VEVOR PA250 עלעקטריק כויס באַניצער מאַנואַל

1. הקדמה

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your VEVOR PA250 Electric Hoist. Please read and understand all instructions before using the product. Keep this manual for future reference.

Figure 1: VEVOR PA250 Electric Hoist with key dimensions (Length: 13.5", Width: 5.5", Height: 7.8"). This image shows the overall structure of the hoist, including the motor, cable drum, hook, and remote control.

2. זיכערקייַט אינסטרוקציעס

Always prioritize safety when operating the electric hoist. Failure to follow these instructions may result in serious injury or property damage.

• לייענען דעם מאַנואַל: Ensure all operators have read and understood this manual before use.
• וואָג לימאַץ: Never exceed the rated lifting capacity of the hoist (125 kg / 275 lbs for single line, 250 kg / 550 lbs for double line with pulley hook).
• דורכקוק: Before each use, inspect the hoist, cable, hook, and mounting for any signs of wear, damage, or malfunction. Do not use if damaged.
• סטאַביל מאָונטינג: Ensure the hoist is securely mounted to a structure capable of supporting the hoist's weight plus the maximum load.
• קלאָר שטח: האַלט דעם הייבן־געגנט ריין פֿון פּערסאָנאַל און שטערונגען. קיינמאָל נישט הייבן לאַסטן איבער מענטשן.
• Balanced Load: זיכער מאַכן אַז די לאַסט איז ריכטיק באַלאַנסירט און זיכער געמאַכט איידער איר הייבט עס.
• מאַכט צושטעלן: Connect the hoist to a grounded power outlet with the correct voltage (220 Volts) and frequency.
• Emergency Stop: מאַכט זיך באַקאַנט מיט דער נויטפאַל סטאָפּ פּראָצעדור.
• Avoid Side Pulling: Do not use the hoist for side pulling or dragging loads. Lift vertically only.
• ינווייראַנמענאַל טנאָים: Do not operate the hoist in hazardous environments, such as those with explosive atmospheres or excessive moisture.

3. פּראָדוקט איבערview

The VEVOR PA250 Electric Hoist is designed for efficient and reliable lifting operations in various settings.

3.1 שליסל קאָמפּאָנענטן און פֿעיִקייטן

• Full Copper Motor: Equipped with a robust copper wire motor for enhanced durability and performance.

Figure 2: Detail of the hoist's motor, highlighting its full copper winding for improved efficiency and lifespan.
• High-Efficient Lifting: Offers versatile lifting capacities depending on the configuration.


Figure 3: Illustration of the hoist's lifting capabilities: 275 lbs (125 kg) with a single line and 550 lbs (250 kg) with a double line using the pulley hook.

• Durable Pulley Hook & Cable: Features a strong steel cable and a robust hook, with an additional pulley hook for increased capacity.


פיגורע 4: דעטאַילעד view of the heavy-duty pulley hook and the durable steel cable, essential for secure lifting operations.

• ווייַט קאָנטראָל: Wired remote control for safe operation from a distance, featuring intuitive 'UP' and 'DOWN' buttons.

Figure 5: The wired remote control unit, showing the 'UP' and 'DOWN' buttons for precise load manipulation.
• לימיט באַשטימען: Integrated safety limit switch to prevent over-lifting or over-lowering, protecting the hoist and the load.


Figure 6: The limit switch, a crucial safety feature that automatically stops the hoist when the hook reaches its upper or lower travel limits.

4. סעטאַפּ און ייַנמאָנטירונג

Proper installation is crucial for the safe and effective operation of your electric hoist.

4.1 מאָונטינג די כויס

1. אויסקלייַבן אָרט: Choose a mounting location that is structurally sound and capable of supporting at least 1.5 times the maximum rated load of the hoist.
2. מאָונטינג בראַקאַץ: Securely attach the hoist's mounting brackets to a suitable beam or support structure using appropriate hardware (not included). Ensure all bolts are tightened to the manufacturer's specifications.
3. רעשוס: Ensure there is adequate clearance around the hoist for operation and maintenance, and that the cable can move freely without obstruction.

4.2 עלעקטריקאַל קאַנעקשאַן

1. מאַכט רעקווירעמענץ: Verify that your power supply matches the hoist's requirements (220 Volts, 500 Watts).
2. גראָונדעד אָוטלעט: Plug the hoist into a properly grounded electrical outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the hoist's power requirements.
3. קאַבלע פאַרוואַלטונג: Route the power cable and remote control cable to prevent entanglement or damage during operation.

4.3 Pulley Hook Installation (for Double Line Operation)

To achieve the maximum lifting capacity (250 kg / 550 lbs), install the pulley hook:

1. Loop the steel cable through the pulley wheel of the auxiliary hook.
2. Attach the end of the cable back to the hoist body at the designated anchor point.
3. Ensure the cable is seated correctly in all grooves and the hook is free to move.

5. אַפּערייטינג ינסטרוקטיאָנס

Follow these steps for safe and effective operation of your VEVOR PA250 Electric Hoist.

1. פאַר-אָפּעראַציע טשעק: Before each use, perform a visual inspection of the hoist, cable, hooks, and mounting points for any damage or wear.
2. זיכער מאַכן די לאַסט: Attach the load securely to the hook. Ensure the load is balanced and the hook's safety latch is closed. For double line operation, ensure the pulley hook is correctly installed.
3. שטעלן זיך: Stand at a safe distance from the load and the hoist, ensuring a clear view of the lifting area.
4. Lift the Load: Press the 'UP' button on the remote control to slowly raise the load. Observe the load's stability. If the load swings or is unbalanced, lower it and re-secure it.
5. Lower the Load: Press the 'DOWN' button to slowly lower the load. Guide the load if necessary, but never use your hands directly on the load while it is moving.
6. Limit Switch Activation: The hoist will automatically stop if the limit switch is activated (e.g., when the hook reaches its highest or lowest point). Do not attempt to override this safety feature.
7. נאָך אָפּעראַציע: Once the task is complete, lower the hook to a safe position, disconnect the power, and store the remote control safely.

6. וישאַלט

רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און זיכערע אפעראציע פון ​​אייער הייבער.

• טעגלעך דורכקוק: Visually inspect the cable for fraying, kinks, or corrosion. Check the hook for deformation or cracks. Ensure all fasteners are tight.
• Cable Lubrication: Periodically lubricate the steel cable according to the manufacturer's recommendations to prevent rust and wear.
• רייניקונג: Keep the hoist body clean and free of dust, dirt, and debris. Do not use high-pressure water or solvents that could damage electrical components.
• מאָטאָר ווענטאַליישאַן: Ensure the motor's ventilation openings are clear to prevent overheating.
• פאַכמאַן סערוויס: For any complex repairs or internal component issues, contact qualified service personnel.

7. טראָובלעשאָאָטינג

די סעקציע באהאנדלט אלגעמיינע פראבלעמען וואס איר קענט באגעגענען מיט אייער עלעקטרישן הייבער.

8. ספּעסאַפאַקיישאַנז

Technical details for the VEVOR PA250 Electric Hoist.

פיגורע 7: עקסamples of typical environments where the VEVOR electric hoist can be effectively used, including workshops, garages, and industrial settings.

9. וואָראַנטי און שטיצן

For warranty information, technical support, or to inquire about replacement parts, please contact VEVOR customer service through their official webוועבזייטל אדער דעם פארקויפער וואו דער פראדוקט איז געקויפט געווארן. האַלט אייער קויף קוויטל ווי א באווייז פון קויפן.