Antec NX700 Mid-Tower ATX Gaming Case User Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.

Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.

שליסל פֿעיִקייטן

• 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
• Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
• טעמפּערד גלאז זייט פּאַנעל: A 4mm thick tempered glass side panel provides a clear view פון אייערע אינערלעכע קאמפאנענטן.
• Extensive Radiator Support: Supports up to a 360mm radiator for advanced liquid cooling solutions.
• Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
• מאָטהערבאָאַרד קאַמפּאַטאַבילאַטי: Supports ATX, Micro-ATX, and Mini-ITX motherboards.

Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.

2. סעטאַפּ און ייַנמאָנטירונג

Follow these steps to install your components into the Antec NX700 case.

2.1 Included Fans Installation

The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.

Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.

2.2 Cooling System Configuration

The NX700 supports various fan and radiator configurations to optimize cooling performance.

• פראָנט: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
• אויבן: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
• הינטן: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
• מאַכט צושטעלן שראָוד: Supports 2 x 120mm fans.

Figure 4: Diagram illustrating fan and radiator mounting options within the case.

Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.

2.3 קאָמפּאָנענט אינסטאַלאַציע

The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.

• מאָטהערבאָאַרד: Supports ATX motherboards (up to 305mm x 275mm).
• CPU Cooler: Maximum height of 170mm.
• גראַפיקס קאַרטל (GPU): Maximum length of 340mm.
• מאַכט צושטעלן (פּסו): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
• סטאָרידזש: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.

Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.

פיגור 7: אן אינערליכע view of the NX700 case with various components installed, demonstrating space and layout.

2.4 Video Guide for Assembly

Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.

3. אַפּערייטינג ינסטרוקטיאָנס

3.1 I/O Panel Functions

The top I/O panel provides convenient access to essential controls and ports.

• מאַכט קנעפּל: טורנס די סיסטעם אויף אָדער אַוועק.
• LED קאָנטראָל קנעפּל: Cycles through various ARGB lighting modes for the included fans.
• באַשטעטיק קנעפּל: ריסטאַרט די סיסטעם.
• וסב 3.0 פּאָרץ (x2): פֿאַר הויך-גיכקייט דאַטן אַריבערפירן.
• MIC/HD-AUDIO Jacks: פֿאַר פֿאַרבינדן כעדפאָונז און מיקראָפֿאָנען.

פיגורע 8: דעטאַילעד view of the top I/O panel with power, LED control, USB 3.0, and audio ports.

3.2 ARGB פען קאָנטראָל

The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.

1. Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
2. מוטערבאָרד סינקראָניזאַציע: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.

Figure 9: The Antec NX700 case showcasing its vibrant ARGB lighting capabilities.

4. וישאַלט

Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.

• שטויב פילטערס: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
• Case Exterior: ווישן די יקסטיריער סערפאַסיז מיט אַ ווייך, דamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער אָדער סאָלווענטן.
• טעמפּערד גלאז פּאַנעל: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
• אינערלעכער רייניקונג: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

5. טראָובלעשאָאָטינג

This section addresses common issues you might encounter with your Antec NX700 case.

5.1 Fans Not Spinning or Lighting Up

• מאַכט קשר: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
• ARGB Connection: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
• LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
• מוטערבאָרד ווייכווארג: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
• Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.

5.2 קיין מאַכט צו סיסטעם

• PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
• פראָנט פּאַנעל קאַנעקטערז: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.

5.3 Missing Motherboard Mounting Stand-offs

While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.

6. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.

Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.

פיגורע 11: דערציען view of the Antec NX700, showing expansion slots and fan mount.

7. וואָראַנטי און שטיצן

For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.

Antec Official Webפּלאַץ: www.antec.com