1. הקדמה
This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RT9 & VP LED Strip Controller Kit. This kit is designed to provide versatile control over RGB and RGBW LED strips, offering features such as multi-zone control, color adjustment, and brightness dimming via a 2.4GHz RF wireless remote.
2. זיכערקייַט אינפֿאָרמאַציע
- פאַרזיכערן די אַרייַנשרייַב וואָלtage (12V/24V DC) matches the requirements of both the controller and the LED strips. Incorrect voltage קען שאַטן.
- Do not exceed the maximum output current or power ratings of the controller. Overloading can lead to overheating and failure.
- Always disconnect power before making any wiring connections to prevent electrical shock.
- Install the controller in a dry, well-ventilated area. Avoid exposure to moisture, high temperatures, or corrosive environments.
- דער פּראָדוקט איז דיזיינד בלויז פֿאַר דרינענדיק נוצן.
- האַלטן אויס פון דערגרייכן פון קינדער.
3. פּעקל אינהאַלט
באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:
This image displays the complete contents of the BTF-LIGHTING RT9 & VP LED Strip Controller Kit, including the remote control, VP receiver, instruction manual, two AAA batteries, and a wall-mounted remote holder.
- 1 x RT9 RF 2.4GHz Wireless Remote Control
- 1 x VP 4-Channel LED Controller (Receiver)
- 1 x Remote Wall Mount Bracket
- 2 x AAA באַטעריעס (פֿאַר ווייַטקאָנטראָל)
- 1 x באַניצער מאַנואַל (דאָס דאָקומענט)
4. ספּעסאַפאַקיישאַנז
| שטריך | באַשרייַבונג |
|---|---|
| מאָדעל נומער | JQGD RT9+VP |
| אַרייַנשרייַב וואָלtage | 12/24 וו דק |
| אַרייַנשרייַב קראַנט (מאַקסימום) | 15.5 א |
| רעזולטאַט חלקtage | 4 x (12/24)V DC |
| רעזולטאַט קראַנט | 4 channels, 4A/channel, Max 6A total |
| רעזולטאַט מאַכט (מאַקס) | 4 x (48/96)W |
| רעזולטאַט טיפּ | קעסיידערדיק וואָלtage |
| אַרייַנשרייַב סיגנאַל | רף 2.4 גהז |
| קאָנטראָל דיסטאַנסע | 30 מעטער (באַריער-פֿרײַער פּלאַץ) |
| Dimming Gray Scale | 4096 (2 ^ 12) לעוועלס |
| דימינג ראַנגע | 0-100% |
| פּוום אָפטקייַט | 750 הז (פעליקייַט) |
| אָפּעראַציע טעמפּעראַטור | -30°C ~ +55°C |
| IP שאַץ | IP20 |
| קעיס טעמפּעראַטור (מאַקס) | טק: +85°C |
| דרינענדיק / דרויסנדיק באַניץ | דרינענדיק |
5. סעטאַפּ
5.1. וויירינג דיאַגראַמע
Follow the diagram below for correct electrical connections. Ensure all connections are secure before applying power.
This diagram illustrates the correct wiring connections for the VP 4CH LED Controller. It shows the AC 100-240V power adapter connecting to the controller's input, and the controller's output connecting to the RGB/RGBW LED strip lights. The remote controller is also shown for reference.
- Connect your 12V or 24V DC power adapter to the input terminals of the VP controller. Ensure the positive (+) and negative (-) terminals are correctly matched.
- Connect the LED strip to the output terminals of the VP controller. For RGBW strips, connect the Red (R), Green (G), Blue (B), and White (W) wires to their respective terminals, and the common positive (+) wire to the V+ terminal. For RGB strips, connect R, G, B, and V+.
- זיכער מאַכן אַז אַלע פֿאַרבינדונגען זענען פֿעסט און איזאָלירט צו פֿאַרמייַדן קורץ־קרייזן.
5.2. קאָנטראָללער איבערview
Familiarize yourself with the controller's ports and indicators.
א דיטיילד view of the VP LED Controller, indicating the power input terminals (12-24VDC), DC socket input, match key, LED indicator, and the output terminals for Red, Green, Blue, and White LED channels, along with the common positive (+) output.
- מאַכט אַרייַנשרייַב: Terminals for 12-24V DC power supply.
- DC Socket Input: Alternative power input via a DC barrel jack.
- גלייכונג שליסל: Used for pairing the remote control.
- LED ינדיקאַטאָר: Shows the status of the controller (e.g., pairing mode, signal reception).
- רעזולטאַט טערמינאַלס: Labeled V+, R, G, B, W for connecting LED strips.
5.3. ווײַט־פֿאַרבינדונג
To pair the RT9 remote control with the VP controller:
- Ensure the VP controller is powered on and connected to the LED strip.
- Within 3 seconds of powering on the controller, press the 'Match' key on the VP controller once. The LED indicator on the controller will flash.
- Immediately press any button on the RT9 remote control.
- If pairing is successful, the LED strip will flash a few times, indicating a successful connection.
- If pairing fails, repeat the steps. Ensure the remote is within range and its batteries are functional.
6. אַפּערייטינג ינסטרוקטיאָנס
6.1. Basic Remote Functions
The RT9 remote control allows for comprehensive management of your LED lighting. Insert the two AAA batteries into the remote before use.
This image demonstrates the wireless transmission capability of the RT9 remote, allowing control of individual lighting zones (Zone 1 to Zone 4 and more) within a 30-meter distance in a barrier-free space. The remote can control multiple LED bulbs or strips in different areas of a home.
- מאַכט קנעפּל: Turns the connected LED strips on or off.
- קאָליר ראָד: Touch the color wheel to select any desired color.
- ברייטנאַס אַדזשאַסטמאַנט: ניצט די העלקייט אַרויף/אַראָפּ קנעפּלעך צו סטרויערן די אינטענסיטעט פון ליכט.
- Mode Buttons (S1, S2): Cycle through pre-programmed dynamic lighting modes.
- Zone Selection (1, 2, 3, 4): Select individual zones to control them independently. Press and hold a zone button to link/unlink a controller to that zone.
- RGB/W Buttons: Directly select Red, Green, Blue, or White colors.
6.2. Zone Control
The RT9 remote supports up to 4 independent zones, allowing you to control different sets of LED strips separately or together.
This diagram illustrates how multiple VP controllers can be linked together to extend the wireless control range. Each controller can communicate with others within a 30-meter radius, allowing for a larger network of controlled LED strips.
- To assign a controller to a zone: Power on the controller, then within 3 seconds, press the 'Match' key on the controller. Immediately press the desired zone number (1-4) on the remote. The LED strip will flash to confirm assignment.
- To control a specific zone, press its corresponding number button on the remote.
- To control all zones simultaneously, press the 'All' button (if available on your remote model, or cycle through zones).
6.3. Product Feature Videos
This video demonstrates the color-changing capabilities and brightness adjustment of the RGBW 5050SMD LED strip light when controlled by the BTF-LIGHTING system. It showcases the range from 1% to 100% brightness and millions of available colors.
This video provides a visual guide on how to use the RT9 remote control with the VP LED strip controller. It shows the remote's functions for changing colors (RGB and white), adjusting brightness, and selecting different lighting modes for 4-pin and 5-pin LED strips.
7. וישאַלט
- רייניקונג: ווישט אָפּ דעם קאָנטראָללער און ווײַטקאָנטראָל מיט אַ טרוקענעם, ווייכן שטאָף. ניצט נישט קיין שאַרפע כעמיקאַלן אָדער שרײַבנדיקע רייניקונגס־מיטלען.
- באַטערי פאַרבייַט: Replace the remote control batteries (2x AAA) when the control range decreases or the remote becomes unresponsive.
- סטאָרידזש: If storing the kit for an extended period, remove batteries from the remote and store in a cool, dry place.
8. טראָובלעשאָאָטינג
| אַרויסגעבן | מעגלעך סיבה / לייזונג |
|---|---|
| די על-אי-די סטריפּ צינדט זיך נישט אָן. |
|
| Remote does not control the LED strip. |
|
| אומרעכטע פארבן אדער פליקעריי. |
|
| לימיטירטע קאנטראל קייט. |
|
9. וואָראַנטי און שטיצן
BTF-LIGHTING products are manufactured to high standards and undergo rigorous testing. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.
If you encounter any issues or require technical assistance, please contact BTF-LIGHTING customer support through the retailer's platform or the official BTF-LIGHTING website. Please have your product model number (JQGD RT9+VP) and purchase information ready when contacting support.