TICCI T8VB Vibrating Alarm Watch User Manual

הקדמה

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

זיכערקייַט אינפֿאָרמאַציע

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Do not attempt to open the watch casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

פּראָדוקט איבערview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

פיגורע 1: פראָנט view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

קנעפּל א: Mode Selection / Backlight
קנעפּל ב: Set / Adjust Up
קנעפּל C: Adjust Down / Start/Stop (Stopwatch/Countdown)
קנעפּל ד: לאַק / ופשליסן

סעטאַפּ

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. באַשטעטיקן צייט און דאַטע

1. From the Time Mode display, press and hold קנעפּל ב for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. דרוק קנעפּל א to cycle through the settings: Hour → Minute → Year → Month → Date.
3. ניצן קנעפּל ב to increase the flashing value and קנעפּל C צו פאַרמינערן עס.
4. Once all settings are adjusted, press קנעפּל ב נאכאמאל צו פארלאזן דעם סעטטינג מאָדוס.
5. To switch between 12-hour and 24-hour format, press קנעפּל C while the hour digits are flashing during time setting.

אַפּערייטינג ינסטראַקשאַנז

1. מאָדע סעלעקציע

דרוק קנעפּל א repeatedly to cycle through the different modes:

• צייט מאָדע: ווײַזט די איצטיקע צײַט, דאַטע און טאָג פֿון דער וואָך.
• שרעק מאָדע: Allows setting and managing up to 8 individual alarms.
• סטאַפּוואַטש מאָדע: פֿאַר צייט-פֿאַרבינדונגען צווישן געשעענישן.
• Countdown Mode: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. אַרייַן שרעק מאָדע דורך דרינגלעך קנעפּל א until "AL" appears on the display.
2. דריקן און האַלטן קנעפּל ב for approximately 2 seconds until the alarm number (1-8) flashes.
3. ניצן קנעפּל א to select the alarm you wish to set (A1, A2, A3, etc.).
4. דרוק קנעפּל ב to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. ניצן קנעפּל ב to adjust the hour and קנעפּל C צו סטרויערן די מינוט.
6. נאָך באַשטעטיקן די צייט, דריקן קנעפּל א to select the alarm type:
   • ביידע: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. דרוק קנעפּל ב to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use קנעפּל א to select the alarm, then press קנעפּל C to toggle its status.

3. קאַונטדאַון טייַמער

The countdown timer can be set from 15 minutes up to 24 hours.

1. אַרייַן קאָונטדאָוון מאָדע דורך דרינגלעך קנעפּל א until "TR" appears on the display.
2. דריקן און האַלטן קנעפּל ב for approximately 2 seconds until the hour digits flash.
3. ניצן קנעפּל ב to adjust the hour and קנעפּל C to adjust the minute for the countdown duration.
4. דרוק קנעפּל ב to save the countdown setting.
5. דרוק קנעפּל C to start or pause the countdown.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. סטאַפּוואַטש

1. אַרייַן סטאַפּוואַטש מאָדע דורך דרינגלעך קנעפּל א until "ST" appears on the display.
2. דרוק קנעפּל C צו אָנהייבן די סטאַפּוואַטש.
3. דרוק קנעפּל C נאכאמאל צו פּויזירן די סטאָפּוואַטש.
4. בשעת פּאָוזד, דריקן קנעפּל ב צו באַשטעטיק די סטאַפּוואַטש צו נול.

5. באַקלייט

דרוק קנעפּל א briefly in any mode to activate the super bright EL backlight for easy viewינג אין נידעריק-ליכט טנאָים.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• צו שלאָס the watch: Press and hold קנעפּל ב און קנעפּל C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• צו ופשליסן the watch: Press and hold קנעפּל ב און קנעפּל C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

וישאַלט

1. וואַסער קעגנשטעל

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is ניט רעקאַמענדיד for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. רייניקונג

Clean the watch and strap regularly with a soft, damp שטאָף. פֿאַרמײַדט ניצן שאַרפֿע כעמיקאַלן אָדער אַברייסיוו מאַטעריאַלן, וואָס קענען שאַטן די ענדיקונג אָדער די פֿאַרזיגלונגען.

3. באַטערי פאַרבייַט

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

טראָובלעשאָאָטינג

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• קנעפּלעך רעאַגירן נישט: The watch may be in lockout mode. Press and hold קנעפּל ב און קנעפּל C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• וואַסער אינעווייניק פון דער זייגער: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

ספּעסאַפאַקיישאַנז

Figure 4: Watch dimensions.

וואָראַנטי און שטיצן

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI webפּלאַץ.