NVX XBBR2 X-Series 2-Channel Bass Restoration Processor User Manual

1. הקדמה

The NVX XBBR2 is an advanced 2-channel bass restoration processor and line output converter designed to enhance the low-frequency response of your car audio system. It features parametric bass controls, impedance matching, and various turn-on modes, making it compatible with both factory and aftermarket head units. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and longevity of your device.

Figure 1.1: NVX XBBR2 Bass Restoration Processor and Remote Level Control.

2. זיכערקייַט אינפֿאָרמאַציע

Please read all instructions carefully before installation and use. Failure to follow these guidelines may result in damage to the unit, your vehicle, or personal injury.

• שטענדיק אָפּשטעקן דעם נעגאַטיוון באַטעריע וואָקזאַל פֿון פֿאָרמיטל איידער איר הייבט אָן קיין עלעקטרישע אַרבעט.
• זיכער מאַכן אַז אַלע וויירינג איז ריכטיק ראָוטאַד און פארזיכערט צו פאַרמייַדן קניפּן אָדער קורץ קרייזן.
• ניצט צוגעפאסטע וויירינג פאר מאַכט און ערד קאַנעקשאַנז ווי ספּעסיפיצירט אין דער ינסטאַלירונג אָפּטייל.
• שטעלט נישט אויס דעם אַפּאַראַט צו פייכטקייט אָדער עקסטרעמע טעמפּעראַטורן.
• באַראַטן זיך מיט אַ פּראָפעסיאָנעלן אויטאָ אַודיאָ אינסטאַללער אויב איר זענט נישט זיכער וועגן קיין טייל פון די אינסטאַלאַציע פּראָצעס.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• NVX XBBR2 Bass Restoration Processor
• Wired Remote Bass Level Control
• Remote Control Cable (RJ11)
• מאַונטינג ייַזנוואַרג (סקרעווס)
• קליין שרויפנ - ציער
• באַניצער מאַנואַל (דעם דאָקומענט)

Figure 3.1: Wired Remote Bass Level Control and Cable.

Figure 3.2: Mounting Hardware and Screwdriver.

4. פּראָדוקט פֿעיִקייטן

The NVX XBBR2 offers a range of features designed for superior audio processing:

• Active 2-channel Bass Restoration Processor with Parametric Bass Controls
• Preamp (RCA) and Speaker-level Inputs (Works with both Factory and Aftermarket Systems)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection
• Load selection switch (20, 60, or 20K ohms) to prevent factory radio shut-down
• ווייערד ווייַט באַס מדרגה קאָנטראָל אַרייַנגערעכנט

Figure 4.1: High Output Voltage and Remote Bass Control.

Figure 4.2: Parametric Bass Controls for EQ Processing.

Figure 4.3: Auto Turn-On and Load Select Switches.

5. קאָנטראָלס און קאַנעקשאַנז

Familiarize yourself with the various controls and connection points on the XBBR2 unit.

Figure 5.1: Labeled Diagram of XBBR2 Inputs and Outputs.

5.1. Input Section

• High Level Input (L+, L-, R+, R-): Speaker-level inputs for connecting directly to a factory radio or amplifier's speaker outputs. These inputs can handle up to 225 Watts.
• Low Level Input (L, R): RCA inputs for connecting to an aftermarket head unit's preamp אַוטפּוץ.
• Load Select Switch (20KΩ, 60Ω, 20Ω): Adjusts the input impedance to prevent factory radios from shutting down due to sensing an incorrect load.

Figure 5.2: High and Low Level Input Terminals.

5.2. Output Section

• Output (L, R): RCA outputs to connect to your amplifier's input. Provides up to 9.5 Volts of output.
• Gain Knob (Min/Max): Adjusts the overall output level of the processed signal.
• קלעמערל געפירט: Illuminates when the output signal is clipping, indicating distortion. Adjust the Gain knob down if this LED is consistently lit.
• ווייַט פּאָרט: RJ11 port for connecting the wired remote bass level control.

Figure 5.3: RCA Output and Remote Port.

5.3. Power and Control Section

• +12V: Main power input (connect to constant +12V from battery).
• GND: Ground connection (connect to vehicle chassis).
• REM IN: Remote turn-on input (connect to head unit's remote output or ignition).
• REM OUT: Remote turn-on output (provides a 12V signal to turn on an ampלייבער).
• Turn On Mode Switch (AUD, DC, REM): Selects how the unit turns on. AUD for audio signal detection, DC for DC offset detection on speaker-level inputs, REM for traditional remote wire turn-on.
• Ground Isolation Switch (200Ω, ISO, GND): Helps eliminate ground loop noise. 200Ω adds resistance, יסאָ isolates grounds, GND directly connects grounds.
• מאַכט געפירט: Illuminates when the unit is powered on.

Figure 5.4: Power, Ground Isolation, and Output Controls.

5.4. Bass Restoration Controls

• Wide Knob: Controls the width of the bass restoration frequency band. Adjusts how broad or narrow the restored bass frequencies are.
• Sweep Knob: Selects the center frequency of the bass restoration. Allows you to choose which specific low frequencies are enhanced.

פיגורע 5.5: שפּיץ View with Wide and Sweep Controls.

6. סעטאַפּ און ייַנמאָנטירונג

Proper installation is crucial for the performance and safety of your XBBR2. It is recommended to have this unit installed by a qualified professional.

6.1. מאַונטינג אָרט

Choose a dry, well-ventilated location away from direct heat sources and moisture. Common locations include under a seat, in the trunk, or behind the dashboard. Ensure there is enough space for wiring and air circulation.

6.2. וויירינג קאַנעקשאַנז

1. מאַכט (+12 וו): Connect the +12V terminal to the vehicle's positive battery terminal using an appropriate gauge power wire (e.g., 14-18 gauge). Install an in-line fuse (not included) as close to the battery as possible.
2. ערד (GND): Connect the GND terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a solid, low-resistance connection.
3. ווייַט אַרייַנשרייַב (REM IN): Connect the REM IN terminal to your head unit's remote turn-on output. If using speaker-level inputs and auto turn-on, this connection may not be necessary.
4. Remote Output (REM OUT): Connect the REM OUT terminal to the remote turn-on input of your ampליפיער (ס).
5. אַרייַנשרייַב קאַנעקשאַן:
   • For Factory Radios (Speaker Level): Connect the vehicle's speaker wires directly to the XBBR2's High Level Input terminals (L+, L-, R+, R-). Ensure correct polarity.
   • For Aftermarket Radios (Preamp מדרגה): Connect RCA cables from your head unit's preamp outputs to the XBBR2's Low Level Input (L, R) RCAs.
6. רעזולטאַט קאַנעקשאַן: Connect RCA cables from the XBBR2's Output (L, R) RCAs to your ampליפֿער׳ס אײַנטריט.
7. ווייַט באַס קאָנטראָל: Plug the wired remote bass control cable into the Remote port on the XBBR2. Mount the remote control in an accessible location for easy adjustment.

6.3. Initial Switch Settings

• לאָדן אויסקלייַבן: Start with 20KΩ. If your factory radio shuts down or experiences issues, try 60Ω or 20Ω.
• קער אויף מאָדע: אויסקלייַבן REM if using a dedicated remote wire. If using speaker-level inputs without a remote wire, try AUD (audio detection) or DC (DC offset detection).
• ערד אפגעזונדערטקייט: Start with יסאָ. If you experience ground noise (hissing, whining), try 200Ω or GND to find the quietest setting.

7. אַפּערייטינג ינסטרוקטיאָנס

Once installed, the XBBR2 allows you to fine-tune your bass response.

1. מאַכט אויף: Turn on your head unit. The XBBR2's Power LED should illuminate.
2. שטעלן געווינען: With your head unit volume at about 75-80% of maximum, slowly increase the XBBR2's Gain knob until the Clip LED briefly flashes on the loudest bass notes. Then, back off the Gain slightly until the Clip LED rarely or never illuminates. This sets the maximum clean output.
3. Adjust Bass Restoration (Wide & Sweep): Play music with a good bass presence.
   • Sweep Knob: Rotate the Sweep knob to select the desired center frequency for bass enhancement. Experiment to find the frequency that best complements your music and speakers.
   • Wide Knob: Adjust the Wide knob to control the bandwidth of the bass restoration. A wider setting will affect a broader range of frequencies around the Sweep point, while a narrower setting will focus on a more specific frequency.
4. ווייַט באַס קאָנטראָל: Use the wired remote bass level control to adjust the overall bass output from the XBBR2 conveniently from your listening position. This control acts as a master volume for the bass restoration effect.

8. וישאַלט

The NVX XBBR2 requires minimal maintenance to ensure long-term performance.

• Keep the unit clean and free of dust and debris. Use a soft, dry cloth for cleaning.
• זיכער מאַכן אַז אַלע פֿאַרבינדונגען בלייבן זיכער. קאָנטראָלירט פּעריִאָדיש די וויירינג פֿאַר קיין וואונדער פון טראָגן אָדער קעראָוזשאַן.
• Do not block the ventilation openings on the unit, if any, to prevent overheating.

9. טראָובלעשאָאָטינג

If you encounter issues with your XBBR2, refer to the following common problems and solutions:

10. ספּעסאַפאַקיישאַנז

11. וואָראַנטי און שטיצן

NVX products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please visit the official NVX webזייטל אדער קאנטאקט זייער קאסטומער שטיצע גלייך. האלט אייער באווייז פון קויפן פאר גאראנטיע קליימס.

איר קענט געפֿינען מער אינפֿאָרמאַציע און שטיצע בײַ דער NVX Amazon Store.