LiebeWH 5S Li-ion Battery Protection Board (18.5V/21V 15A)

1. הקדמה

This manual provides essential information for the proper installation, operation, and maintenance of your LiebeWH 5S Li-ion Battery Protection Board. This board is designed to manage and protect 5 series Li-ion battery cells, commonly used in electric power tools and other applications requiring 18.5V (nominal) to 21V (full charge) battery packs with a maximum discharge current of 15A. It integrates critical protection features to ensure battery longevity and safe operation.

2. זיכערקייַט אינפֿאָרמאַציע

• Always handle Li-ion batteries with extreme care. Incorrect handling can lead to fire, explosion, or severe injury.
• Ensure all connections are correct before applying power. Reverse polarity can damage the protection board and batteries.
• Do not exceed the specified maximum discharge current of 15A.
• Use appropriate wiring gauges for the current draw to prevent overheating.
• האַלט די ברעט אַוועק פון נעץ, שטויב און עקסטרעמע טעמפּעראַטורן.
• Installation should be performed by individuals familiar with electronics and battery systems.
• Do not attempt to modify or repair the protection board.

3. פּראָדוקט איבערview

The LiebeWH 5S Li-ion Battery Protection Board is a Battery Management System (BMS) designed for 5-series lithium-ion battery packs. It provides essential protection functions to safeguard your battery cells.

Figure 1: The protection board supports overcharge, over-discharge, and short circuit protection.

שליסל פֿעיִקייטן:

• אָווערטשאַרדזש שוץ: Prevents individual battery cells from being charged beyond their safe voltage שיעור.
• איבער-אָפּזאָגן שוץ: שטעלט אפ די אויסלאזונג ווען צעלן דערגרייכן זייער מינימום זיכערע וואליוםtagע, פאַרהיטן שאָדן.
• קורץ קרייַז שוץ: Automatically cuts off power in case of a short circuit to prevent damage and fire.
• סטאַביל פאָרשטעלונג: Provides reliable protection for 5S battery configurations.
• Integrated Charging/Discharging: The charging and discharging connectors are shared, simplifying wiring.

פיגורע 2: שפּיץ view of the LiebeWH 5S Li-ion Battery Protection Board.

פיגורע 3: דנאָ view of the LiebeWH 5S Li-ion Battery Protection Board.

4. ספּעסאַפאַקיישאַנז

5. סעטאַפּ און ייַנמאָנטירונג

Careful wiring is crucial for the correct function and safety of the battery pack. Refer to the diagram below for connection points.

Figure 4: Connection points on the LiebeWH 5S Li-ion Battery Protection Board.

1. צוגרייטן באַטעריז: Ensure your 5 Li-ion cells are balanced in voltage before connecting them to the BMS.
2. אידענטיפיצירן פֿאַרבינדונג פונקטן: The board has specific pads for battery connections (B-, B1, B2, B3, B4, B+) and main power connections (P-, P+).
   • ב-: Connect to the negative terminal of the first battery cell (Cell 1 negative).
   • ב1: Connect to the positive terminal of Cell 1 and the negative terminal of Cell 2.
   • ב2: Connect to the positive terminal of Cell 2 and the negative terminal of Cell 3.
   • ב3: Connect to the positive terminal of Cell 3 and the negative terminal of Cell 4.
   • ב4: Connect to the positive terminal of Cell 4 and the negative terminal of Cell 5.
   • ב+: Connect to the positive terminal of the fifth battery cell (Cell 5 positive). This is the main positive terminal for the battery pack.
   • פּ-: This is the main negative output/input terminal for the load/charger.
   • פּ+: This is the main positive output/input terminal for the load/charger. This should be connected to B+.
3. וויירינג סיקוואַנס: Connect the balance wires (B-, B1, B2, B3, B4, B+) in sequence from the lowest voltage point to the highest. Then connect the main discharge/charge wires (P- and P+).
4. באַשטעטיקן קאַנעקשאַנז: Double-check all connections for correct polarity and secure soldering. Incorrect wiring can lead to immediate damage.
5. Insulate: After installation, ensure all exposed connections are properly insulated to prevent short circuits.

6. אַפּערייטינג ינסטרוקטיאָנס

Once properly installed, the LiebeWH 5S Li-ion Battery Protection Board operates automatically to manage your battery pack. It continuously monitors the voltage of each cell and the overall current flow.

• טשאַרדזשינג: Connect your 21V Li-ion charger to the P+ and P- terminals. The board will manage the charging process, preventing overcharge of individual cells.
• אָפּזאָגן: Connect your electric power tool or other load to the P+ and P- terminals. The board will allow discharge up to 15A and will cut off power if any cell reaches its over-discharge threshold.
• שוץ אַקטאַוויישאַן: If an overcharge, over-discharge, or short circuit event occurs, the board will temporarily cut off power to protect the battery. Normal operation should resume once the fault condition is removed. For over-discharge, a charger connection may be required to reset the protection.

7. וישאַלט

The LiebeWH 5S Li-ion Battery Protection Board is designed for low maintenance. However, following these guidelines can help ensure its longevity:

• האַלטן ריין: Periodically inspect the board for dust or debris and gently clean with a soft, dry brush if necessary.
• ויסמיידן נעץ: Ensure the board remains dry. Moisture can cause corrosion and short circuits.
• טעמפּעראַטור קאָנטראָל: Operate the battery pack and BMS within recommended temperature ranges. Extreme heat or cold can affect performance and lifespan.
• דורכקוקן קאַנעקשאַנז: Occasionally check that all soldered connections remain secure and free from corrosion.

8. טראָובלעשאָאָטינג

If you encounter issues with your battery pack or protection board, consider the following:

If problems persist, consult a qualified technician or contact LiebeWH customer support.

9. וואָראַנטי און שטיצן

Specific warranty details for the LiebeWH 5S Li-ion Battery Protection Board are not provided in this manual. For warranty claims or technical support, please refer to the retailer where the product was purchased or visit the official LiebeWH webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.

פאַבריקאַנט: LiebeWH

מאָדעל נומער: LiebeWHsknqe1d04g