LEDONE ווײַטקאָנטראָל באַניצער מאַנואַל

1. הקדמה

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. פּראָדוקט פֿעיִקייטן

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. סעטאַפּ

3.1 באַטאַרייע ייַנמאָנטירונג

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. געפֿינען די דעקן פון די באַטאַרייע אָפּטייל אויף די צוריק פון די ווייַט קאָנטראָל.
2. רוק דעם דעקן אין די ריכטונג אנגעוויזן דורך די פייַל.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. לייג צוריק דעם דעקל פונעם באַטעריע־אָפּטייל ביז עס קליקט זיכער אַרײַן אין פּלאַץ.

3.2 ערשט קאַנעקשאַן

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. אַפּערייטינג ינסטרוקטיאָנס

מאַכט זיך באַקאַנט מיטן אויסלייג פֿון דער ווײַטקאָנטראָל:

Figure 1: LEDONE Remote Control Layout

4.1 יקערדיק פאַנגקשאַנז

• ON/OFF: Press to toggle the connected light fixture on or off.
• אַוטאָ מאָדע: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• באַשטעטיק: Resets all settings on the connected light fixture to their factory default values.
• ליכטיקייט (+/-): Adjusts the light output intensity.

4.2 אַוואַנסירטע סעטטינגס

The remote allows for precise customization of sensor and lighting parameters:

• אָנהייב: Initiates the application of selected settings.
• זכּרון: Saves the current custom settings for quick recall.
• צולייגן: Applies the settings stored in memory or the currently selected custom settings.

דעטעקשאַן ראַנגע

Select the desired motion detection sensitivity:

• 25%, 50%, 75%, 100%: Choose the percentage of the sensor's maximum detection range.

האַלטן צייט

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

סטאַנדביי דימינג מדרגה

Determines the light output level during the stand-by period (after hold time and before turning off):

• 10%, 20%, 30%, 50%: Set the dimming percentage.

סטאַנדביי פּעריאָד

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

טאָגליכט סענסאָר

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• דיסייבאַל: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

טעסט (2 ס)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. וישאַלט

To ensure optimal performance and longevity of your LEDONE Remote Control:

• רייניקונג: ווישט אָפּ דעם ווײַטקאָנטראָל מיט אַ ווייכן, טרוקענעם שטאָף. ניצט נישט קיין שרײַבנדיקע רייניגער אָדער סאָלווענטן.
• באַטערי פאַרבייַט: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• סטאָרידזש: האַלט די ווײַטקאָנטראָלירטע אַפּאַראַטור אין אַ קיל, טרוקן אָרט, ווײַט פֿון דירעקטער זון און עקסטרעמע טעמפּעראַטורן.
• ויסמיידן נעץ: Do not expose the remote to water or high humidity.

6. טראָובלעשאָאָטינג

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• ווייַט ניט ריספּאַנדינג:
  • קאָנטראָלירן די ייַנמאָנטירונג פון די באַטאַרייע און פאַרבייַטן די באַטעריז אויב נייטיק.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• סעטינגס נישט גילטיק:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• לימיטירטע קייט:
  • פאַרבייַטן באַטעריז מיט פריש אָנעס.
  • Ensure no strong interference sources (e.g., other wireless devices) are nearby.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.