אַנדעריק RR3720 אוניווערסאַל פּראָיעקטאָר ווייַט קאָנטראָל ינסטרוקציע מאַנואַל

הקדמה

The Anderic RR3720 is a universal remote control designed specifically for projectors. It is compatible with a wide range of projector brands and models, offering a convenient replacement or secondary remote. This manual provides comprehensive instructions for setting up, operating, and maintaining your RR3720 remote control.

סעטאַפּ

1. באַטאַרייע ייַנמאָנטירונג

The Anderic RR3720 remote requires two (2) AAA batteries for operation. Ensure correct polarity when inserting the batteries.

1. געפֿינען די באַטאַרייע אָפּטייל אויף די צוריק פון די ווייַט קאָנטראָל.
2. רוקט דעם באַטעריע דעקל אַראָפּ צו עפֿענען.
3. Insert two AAA batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
4. Replace the battery cover by sliding it upwards until it clicks into place.

פיגורע 1: דערציען view of the RR3720 remote, illustrating the battery compartment.

2. פּראָגראַמירן די ווײַטקאָנטראָל

The RR3720 can be programmed to control most projector brands. It supports both direct code entry and an automatic search function.

Automatic Code Search (Recommended)

This method is generally the easiest and most effective for finding the correct code for your projector.

1. Ensure your projector is turned on.
2. Point the RR3720 remote towards your projector.
3. דריקן און האַלטן די "Auto" button on the remote until the indicator light (usually the Power LED) begins to flash. This indicates the remote is in search mode.
4. מעלדונג די "Auto" button. The remote will now cycle through codes.
5. As soon as your projector turns off or responds (e.g., displays a menu), immediately press any button (e.g., "Power" or "Input") to lock in the code. If you wait too long, the remote may pass the correct code.
6. Test all functions of the remote to ensure proper operation. If some functions do not work, repeat the automatic search process.

Direct Code Entry (Refer to included code list)

If you have a specific code for your projector brand, you can enter it directly.

1. Locate the code list provided with your RR3720 remote. Find the codes for your projector brand.
2. דריקן און האַלטן די "Power" קנעפּל און די "Input" button simultaneously until the indicator light stays lit.
3. Enter the 3-digit code for your projector brand using the number buttons (1-4, or other buttons if they have secondary number functions).
4. If the code is accepted, the indicator light will turn off. If it flashes rapidly, the code was incorrect or not recognized.
5. Test the remote's functions. If it does not work, try another code from the list for your brand or use the automatic search method.

אַפּערייטינג ינסטראַקשאַנז

אונטן איז אַן איבערview of the buttons on your Anderic RR3720 remote and their primary functions.

פיגורע 2: פראָנט view of the RR3720 remote with button layout.

וישאַלט

באַטערי פאַרבייַט

Replace batteries when the remote's indicator light does not illuminate or flashes weakly, or when the remote becomes unresponsive. Always replace both batteries at the same time with new AAA alkaline batteries.

רייניקונג

To clean the remote, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

סטאָרידזש

Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period (e.g., more than one month), remove the batteries to prevent leakage and potential damage to the remote.

טראָובלעשאָאָטינג

• די ווײַט־ראַם רעאַגירט נישט:
  • קאָנטראָלירט צי די באַטעריעס זענען ריכטיק אַרײַנגעשטעלט מיט דער ריכטיקער פּאָלאַריטעט.
  • פאַרבייַטן אַלטע באַטעריעס מיט נייַע AAA באַטעריעס.
  • זיכער מאַכן אַז עס זענען נישטאָ קיין שטערונגען צווישן דעם ווײַטקאָנטראָל און דעם פּראָיעקטאָר'ס IR ופנעמער.
  • Verify that the remote is programmed correctly for your projector model. Re-attempt the automatic code search.
• עטלעכע פונקציעס אַרבעטן נישט:
  • The current code may not fully support all functions of your specific projector model. Try repeating the automatic code search to find a more compatible code.
  • Some projectors may not have certain functions (e.g., volume control if no internal speakers).
• Projector does not turn off during auto search:
  • Ensure the remote is pointed directly at the projector's IR receiver.
  • Make sure the projector is powered on before starting the auto search.
  • If the projector does not respond after several cycles, it might not be compatible with the remote's pre-programmed codes.

ספּעסאַפאַקיישאַנז

שטיצן

For further assistance, troubleshooting, or inquiries regarding your Anderic RR3720 Universal Projector Remote, please contact Anderic customer support. Refer to the contact information provided with your product packaging or visit the official Anderic webפּלאַץ.

Anderic is a US-based company committed to providing high-quality replacement remote controls and accessories.