Herdio 5.25'' Home Audio Package Wall Mount Bluetooth Amplifier Receiver System with In-Ceiling Wall Passive Speakers (Model HCS 528-16BT) Instruction Manual

1. זיכערקייַט אינפֿאָרמאַציע

Please read all safety instructions carefully before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• מאַכט מקור: ניצט נאָר דעם צוגעשטעלטן מאַכט אַדאַפּטער. זיכערט זיך אַז דער מאַכט צושטעל איז שטאַרק.tage פּאַסט צו די פּראָדוקט'ס באדערפענישן.
• וואַסער און נעץ: Do not expose this product to water, moisture, or extreme humidity. Avoid installation in areas where water contact is possible.
• היץ: אינסטאלירט נישט לעבן היץ קוועלער ווי ראַדיאַטאָרן, היץ רעגיסטערס, אויוון, אדער אנדערע אַפּאַראַטן וואָס פּראָדוצירן היץ.
• ווענטילאַטיאָן: ענשור געהעריק ווענטאַליישאַן אַרום די amplifier unit. Do not block any ventilation openings.
• ייַנמאָנטירונג: Installation should be performed by qualified personnel following local electrical codes. Ensure all wiring is secure and properly insulated.
• רייניקונג: Disconnect power before cleaning. Use a dry cloth only. Do not use liquid cleaners or aerosol cleaners.
• סערוויס: דו זאלסט נישט פּרווון צו דינען דעם פּראָדוקט זיך. קאָנטאַקט אַלע קוואַלאַפייד סערוויס פּערסאַנעל.

2. פּראָדוקט איבערview

The Herdio 5.25'' Home Audio Package provides a versatile sound solution for various indoor environments. It includes a wall-mount Bluetooth amplifier receiver and two 5.25-inch in-ceiling passive speakers. The system supports multiple audio input options, including Bluetooth, AUX, and USB, along with a microphone input for paging or announcements.

2.1. Wall Mount Bluetooth Ampלייפער ופנעמער

דעם סאָליד amplifier unit is designed to fit into a standard wall plate, offering convenient access to controls and connectivity. It features a master volume knob, input selection switch, USB port for media playback and device charging, a 3.5mm AUX-in jack, and a 1/4'' MIC-in jack.

פיגורע 1: וואנט בארג Amplifier Controls. This image displays the front panel of the wall-mount amplifier, detailing the power LED, input selection switch (AUX, BT, MIC), USB port, master volume/power knob, MIC IN jack, and AUX IN jack.

Figure 2: USB Interface. This image shows a USB flash drive inserted into the USB input port on the wall-mount amplifier, illustrating its function for media playback or device charging.

2.2. 5.25-inch In-Ceiling Passive Speakers

The system includes two 5.25-inch passive speakers designed for flush mounting in ceilings or walls. These speakers are engineered to reproduce clear sound with good responsiveness, suitable for various audio applications.

Figure 3: In-Ceiling Speaker Design. This image highlights the speaker's design, emphasizing its powerful bass capabilities and integrated coaxial tweeter for balanced audio output.

3. וואָס איז אין דער קעסטל

פֿאָרזיכטיק אויספּאַקן דעם אינהאַלט און זיכער מאַכן אַז אַלע זאַכן זענען דאָרט:

• 1x Bluetooth In-Wall Audio Receiver Wall Plate
• 1x 12V מאַכט צושטעלן
• 2x Screws for Wall Plate Installation
• 2x 5.25-inch In-Ceiling Speakers (Model HCS-528)
• 2x Speaker Wires
• 1x User Manual for Ampליפער
• 1x User Manual for Speakers
• 2x Gaskets for Speakers
• 1x Cutout Template for Speakers

Figure 4: Package Contents. This image displays all components included in the Herdio 5.25'' Home Audio Package, laid out for verification.

4. סעטאַפּ

4.1. וואנט בארג Ampהעכער ינסטאַלירונג

1. צוגרייטן די וואנט: Ensure you have a standard electrical wall box available for installation.
2. פאַרבינדן מאַכט קאַבלע: Connect the 12V DC power cable (red positive, black negative) to the two-pin connector on the back of the ampהעכער מאָדולע.
3. פאַרבינדן אַודיאָ קאַבל: Connect the stereo input audio cable to the three-pin connector on the back of the ampהעכער מאָדולע.
4. בארג די Ampלייבער: פֿאָרזיכטיק אַרײַנשטעלן די amplifier module into the wall box. Secure it using the provided screws.
5. צוטשעפּען פּנים־פּלאַטע: לייגט די דעקאָראַטיווע פּנים־פּלאַטע איבער די ampליפטער און באַוואָרענען עס.

פיגורע 5: וואנט בארג Amplifier Installation. This image illustrates the process of installing the wall-mount amplifier into a standard electrical box.

4.2. Ceiling Speaker Installation

1. באַשטימען אָרט: Choose appropriate locations in the ceiling or wall for the speakers, ensuring no obstructions behind the surface.
2. קאַט עפן: Use the provided cutout template to mark and cut a circular opening in the ceiling/wall. The cutout diameter is 7.3 inches (18.5 cm).
3. Remove Speaker Grille: Gently remove the speaker grille using a small tool or screwdriver.
4. אַרײַנשטעלן רעדנער: Insert the speaker into the cutout opening.
5. זיכערער רעדנער: Tighten the speaker clips with screws to firmly secure the speaker in place.
6. Replace Grille: Carefully place the speaker grille back onto the speaker.

Figure 6: Installation Dimensions. This diagram provides the total speaker diameter (8.46 inches / 21.5 cm), cutout diameter (7.3 inches / 18.5 cm), speaker depth (4.33 inches / 11 cm), and wall plate dimensions (4.5 inches / 11.43 cm height, 2.75 inches / 6.89 cm width).

Figure 7: Removing Speaker Grille. This image shows how to carefully remove the speaker's protective grille.

Figure 8: Securing Speaker Clips. This image demonstrates tightening the speaker clips with screws to ensure a secure fit in the ceiling or wall.

Figure 9: Replacing Speaker Grille. This image shows the final step of placing the speaker grille back onto the installed speaker.

4.3. וויירינג די סיסטעם

1. פֿאַרבינדן רעדנער דראָטן צו רעדנער: Connect the provided speaker wires to the terminals on the back of each speaker. Ensure red wire connects to positive (+) and black wire to negative (-).
2. פֿאַרבינדט רעדנער דראָטן צו Ampלייבער: Connect the other end of the speaker wires to the speaker output terminals on the back of the wall-mount amplifier. Use a screwdriver to loosen the terminal screws, insert the wires (red to SPK+, black to SPK-), and tighten the screws to secure the connection.
3. פאַרבינדן מאַכט צושטעלן: Plug the 12V power supply into a standard electrical outlet and connect its DC plug to the 12V DC input jack on the wall-mount ampליפער.

5. אַפּערייטינג ינסטרוקטיאָנס

5.1. אײַנשטעלן/אויסלעשן און וואָליום קאָנטראָל

To power on the system, turn the master volume knob clockwise. You will hear an audible 'drop' sound, and the power LED (PWR) will illuminate. Continue turning the knob clockwise to increase the volume. To power off, turn the knob counter-clockwise until it clicks.

5.2. ינפּוט סעלעקציע

Use the input selection switch on the amplifier's front panel to choose between AUX, BT (Bluetooth), or MIC inputs.

5.3. בלועטאָאָטה פּערינג

1. Switch the input selector to 'BT'. The Bluetooth LED will flash, indicating it is in pairing mode.
2. אויף אייער מאָבילער מיטל (סמאַרטפאָן, טאַבלעט, אאז"וו), אַקטיווירט בלועטוט און זוכט פֿאַר פֿאַראַן דעוויסעס.
3. Select 'Herdio' from the list of available devices to pair.
4. Once successfully paired, the Bluetooth LED on the amplifier will remain steadily lit.
5. You can now play audio from your device through the Herdio speaker system.

5.4. Using USB Input

Insert a USB flash drive into the USB INPUT port for media playback. The amplifier will automatically detect and play audio files. This port also functions as a charging port for compatible devices (5V/1A).

5.5. Using AUX-In

Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX IN jack using a stereo audio cable. Switch the input selector to 'AUX' to play audio from the connected device.

5.6. Using MIC-In

Connect a microphone to the 1/4'' MIC IN jack. Switch the input selector to 'MIC' for microphone input. This feature is suitable for paging or making announcements.

6. וישאַלט

To ensure the longevity and optimal performance of your Herdio audio system, follow these maintenance guidelines:

• רייניקונג: ניצן אַ ווייך, טרוקן שטאָף צו ריין די amplifier faceplate and speaker grilles. Avoid abrasive cleaners, solvents, or harsh chemicals.
• באַזייַטיקונג פון שטויב: Regularly dust the speaker grilles to prevent accumulation that could affect sound quality.
• ינווייראַנמענאַל טנאָים: Keep the system in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• וויירינג דורכקוק: Periodically check all wiring connections for tightness and signs of wear. Loose connections can lead to poor sound quality or intermittent operation.

7. טראָובלעשאָאָטינג

If you encounter issues with your Herdio audio system, refer to the following common problems and solutions:

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

This Herdio product is covered by a 1-יאָר סערוויס וואָראַנטי פֿון דעם קויפֿדאַטום. די וואָראַנטי דעקט פֿאַבריקאַציע חסרונות און אַרבעט אונטער נאָרמאַל נוצן.

די וואָראַנטי טוט נישט דעקן שעדיקן געפֿירט דורך:

• ימפּראַפּער ינסטאַלירונג אָדער אָפּעראַציע.
• Accidents, misuse, abuse, or negligence.
• אַנאָטערייזד ריפּערז אָדער מאָדיפיקאַטיאָנס.
• Power surges or lightning strikes.

For warranty claims, technical support, or customer service, please contact Herdio customer support through your retailer or visit the official Herdio webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע.