DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad User Manual

הקדמה

This manual provides essential information for the installation, operation, and maintenance of the DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad. This keypad is designed to work seamlessly with DSC PowerSeries NEO control panels, including models HS2016, HS2032, HS2064, and HS2128.

The image displays the DSC HS2LCD N keypad, a white, rectangular device with a prominent blue LCD screen. The screen shows the text 'System is Ready to Arm'. The DSC logo is visible on the lower left of the keypad.

ייַנמאָנטירונג און סעטאַפּ

The DSC HS2LCD N keypad is a hardwired device requiring professional installation.

פאַר-ינסטאַלירונג טשעקליסט

• Ensure the control panel is powered off before connecting the keypad.
• Verify compatibility with your PowerSeries NEO control panel (HS2016, HS2032, HS2064, HS2128).
• Have necessary tools: screwdriver, wire strippers, mounting hardware.

וויירינג אינסטרוקציעס

Connect the keypad to the control panel's Keybus terminals (Red, Black, Yellow, Green) following the wiring diagram provided with your control panel. Ensure correct polarity.

מאַונטינג

Mount the keypad securely on a flat surface using the provided mounting screws. Ensure it is placed in a location easily accessible for daily use.

אַפּערייטינג ינסטראַקשאַנז

The HS2LCD N keypad provides a full message LCD display for clear system status and intuitive operation.

אַרמינג די סיסטעם

• בלייַבן אַרמינג: דריקן און האַלטן די בלייַבן button or enter your user code followed by *9.
• אוועק אַרמינג: Enter your user code. The system will arm after the exit delay.
• ניט-ענטרי אַרמינג: דריקן און האַלטן די No-Entry button or enter your user code followed by *1.

דיסאַרמינג די סיסטעם

Enter your user code when the system is armed or in alarm.

Viewסיסטעם סטאַטוס

The LCD will display messages such as "System is Ready to Arm", "System Armed", or "Alarm". Use the arrow keys (< >) to scroll through event buffers or system messages.

אַקסעס פאַנגקשאַנז

Refer to your main control panel manual for specific function codes and programming options accessible via the keypad. Common functions include:

• Bypass Zones: *1 followed by zone number(s).
• טראָובלע ווייַז: *2.
• Memory of Alarms: *3.
• צייט און דאַטע באַשטעטיקן: *6 followed by master code.

וישאַלט און זאָרג

• רייניקונג: Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• רעגולער טעסטינג: Periodically test your alarm system, including the keypad, in conjunction with your alarm monitoring company.
• מאַכט צושטעלן: Ensure a stable power supply to the control panel to prevent keypad malfunctions.

טראָובלעשאָאָטינג

This section addresses common issues you might encounter with your DSC HS2LCD N keypad.

קיפּאַד ניט ריספּאַנדינג

• קוק די מאַכט: Ensure the control panel has power.
• וויירינג: Verify all Keybus connections are secure and correctly wired (Red, Black, Yellow, Green).
• Control Panel Status: Check the main control panel for error indicators.

"Trouble" Light On

• דרוק *2 on the keypad to view the specific trouble condition (e.g., AC failure, battery trouble, zone fault).
• Consult your control panel manual for detailed explanations of trouble codes.

Incorrect Time/Date Display

• ניצן די *6 master code command to set the correct time and date.

Keypad Beeping

• A continuous beep usually indicates a trouble condition. Press *2 to identify the issue.
• A short beep confirms key presses.

טעכניש ספּעסאַפאַקיישאַנז

וואָראַנטי און קונה שטיצן

דער פּראָדוקט קומט מיט אַ 12-חודש וואָראַנטי פֿון די קויפן טאָג.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized DSC dealer or the product manufacturer.

For more information, visit the official DSC website or consult your installer.