הקדמה
This manual provides instructions for the safe and effective use of your YUSTDA Flat Fig8 Power Cord. This power cord is designed for compatibility with various electronic devices, including specific Technics audio receivers such as the SA-GX350, SA-GX390, SA-GX470, and SA-GX490. Please read this manual thoroughly before use.
Image: YUSTDA brand logo with "CHARGE UP" and "Professional Safety Power Supply" text.
זיכערקייַט אינפֿאָרמאַציע
Always observe the following safety precautions to prevent damage to the power cord or connected devices, and to ensure personal safety:
- Ensure the power cord is fully inserted into both the device and the power outlet.
- ניצט נישט דעם עלעקטרישן שנור אויב עס איז געשעדיגט, אויפגעריסן, אדער האט אויפגעדעקטע דראטן.
- ויסמיידן פּלייסינג שווער אַבדזשעקץ אויף די מאַכט שנור.
- Do not expose the power cord to water or excessive moisture.
- Unplug the power cord by gripping the plug, not by pulling the cable.
- This power cord is designed for indoor use only.
Image: Diagram illustrating safety features including Over-Temp Protection, Over Voltage Protection, Over Current Protection, and Short Circuit Protection, shown with a power adapter.
סעטאַפּ און קאַנעקשאַן
Follow these steps to connect your YUSTDA Flat Fig8 Power Cord:
- אידענטיפיצירן דעם ריכטיקן פּאָרט: Locate the Fig8 (C7) power input port on your electronic device (e.g., Technics receiver). This port is typically a two-pin, figure-eight shaped receptacle.
- פאַרבינדן צו מיטל: Align the Fig8 connector of the power cord with the device's input port. Gently push the connector firmly into the port until it is fully seated.
- Connect to power outlet: Insert the 2-prong polarized plug of the power cord into a standard wall power outlet. Ensure the plug is fully inserted.
- באַשטעטיקן פֿאַרבינדונג: Once connected, your device should be ready to receive power.
אַפּערייטינג ינסטראַקשאַנז
The YUSTDA Flat Fig8 Power Cord functions as a direct power supply for compatible devices. No specific operational steps are required for the cord itself beyond proper connection.
- Ensure the power cord is always connected securely during device operation.
- To disconnect power, first turn off the electronic device, then unplug the power cord from the wall outlet, and finally from the device.
וישאַלט און זאָרג
Proper maintenance extends the life of your power cord:
- רייניקונג: Disconnect the power cord from all power sources before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- סטאָרידזש: ווען נישט אין באַנוץ, דרייט דעם עלעקטרישן שנור לויז אויף. פֿאַרמייַדט אַ שטרענגע קנייטשונג אָדער קנייטשונג, וואָס קען שאַטן די אינעווייניקסטע דראָטן. האַלט אין אַ קיל, טרוקן אָרט אַוועק פון דירעקט זונשייַן און עקסטרעמע טעמפּעראַטורן.
- דורכקוק: Periodically inspect the power cord for any signs of damage, such as cuts, abrasions, or bent prongs. If any damage is found, discontinue use immediately and replace the cord.
Image: Cross-section diagram of a power cable showing High Quality Copper Wire and PVC Insulation Jacket.
טראָובלעשאָאָטינג
If your device is not receiving power, consider the following:
- קיין מאַכט:
- Ensure the power cord is securely plugged into both the device and the wall outlet.
- קאָנטראָלירט צי די וואַנט אַוטלעט אַרבעט דורך אַרײַנשטעקן אַן אַנדער דעוויס.
- Inspect the power cord for any visible damage. If damaged, replace it.
- פרייַ קשר:
- If the connection feels loose, ensure the Fig8 connector is fully inserted into the device's port.
If problems persist after checking these points, contact customer support.
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | YUSTDA |
| קאַנעקטער טיפּ | 2-Prong Polarized (Fig8 / C7) |
| קאַבלע לענג | 6 פֿיס (1.8 מעטער) |
| קאַמפּאַטאַבילאַטי | Devices requiring a Fig8 power cord, including Technics SA-GX350, SA-GX390, SA-GX470, SA-GX490 |
| זיכערקייַט פֿעיִקייטן | Over current protection, Total power protection, Over voltage protection, Short Circuit Protection |
| סערטיפיקאַטיאָנס | FCC, CE, RoHS |
| פּלאַן | Flat, Durable, Compact |
Image: Close-up of a power adapter plug, illustrating durable and compact design features, representative of YUSTDA product quality.
וואָראַנטי און שטיצן
YUSTDA products are manufactured with high-quality materials and undergo strict quality control. For any questions, issues, or warranty claims, please contact our customer support.
קונה סופּפּאָרט בליצפּאָסט: epcustomerservice@yahoo.com
Please provide your product details and a description of the issue when contacting support to ensure a prompt resolution.