SUPERNIGHT 131.2FT LED Light Strips Instruction Manual

הקדמה

Thank you for choosing SUPERNIGHT 131.2FT LED Light Strips. This product features 4 rolls of 32.8FT (total 1200 LEDs) 5050 RGB LED strips, designed to provide vibrant, color-changing illumination for various indoor and outdoor applications. With easy installation, smart music sync, and a durable, waterproof design, these lights are perfect for enhancing your bedroom, living room, kitchen, or for holiday decorations.

זיכערקייַט אינפֿאָרמאַציע

• פאַרזיכערן די מאַכט צושטעלן איז דיסקאַנעקטיד איידער ינסטאַלירונג אָדער וישאַלט.
• Do not expose the power adapter or controller to water or moisture. Only the LED strips are rated IP65 waterproof.
• Avoid bending the LED strips sharply, as this may damage the circuit.
• האַלטן אויס פון דערגרייכן פון קינדער.
• ניצט נאָר דעם צוגעשטעלטן מאַכט אַדאַפּטער און קאָמפּאָנענטן.
• Do not cover the LED strips with flammable materials when in use.

וואָס איז אין די קעסטל

• 4 × 32.8FT LED Strip Lights
• 1 × באַניצער מאַנואַל
• (Note: Power adapter and controller are typically included as part of the standard kit, though not explicitly listed in the 'What's in the Box' section.)

סעטאַפּ און ינסטאַלירונג

1. צוגרייטונג

Before installation, ensure the surface is clean, dry, and flat for optimal adhesion. Plan your desired layout for the LED strips.

2. Connecting the Strips

Connect the LED strips to the controller and power adapter. Ensure all connections are secure. For multiple rolls, you can connect them in parallel or series depending on your setup and desired brightness distribution. Always align the arrows on the connectors to ensure correct polarity.

Figure 1: Connection Methods and Connector Alignment. The image illustrates how to connect multiple LED strips in parallel or series, and emphasizes aligning the arrows on the 4-pin connectors for proper functionality. It also shows the importance of unfolding the entire strip when in use to prevent overheating.

3. Adhering the Strips

Peel off the protective backing from the adhesive tape on the back of the LED strip. Firmly press the strip onto the prepared surface. The strong self-adhesive is suitable for clean, dry, and flat surfaces.

Figure 2: Waterproof Design and Self-Adhesive. This image highlights the IP65 waterproof rating of the LED strip and demonstrates the strong self-adhesive backing, which should be peeled off before application to a clean, dry, and flat surface.

4. Cutting the Strips (Optional)

If you need to shorten the LED strips, locate the scissor marks along the strip. These marks indicate safe cutting points, typically every 5 LEDs. Cut only at these designated points to avoid damaging the circuit. You can use 4-pin 8mm light strip connectors (not included) to reconnect cut sections or extend the setup.

Figure 3: Cutting the LED Strip. This diagram clearly shows the designated cutting points on the LED strip, marked with a scissor icon, allowing for customization of length.

5. פּאַוערינג אויף

Once installed, connect the power adapter to a suitable electrical outlet. The lights are ready for operation.

אַפּערייטינג ינסטראַקשאַנז

1. רימאָוט קאָנטראָל אָפּעראַציע

Use the included remote control to manage the LED strip lights. The remote allows you to:

• צינדט אָן/אויס די ליכטער.
• סטרויערן ברייטנאַס לעוועלס.
• Select from a wide range of static colors (red, green, blue, white, purple, yellow, pink, orange, and more).
• Choose various dynamic modes (e.g., flash, fade, jump).

Figure 4: Easy Control with Remote. This image shows the remote control used to operate the LED lights, highlighting features like brightness adjustment, multiple mode options, long lifespan (50,000+ hours), and ease of installation.

2. Smart Music Sync Mode

The LED strip lights feature an intelligent music mode with a built-in high-sensitivity microphone. When activated, the lights will change colors and patterns in sync with the rhythm of ambient music or sounds, creating an immersive atmosphere for parties or gaming.

Figure 5: Music Sync Feature. This image demonstrates the music sync capability of the LED lights, showing them changing colors in response to sound, enhancing the ambiance of a room.

3. בלועטאָאָטה קאַנעקטיוויטי

The lights support Bluetooth connectivity, allowing for control via a compatible smartphone application. Refer to the app's instructions for detailed features and setup.

וישאַלט

• רייניקונג: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• וואַסער קעגנשטעל: The LED strips are IP65 waterproof, meaning they are protected against multi-directional, low-pressure water jets. This makes them suitable for both indoor and outdoor use. However, the power adapter and controller are not waterproof and must be protected from moisture.
• סטאָרידזש: When not in use for extended periods, store the LED strips in a cool, dry place, away from direct sunlight and extreme temperatures.

טראָובלעשאָאָטינג

פּראָדוקט ספּעסאַפאַקיישאַנז

פּראָדוקט ווידעא

וואָראַנטי און שטיצן

For warranty information, technical support, or any inquiries regarding your SUPERNIGHT LED Light Strips, please refer to the contact information provided on the product packaging or visit the official SUPERNIGHT webפּלאַץ. האַלטן דיין קויפן קאַבאָלע פֿאַר וואָראַנטי קליימז.