הקדמה
This manual provides essential information for the safe and efficient use of your Legrand Rotative Power Strip, Model 49464. This power strip features three earthed outlets, an LED indicator switch, and a unique rotating design for flexible power distribution. It is supplied without a cord and requires manual wiring.
זיכערקייַט אינסטרוקציעס
- Always disconnect the power strip from the main power supply before performing any wiring or maintenance.
- Ensure that the total power consumption of connected devices does not exceed the maximum rating of 16A / 230V.
- This product is designed for indoor use only. Avoid exposure to moisture, water, or extreme temperatures.
- Do not open or modify the power strip. Repairs should only be performed by qualified personnel.
- האַלטן אויס פון דערגרייכן פון קינדער.
- Ensure proper grounding when wiring the power strip.
פּעקל אינהאַלט
- 1 x Legrand Rotative Power Strip Housing (Model 49464)
Note: Power cord and fixing screws/collars are not included and must be purchased separately.
סעטאַפּ און וויירינג
- צוגרייטן די קאַבלע: Obtain a 3G 1.5 mm² power cable of the desired length. Strip the outer insulation and individual wire insulation (Live, Neutral, Earth) according to standard electrical practices.
- עפֿנט די האָוסינג: Carefully open the power strip housing to access the internal wiring terminals. Refer to the diagram below for guidance.
פיגורע 1: הויפּט view of the Legrand Rotative Power Strip. This image shows the overall design with three earthed sockets and the integrated LED switch. - פאַרבינדן די ווירעס: Connect the Live, Neutral, and Earth wires from your power cable to the corresponding terminals inside the power strip. Ensure all connections are secure and properly insulated.
Figure 2: Close-up of the earthed sockets. This image highlights the Type E sockets with their grounding pins and electrical ratings. - Close the Housing: Carefully reassemble the power strip housing, ensuring no wires are pinched.
- מאַונטינג אָפּציעס: The power strip offers flexible installation:
- פריישטייענדיק: Place the power strip on a flat surface. The integrated feet provide stability.
- וואַנט מאָונטינג: Use appropriate screws (not supplied) to fix the power strip to a wall. The design allows for secure attachment.
- Cable Tie Mounting: Secure the power strip using cable ties (not supplied) for temporary or flexible installations.
פיגורע 3: זייַט view of the power strip with feet extended, illustrating its freestanding capability and potential for mounting. 
פיגורע 4: פראָנט view of the power strip with feet extended, showing the overall form factor when placed on a surface.
אַפּערייטינג ינסטראַקשאַנז
- קאַנעקטינג צו מאַכט: Plug the wired power strip into a suitable wall outlet.
- מאַכט אויף / אַוועק: Use the integrated LED switch to turn the power strip on or off. The LED indicator will illuminate when the power strip is active.
- קאַנעקטינג דעוויסעס: Plug your electrical devices into the three earthed outlets. The sockets are oriented at 45° for standard plugs and one at 90° for larger transformers, optimizing space and preventing blockage.
- ראָוטייטינג פּלאַן: The cylindrical design allows you to rotate the power strip to orient the outlets as needed, providing flexibility for various plug types and cable management.
- Retractable Sockets: When not in use, the sockets can be retracted to prevent dust accumulation.
וישאַלט
- רייניקונג: Disconnect the power strip from the main power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- דורכקוק: Periodically inspect the power strip and its connected cable for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and consult a qualified electrician.
- שטויב שוץ: Utilize the retractable socket feature to minimize dust accumulation when outlets are not in use.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Power strip does not turn on (LED off). | No power from wall outlet, faulty wiring, or internal issue. |
|
| Devices connected are not receiving power. | Power strip is off, device is faulty, or overloaded circuit. |
|
| Overheating of the power strip. | איבערלאַסט, שלעכטע ווענטילאַציע, אדער אינערלעכע חסרון. |
|
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | 49464 |
| סאָרט | לעגראנד |
| נומער פון אַוטלעץ | 3 (Type E, Earthed) |
| Voltage | 230 וואלטס |
| מאַקסימום קראַנט | 16 Ampערעס |
| ספּעציעלע פֿעיִקייטן | Rotative design, LED indicator switch, Retractable sockets, 45°/90° oriented sockets |
| מאַטעריאַל | פּלאַסטיק |
| קאָליר | White and Dark Grey |
| שנור | Not supplied (requires 3G 1.5 mm² cable) |
| סמאַרט היים קאַמפּאַטאַבילאַטי | ניין |
| רעקאַמענדיד נוצן | Indoor settings, workspaces |
| לאַנד פון אָריגין | כינע |
וואָראַנטי און שטיצן
This Legrand product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Legrand webפּלאַץ.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand customer service through their official channels. Contact information can typically be found on the product packaging or the Legrand webפּלאַץ.
לעגראַנד באַאַמטער Webפּלאַץ: www.legrand.com