער אַלאַרם קלינגט, דריק די גרויסע קנעפּל SNOOZE button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. ווייַז ברייטנאַס אַדזשאַסטמאַנט

אַדזשאַסטירן די ברייטקייט פון דער עקראַן מיטן נוצן די דיממער slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. אַלאַרם באַנד אַדזשאַסטמאַנט

Adjust the alarm sound volume using the באַנד slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. וסב טשאַרדזשינג פּאָרט

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

וישאַלט

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• האַלטן די מיטל אַוועק פון וואַסער און הויך הומידיטי.
• פֿאַרמײַדט אויסשטעלן דעם זייגער צו דירעקטער זון אָדער עקסטרעמע טעמפּעראַטורן.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

טראָובלעשאָאָטינג

דיספּליי איז צו העל אָדער צו טונקל:

סטרויערן די דיממער slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

דער אַלאַרם קלינגט נישט:

• Check if the alarm is activated using the AL. ON/OFF button. An indicator should be visible on the display.
• פאַרזיכערן די באַנד slider is not set to "LOW" or minimum.
• באַשטעטיקן אַז די אַלאַרם צייט איז ריכטיק געשטעלט.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.