Herdio 6.5-Inch Bluetooth Ceiling Speakers with In-Wall Ampליפער

הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• 1x Wall Mount Bluetooth Ampליפער
• קסנומקסקס אַק אַדאַפּטער
• 2x סקרוז
• 2x 6.5-inch In-Ceiling Speakers
• 2x Speaker Wires
• 2x User Manuals (one for amplifier, one for speakers)

סעטאַפּ

This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.

1. Ampהעכער ינסטאַלירונג

די אין-וואַנט amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.

1. צוגרייטן די וואנט: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampליפער.
2. פאַרבינדן מאַכט קאַבלע: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampהעכער מאָדולע.
3. פאַרבינדן אַודיאָ קאַבל: Connect the audio cable to the three-pin connector on the back of the ampהעכער מאָדולע.
4. זיכער Ampלייבער: אַרייַנלייגן די amplifier module into the wall opening and secure it using the provided screws.
5. צוטשעפּען פּנים־פּלאַטע: Place the decorative faceplate over the installed ampליפטער און באַוואָרענען עס.

2. רעדנער ינסטאַלירונג

The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.

1. מארק אויסשניט: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
2. קאַט עפן: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
3. אַראָפּנעמען גרילל: Gently remove the magnetic grille from the front of each speaker.
4. פאַרבינדן רעדנער ווירעס: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
5. אַרײַנשטעלן רעדנער: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
6. פאַרשטייַפן קלamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
7. Replace Grille: Reattach the magnetic grille to the speaker.

3. וויירינג דיאַגראַמע

Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).

4. מאַכט קאַנעקשאַן

Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the ampלײַפייער וועט זיך באַלויכטן.

אַפּערייטינג ינסטראַקשאַנז

Learn how to use your Herdio ceiling speaker system.

1. מאַכט אויף/אויס און באַנד קאָנטראָל

Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.

2. בלועטאָאָטה פּערינג

After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.

3. ינפּוט סעלעקציע

Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.

4. יו-עס-בי פונקציאָנאַליטעט

The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).

5. מיקראָפאָן אַרייַנשרייַב

Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.

וישאַלט

To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampליפיער, פאָלגט די וישאַלט גיידליינז:

• רייניקונג: ניצן אַ ווייך, טרוקן שטאָף צו ריין די amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
• באַזייַטיקונג פון שטויב: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
• ינווייראַנמענאַל טנאָים: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
• וויירינג דורכקוק: קאָנטראָלירט פּעריִאָדיש אַלע וויירינג פֿאַרבינדונגען צו זיכער מאַכן אַז זיי זענען זיכער און פֿרײַ פֿון קעראָוזשאַן אָדער שעדיקן.

טראָובלעשאָאָטינג

If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:

• קיין מאַכט:
  • Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
  • Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
  • באַשטעטיקן אַז די עלעקטרישע אַוטלעט אַרבעט דורך אַרײַנשטעקן אַן אַנדער דעוויס.
• קיין קלאַנג פֿון רעדנערס:
  • Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
  • Ensure the volume knob on the ampליפיער איז אויסגעדרייט אַרויף.
  • Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
  • If using Bluetooth, ensure your device is paired and playing audio.
  • If using AUX or MIC, ensure the external device is connected and functioning correctly.
• בלועטאָאָטה קאַנעקשאַן ישוז:
  • פאַרזיכערן די amplifier is in Bluetooth pairing mode (blue light flashing).
  • Make sure your Bluetooth device is within the 30+ feet wireless range.
  • Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
  • ריסטאַרט ביידע די ampליפיער און אייער בלוטוט דעווייס.
• פאַרקרימט סאָונד:
  • רעדוצירן דעם קול אויף ביידע ampליפיער און אייער אַודיאָ מקור מיטל.
  • קאָנטראָלירט די רעדנער דראָט קאַנעקשאַנז פֿאַר קיין פרייַ פֿעדעם אָדער קורץ קרייזן.
  • Ensure the audio source is not overdriven or producing distorted signals.

ספּעסאַפאַקיישאַנז

וואָראַנטי אינפֿאָרמאַציע

The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Ampליפיער קומט מיט א לימיטעד וואָראַנטי. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.

שטיצן

For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webפּלאַץ.