RAYSON TD-130 34 Hole Wire Binding Machine User Manual

1. הקדמה

The RAYSON TD-130 is a manual 34-hole wire binding machine designed for efficient document organization. It features a 3:1 pitch, allowing for precise punching and binding of various document sizes. This machine is ideal for small offices, classrooms, or home use, providing a professional finish to reports, presentations, and other documents.

Key features include a punching capacity of up to 15 sheets (80gsm A4 paper) and a binding capacity of up to 120 sheets (13mm wire ring). The adjustable margin depth ensures optimal binding for different document thicknesses, and the integrated waste collection tray simplifies cleanup.

2. פּראָדוקט איבערview און קאַמפּאָונאַנץ

Familiarize yourself with the main components of your RAYSON TD-130 binding machine for proper operation.

Figure 2.1: Main components of the TD-130 binding machine.

1. Paper Stopper: Guides paper for consistent punching.
2. Punch & Wire Size Selector: Adjusts settings for punching and wire binding.
3. ביינדינג פּלאַטע: Holds the wire spine during the binding process.
4. אפערירן הענטל: Used for punching holes in paper.
5. Paper Feed Slot: Where paper is inserted for punching.
6. Wire Slot System: Area for placing and closing wire spines.
7. Paper Margin Adjustment: Controls the depth of the punched holes from the paper edge (2.5mm, 3.5mm, 4.5mm).
8. Waste Collection Tray: Collects paper scraps from punching.
9. Spine Size Selector: Indicates the appropriate wire spine size.

3. סעטאַפּ

3.1 ונבאָקסינג און אַסעמבלי

Upon unboxing, locate the operate handle, which is typically stored on the bottom of the machine. Insert the handle into the designated slot and secure it.

Figure 3.1: Handle stored on the bottom of the machine.

3.2 Initial Cleaning (Removing Anti-Rust Oil)

Before first use, it is crucial to clean any anti-rust oil from the punching blades. Use a few sheets of scrap paper (at least 6 times) to punch through the machine until no oil stains are visible on the punched paper. This ensures clean and precise punching for your documents.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1 Punching Documents

1. אַדזשאַסטירן מאַרדזשין טיפקייַט: Locate the paper margin adjustment knob on the side of the machine. Rotate it to select the desired margin depth (2.5mm, 3.5mm, or 4.5mm) based on your document's thickness. Thicker documents generally require a larger margin depth.


Figure 4.1: Margin depth adjustment settings.

2. Set Side Stopper: Adjust the side stopper to align your paper size (e.g., A4, B5, Letter Size, Junior Legal) for consistent punching.


Figure 4.2: Paper size guide and side stopper.

3. אַרײַנשטעלן פּאַפּיר: Insert up to 15 sheets of 80gsm A4 paper into the paper feed slot, ensuring it is flush against the side stopper and margin guide.
4. לאָך לעכער: Firmly pull down the operate handle to punch the holes. Release the handle and remove the punched paper. Repeat for all pages.

4.2 Wire Binding (3:1 Pitch)

The TD-130 is designed for 3:1 pitch double wire binding, suitable for up to 120 sheets.

1. Prepare Wire Spine: Select a wire spine appropriate for your document thickness (up to 13mm for 120 sheets). Place the wire spine onto the binding plate's metal hooks, ensuring the open side faces upwards.
2. Load Punched Pages: Carefully thread the punched pages onto the open wire spine. Ensure all pages are correctly aligned.
3. Close Wire Spine: Once all pages are loaded, pull the operate handle downwards to close the wire spine. The machine will compress the wire, securing your document.
4. Remove Document: Release the handle and remove your professionally bound document.

4.3 Spiral Binding (3:1 Pitch)

The TD-130 can also be used for spiral binding with 3:1 pitch coils.

1. לאָך לעכער: Follow the punching instructions in Section 4.1 to punch holes in your document.
2. Insert Spiral Coil: Manually thread the spiral coil through the punched holes. Ensure the coil is inserted smoothly.
3. זיכערע שפּול: Once the coil is fully inserted, use a pair of pliers to cut off any excess coil and crimp the ends to prevent unraveling.

Figure 4.3: Spiral binding a document.

4.4 Manual Book Ring Binding

For documents requiring flexible binding, book rings can be used.

1. לאָך לעכער: Follow the punching instructions in Section 4.1 to punch holes in your document.
2. Insert Book Rings: Manually insert the desired number of book rings through the punched holes.
3. Close Rings: Close the book rings to secure the document.

5. וישאַלט

Regular maintenance ensures the longevity and optimal performance of your TD-130 binding machine.

• ליידיקן אָפּפאַל טאַץ: Regularly check and empty the waste collection tray located at the bottom of the machine. This prevents paper scraps from accumulating and potentially jamming the punching mechanism.
• ריין בליידס: Periodically punch through a few sheets of scrap paper to help clean any residue from the punching blades.
• שמירן: If the punching action becomes stiff, apply a small amount of machine oil to the moving parts of the punching mechanism.
• סטאָרידזש: האַלט די מאַשין אין אַ ריינער, טרוקענער סביבה ווען זי איז נישט אין באַנוץ.

6. טראָובלעשאָאָטינג

If you encounter issues with your TD-130 binding machine, refer to the following common problems and solutions:

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries regarding your RAYSON TD-130 binding machine, please refer to the documentation included with your purchase or contact RAYSON customer service directly. Keep your purchase receipt as proof of purchase.

You can also visit the official RAYSON store on Amazon for additional product information and support: RAYSON Store