LEDONE Full Cut Off 60W LED Wall Pack Light

1. הקדמה

This manual provides essential information for the safe installation, operation, and maintenance of your LEDONE Full Cut Off 60W LED Wall Pack Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed for outdoor use in commercial and industrial settings, featuring a full cut-off design to minimize light pollution and a built-in photocell for dusk-to-dawn operation.

בילד 1.1: פראָנט-זייט view of the LEDONE 60W Full Cut Off LED Wall Pack Light. This image displays the fixture's dark bronze housing and the array of LED lights behind a clear, tempered glass lens.

2. זיכערקייַט אינפֿאָרמאַציע

• ווארענונג: ריזיקע פון ​​עלעקטרישן קלאַפּ. אָפּשטעקן די מאַכט ביים פיוז אָדער קרייַז ברעאַקער איידער ינסטאַלירונג אָדער סערוויסינג.
• Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• ענשור די צושטעלן וואָלtage is compatible with the fixture (120-277V AC).
• נישט האַנדלען מיט לעבעדיקע דראָטן.
• טראָגט זיכערהייט ברילן און הענטשקעס בעת די אינסטאַלאַציע.
• זיכער מאַכן אַז די פֿיקסטשור איז זיכער אינסטאַלירט צו פאַרמייַדן פֿאַלן.
• Do not attempt to modify the fixture. Any modifications will void the warranty.

3. פּעקל אינהאַלט

Verify that all components are present and undamaged before installation.

• 1 x LEDONE Full Cut Off 60W LED Wall Pack Light Fixture
• מאָנטירונג האַרדווער (שרויף, אַנקערס, גאַסקאַץ)
• ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)

4. ספּעסאַפאַקיישאַנז

Image 4.1: Dimensional drawing of the LEDONE 60W Wall Pack Light, showing measurements of 11.5 inches (293mm) in length, 10.8 inches (275mm) in width, and 3.9 inches (100mm) in height.

5. אויפשטעלן און אינסטאַלירן

איידער איר אָנהייבן:

• קער אַוועק מאַכט אין די קרייַז צוימען אָדער קאָריק קעסטל.
• זיכער מאַכן אַז די מאָנטירונג ייבערפלאַך איז סטרוקטורעל געזונט און קען שטיצן די וואָג פון די פיקסטשער.
• Have necessary tools ready: screwdriver, wire strippers, drill, sealant (if required for weatherproofing).

מאַונטינג אינסטרוקציעס:

1. Carefully remove the fixture from its packaging.
2. Detach the mounting plate from the back of the fixture.
3. Position the mounting plate on the desired wall location. Mark the drilling points for the mounting screws.
4. באָרט פּילאָט לעכער און אַרײַנשטעלן פּאַסיק אַנקערס אויב נייטיק.
5. Secure the mounting plate to the wall using the provided screws. Ensure it is level and tight.

בילד 5.1: צוריק view of the LEDONE 60W Wall Pack Light, illustrating the integrated mounting bracket and conduit entry point for electrical wiring.

וויירינג אינסטרוקציעס:

6. Feed the electrical supply wires through the conduit entry point on the mounting plate.
7. Connect the fixture's wires to the supply wires using appropriate wire connectors:
   • Black wire (Fixture) to Live/Hot wire (Supply)
   • White wire (Fixture) to Neutral wire (Supply)
   • Green/Ground wire (Fixture) to Ground wire (Supply)
8. ענשור אַז אַלע קאַנעקשאַנז זענען זיכער און רעכט ינסאַלייטיד.
9. Carefully tuck all wires into the junction box or mounting plate cavity.
10. Attach the fixture body to the mounting plate, ensuring a tight seal to maintain IP65 rating. Secure with screws.
11. Apply silicone sealant around the edges of the fixture and conduit entry points if necessary to prevent water ingress.
12. ומקערן מאַכט אין די קרייַז צוימען.

6. אַפּערייטינג ינסטרוקטיאָנס

This LED wall pack light is equipped with a built-in photocell for automatic dusk-to-dawn operation. No manual intervention is required after installation.

• זונ-ביז-טאג פונקציע: The integrated photocell sensor detects ambient light levels. The fixture will automatically turn ON when natural light falls below a certain threshold (dusk) and turn OFF when sufficient natural light is detected (dawn).
• Rotatable Fixture: The fixture can be rotated by 15 degrees to adjust the light direction. This adjustment should be made during installation or maintenance when power is OFF. Loosen the appropriate screws, adjust the angle, and re-tighten securely.

Image 6.1: LEDONE 60W Wall Pack Lights installed on the exterior of a commercial building at night, demonstrating their effective illumination for large outdoor areas.

7. וישאַלט

The LEDONE Wall Pack Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• רייניקונג: Periodically clean the exterior of the fixture, especially the lens and photocell, with a soft, damp cloth to remove dirt, dust, and debris. Ensure power is OFF before cleaning. Do not use abrasive cleaners or solvents.
• דורכקוק: יערליך קאנטראלירט די פיקסטשער פאר יעדע סימן פון שאדן, פרייע דראטן, אדער קאראזיע. זיכערט זיך אז אלע בארג-שרויפן זענען פעסט צוגעפאסט.
• פאָטאָסעל: Keep the photocell sensor clear of obstructions (e.g., leaves, dirt, paint) to ensure proper dusk-to-dawn operation.

8. טראָובלעשאָאָטינג

9. וואָראַנטי אינפֿאָרמאַציע

The LEDONE Full Cut Off 60W LED Wall Pack Light is covered by a לימיטעד וואָראַנטי. This product is designed for a long operational life of approximately 50,000 hours. For specific warranty terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact LEDONE customer service.

10. שטיצן

LEDONE is committed to providing quality lighting solutions and customer service. If you have any questions, require technical assistance, or need to report an issue with your product, please contact LEDONE customer support. Our team is based in California and ready to assist you.

For further assistance, please visit the official LEDONE webזייטל אדער זעט אייער קויפן דאקומענטאציע פאר קאנטאקט דעטאלן.