AmScope M162C-2L-PB10-WM-SP14-50P100S

AmScope 40X-1000X Student Microscope Kit User Manual

Model: M162C-2L-PB10-WM-SP14-50P100S

הקדמה

This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of your AmScope 40X-1000X Student Microscope Kit. Please read this manual thoroughly before using the microscope to ensure optimal performance and longevity of the instrument.

AmScope 40X-1000X Student Microscope Kit

Image: The AmScope 40X-1000X Student Microscope Kit, showing its compact design and primary components.

פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען פאַראַן אין אייער פּעקל:

  • מיקראָסקאָפּ
  • ספר
  • סליידז
  • דעקן סליפּס
  • מכשירים

פּראָדוקט פֿעיִקייטן

The AmScope Student Microscope offers the following key features:

  • Optical Glass Monocular Compound Microscope with Top & Bottom LED Lights
  • 40X-1000X Five Wide Field Magnifications
  • Sturdy Metal Frame with Coaxial Coarse & Fine Focusing
  • Dual LED Light for Both Slides and Opaque Subjects

סעטאַפּ

  1. אויספּאַקן: נעמט פֿאָרזיכטיק אַרויס אַלע קאָמפּאָנענטן פֿון דער פּאַקאַדזשינג. האַלט די פּאַקאַדזשינג פֿאַר צוקונפֿטיקע סטאָרידזש אָדער טראַנספּאָרט.
  2. אָרט: Place the microscope on a stable, flat surface away from direct sunlight, high temperatures, dust, and vibrations.
  3. מאַכט קשר: This microscope is battery powered. Ensure fresh batteries are installed in the base compartment.
  4. אויגנשטיק אינסטאַלאַציע: Insert the eyepiece (WF10X) into the top tube of the microscope.
  5. אָביעקטיוו לענסעס: The microscope comes with pre-installed objective lenses (4X, 10X, 40X). Rotate the revolving nosepiece to ensure they are securely in place.
פראָנט view of the AmScope Student Microscope

בילד: פראָנט view of the AmScope Student Microscope, highlighting the eyepiece, objective lenses, and stage.

אַפּערייטינג ינסטראַקשאַנז

  1. מאַכט אויף: Locate the power switch, usually on the base, and turn on the illumination.
  2. Selecting Illumination:
    • For transparent specimens (slides), use the bottom LED light.
    • For opaque specimens (solid objects), use the top LED light.
    • Adjust the brightness using the dimmer control if available.
  3. Placing a Specimen:
    • Place a prepared slide or your own specimen on the stage.
    • Secure the slide with the stagE קליפּס.
    • Center the specimen over the opening in the stage.
  4. סעלעקטינג מאַגנאַפאַקיישאַן:
    • Begin with the lowest power objective lens (4X) by rotating the revolving nosepiece until it clicks into place.
    • Higher magnifications (10X, 40X) can be selected as needed. The total magnification is the eyepiece magnification (10X) multiplied by the objective lens magnification.
  5. פאָקוסינג:
    • While looking through the eyepiece, slowly turn the coarse focus knob to bring the specimen into approximate focus.
    • Once roughly focused, use the fine focus knob for sharp, detailed focusing.
    • Adjust the diaphragm (located under the stage) to control the amount of light reaching the specimen, enhancing contrast.
  6. Viewינג: Adjust your eye to the eyepiece. If you wear glasses, you may be able to view with them on, or remove them if more comfortable.
זייַט view of the AmScope Student Microscope showing focus knobs

בילד: זייט view of the AmScope Student Microscope, illustrating the coarse and fine focus knobs.

ינסטראַקשאַנאַל ווידעא

ווידעא: אן איבערview of the AmScope M162C-2L Student Microscope, demonstrating its features and basic operation. This video is provided by AmScope.

וישאַלט

  • רייניקונג לענסעס: Use only specialized lens cleaning paper and lens cleaning solution. Gently wipe the lens surfaces. Avoid touching lenses with fingers.
  • רייניקונג קערפער: ווישט דעם מיקראָסקאָפּ קערפּער מיט אַ ווייכן, טרוקענעם שטאָף.amp שטאָף. דו זאלסט נישט נוצן האַרב קעמיקאַלז אָדער אַברייסיוו קלינערז.
  • סטאָרידזש: When not in use, cover the microscope with a dust cover (not included) and store it in a dry, cool place. Ensure the lowest power objective lens is in position and the stage is lowered.
  • באַטערי פאַרבייַט: If the LED illumination dims or fails, replace the batteries in the base of the microscope. Use the recommended battery type.

טראָובלעשאָאָטינג

פּראָבלעם מעגלעך סיבה לייזונג
קיין ילומאַניישאַן Power switch off, dead batteries, loose connection. Turn on power switch. Replace batteries. Check battery compartment for secure connection.
בילד איז פארשוואומען אדער נישט אין פאָקוס Incorrect focus knob usage, objective lens not clicked into place, dirty lens. Use coarse and fine focus knobs correctly. Rotate nosepiece until objective clicks. Clean objective and eyepiece lenses.
Dark field of view Diaphragm closed, light intensity too low, wrong illumination selected. Adjust diaphragm opening. Increase light intensity. Ensure correct top/bottom light is active for specimen type.
Dust or spots visible in view Dust on eyepiece or objective lens. Clean eyepiece and objective lenses using proper cleaning methods.

ספּעסאַפאַקיישאַנז

מאָדעל נאָמען Amscope M162C-2L-PB10-WM-SP14-50P100S
סאָרט AmScope
מאַגניפיקאַטיאָן מאַקסימום 1000x
ליכט מקור טיפּ לעד (אויבן און אונטן)
אָביעקטיוו לינז באַשרייַבונג אַקראָמאַטיק
מאַכט מקור באַטאַרייע פּאַוערד
מאַטעריאַל מעטאַל
פּראָדוקט דימענשאַנז (L x W x H) 16"ל x 12"בר x 8"ה
פּונקט וואָג 4.2 פונט
קאָליר בלוי, רויט

וואָראַנטי און שטיצן

This AmScope microscope comes with a 5 יאָר מאַנופאַקטורער וואָראַנטי. For warranty claims, technical support, or any questions regarding your product, please contact AmScope customer service directly. Refer to the AmScope webוועבזייטל אדער אייער קויפן דאקומענטאציע פאר קאנטאקט אינפארמאציע.

© 2023 AmScope. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.