Artemide Tolomeo Wall Surface Bracket Instruction Manual

פּראָדוקט איבערview

The Artemide Tolomeo Wall Surface Bracket (Model A025150) is an accessory designed for mounting various Artemide Tolomeo lamps directly to a wall surface. This bracket provides a stable and secure attachment point for compatible Tolomeo lamp models, allowing for flexible lighting solutions.

קאַמפּאַטאַבילאַטי: This bracket is compatible with Artemide Tolomeo Micro, Mini, Ordinary, and Braccio Wall lamps.

שליסל פֿעיִקייטן:

• Designed for wall mounting of Artemide Tolomeo lamps.
• געבויט פון דוראַבאַל אַלומינום.
• Lightweight design: approximately 0.33 lbs (0.15 kg).
• Country of Origin: Italy.

זיכערקייַט אינפֿאָרמאַציע

• לייענען אַלע ינסטראַקשאַנז קערפאַלי איידער ייַנמאָנטירונג.
• Ensure the mounting surface is structurally sound and capable of supporting the bracket and the attached lamp.
• Use appropriate tools and fasteners for your specific wall type (e.g., drywall anchors, wood screws, masonry anchors).
• If you are unsure about installation, consult a qualified electrician or professional installer.
• האַלטן קליין טיילן אַוועק פון קינדער.
• Do not modify the bracket in any way.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:

• Artemide Tolomeo Wall Surface Bracket (Model A025150)
• Note: Mounting hardware (screws, anchors) and the Tolomeo lamp are sold separately and are not included with this bracket.

סעטאַפּ און ינסטאַלירונג

This section provides general guidelines for installing the Artemide Tolomeo Wall Surface Bracket. Specific installation steps may vary based on your wall material and the type of Tolomeo lamp being mounted.

1. צוגרייטן די מאַונטינג אָרט: Choose a suitable location on the wall that can support the weight of the bracket and the lamp. Ensure there are no electrical wires or plumbing pipes behind the drilling area.
2. מאַרקירן דרילינג פונקטן: Hold the bracket against the wall at the desired height and position. Use a pencil to mark the locations for the mounting screws. Ensure the bracket is level before marking.
3. בויער פּילאָט האָלעס: Using an appropriate drill bit for your wall type and chosen fasteners, drill pilot holes at the marked locations. If using wall anchors, insert them now according to their instructions.
4. צוטשעפּען די בראַקאַץ: Align the bracket with the drilled holes and secure it to the wall using suitable screws. Tighten the screws firmly but do not overtighten, which could damage the bracket or wall.

בילד 1: פראָנט view of the Artemide Tolomeo Wall Surface Bracket, showing its aluminum finish and mounting design.
5. Mount the Tolomeo Lamp: Once the bracket is securely installed, attach your compatible Artemide Tolomeo lamp according to its specific instructions. The bracket is designed to receive the lamp's mounting arm or base.


Image 2: The Artemide Tolomeo Wall Surface Bracket shown with a compatible Tolomeo lamp arm attached, demonstrating its functional use.

6. לעצט טשעק: Gently test the stability of the installed bracket and lamp to ensure it is secure and properly mounted.


בילד 3: א נאָענטע בילד view of the Artemide Tolomeo Wall Surface Bracket, highlighting its aluminum construction and design details.

אַפּערייטינג ינסטראַקשאַנז

The Artemide Tolomeo Wall Surface Bracket serves as a fixed mounting point for your Tolomeo lamp. Its operation is passive, providing structural support. The functionality and operation of the lamp itself are governed by the lamp's individual instruction manual.

וישאַלט

• רייניקונג: To clean the bracket, wipe it with a soft, dry cloth. For stubborn marks, a slightly damp מען קען ניצן אַ שטאָף מיט מילדער זייף, און דערנאָך גוט אויסטריקענען. פֿאַרמייַדן אַברייסיוו רייניגער אָדער סאָלווענטן.
• דורכקוק: Periodically check the bracket and its mounting screws for any signs of loosening or damage. Tighten screws if necessary.
• ינווייראַנמענאַל טנאָים: Ensure the bracket is used in dry indoor environments. Avoid exposure to excessive moisture or extreme temperatures.

טראָובלעשאָאָטינג

• Bracket feels loose after installation: Ensure all mounting screws are properly tightened. If using wall anchors, verify they are correctly installed and suitable for the wall material. The wall itself might not be strong enough; consider reinforcing the mounting area or choosing a different location.
• Lamp does not fit the bracket: Confirm that your Tolomeo lamp model is listed as compatible with this bracket (Micro, Mini, Ordinary, Braccio Wall lamps). Refer to your lamp's manual for its specific mounting requirements.
• Scratches or damage during installation: Handle the bracket carefully during installation. Use appropriate tools and techniques to prevent cosmetic damage.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official Artemide website. For technical support or inquiries, please contact Artemide customer service directly.