EGLO G80 E26 LED Filament Bulb, 400lm, Warm White, Clear, Model 204663J Instruction Manual

הקדמה

This manual provides essential information for the safe and efficient use of your EGLO G80 E26 LED Filament Bulb, Model 204663J. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: EGLO G80 E26 LED Filament Bulb, front view.

סעטאַפּ און ינסטאַלירונג

Follow these steps to install your LED filament bulb:

1. זיכערקייַט ערשטער: Before attempting any installation, ensure the power supply to the light fixture is turned OFF at the circuit breaker or wall switch.
2. לאָזן קאָאָלינג: אויב איר טוישט אויס אן עקזיסטירנדע גלאָביר, לאָזט די אַלטע גלאָביר גאָר אָפּקילן איידער איר נעמט זי אַרויס, כּדי צו פאַרמייַדן פֿאַרברענונגען.
3. אַראָפּנעמען אַלט ציבעלע: Carefully unscrew the old bulb from the E26 socket by turning it counter-clockwise.
4. ינסטאַלירן נייַ באַלב: Gently screw the EGLO G80 LED Filament Bulb into the E26 socket by turning it clockwise until it is snug. Do not overtighten.
5. ומקערן מאַכט: Once the bulb is securely installed, restore power to the light fixture.

וויכטיק: This bulb is designed for E26 base sockets only. Ensure your fixture is compatible before installation.

Figure 2: EGLO G80 E26 LED Filament Bulb with dimensions (Diameter 80mm x Height 120mm).

אַפּערייטינג ינסטראַקשאַנז

The EGLO G80 LED Filament Bulb operates like a standard light bulb. Once installed in a compatible fixture with power restored, simply use the fixture's switch to turn the light ON or OFF.

• מאַכט אויף / אַוועק: Use the wall switch or fixture switch to control the bulb's illumination.
• ניט-דימאַבלע: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or fixture, and will void the warranty.

Figure 3: EGLO G80 E26 LED Filament Bulb illuminated in a light fixture.

וישאַלט

The EGLO LED Filament Bulb requires minimal maintenance.

• רייניקונג: To clean the bulb, ensure the power is OFF and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• פאַרבייַט: When the bulb reaches the end of its rated life, replace it with a new EGLO G80 E26 LED Filament Bulb or a compatible E26 LED bulb.

טראָובלעשאָאָטינג

If your EGLO LED Filament Bulb is not functioning correctly, consider the following:

• ציבעלע טוט נישט ליכט אַרויף:
  • Check if the power switch for the fixture is ON.
  • Ensure the bulb is screwed in securely into the E26 socket.
  • באַשטעטיקן אַז דער קרייַז ברעיקער פֿאַר די פיקסטשער איז נישט אויסגעלאָשן.
  • Test the bulb in another working E26 fixture, or test another known working bulb in the original fixture to determine if the issue is with the bulb or the fixture.
• פליקער:
  • Ensure the bulb is not used with a dimmer switch, as this bulb is not dimmable.
  • Check for loose connections in the fixture or wall switch.

If problems persist after performing these checks, consult a qualified electrician or contact customer support.

ספּעסאַפאַקיישאַנז

וואָראַנטי אינפֿאָרמאַציע

This product comes with a warranty of up to 1 year. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details regarding coverage and claims.

קונה שטיצן

For further assistance, technical support, or warranty claims, please contact the retailer from whom you purchased the product or refer to the EGLO official webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.