U.S. Solid 100g 0.001g Digital Analytical Balance Precision Scale

הקדמה

This manual provides essential information for the proper operation and maintenance of your U.S. Solid Digital Analytical Balance. Please read this manual thoroughly before using the scale to ensure accurate measurements and prolong the life of the instrument. This precision scale is designed for laboratory and industrial applications requiring high accuracy measurements up to 100 grams with 0.001g readability.

זיכערקייַט אינפֿאָרמאַציע

• Always operate the scale on a stable, level, and vibration-free surface.
• Avoid placing the scale near strong electromagnetic fields, heat sources, or direct sunlight.
• איבערלאָדן נישט די וואָג איבער איר מאַקסימום קאַפּאַציטעט פון 100 ג.
• Keep the scale clean and free from dust, liquids, and corrosive substances.
• Handle the draft shield and weighing pan with care to prevent damage.
• Ensure the power adapter is correctly connected and use only the provided adapter.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן און אין גוטן צושטאַנד ביים אויספּאַקן.

• U.S. Solid Digital Analytical Balance
• Stainless Steel Weighing Pan
• Draft Shield (Windshield)
• אַק / דק מאַכט אַדאַפּטער
• Calibration Weight (typically 100g)
• באַניצער מאַנואַל (דעם דאָקומענט)

פּראָדוקט איבערview

Familiarize yourself with the main components and controls of the analytical balance.

שליסל קאַמפּאָונאַנץ:

• Weighing Pan: Stainless steel platform for placing items to be weighed.
• דראַפט שילד: Transparent enclosure to protect the weighing pan from air currents, ensuring stable and accurate readings.
• LCD ווייַז: Backlit screen showing weight readings, units, and other operational information.
• קאָנטראָל קנעפּלעך:
  • ON/OFF: מאַכט די וואָג אויף אָדער אַוועק.
  • UNIT: Cycles through available weighing units (g, ct, oz, lb, etc.).
  • PCS (Counting Mode): אַקטיוויזירט די שטיק צייל פונקציע.
  • CAL (Calibrate): הייבט אן דעם קאליבראציע פראצעס.
  • טאַר / נול: Resets the display to zero, or tares the weight of a container.
• לעוועלינג בלאָז: Indicates if the scale is perfectly level.
• אַדזשאַסטאַבאַל פֿיס: Used to level the scale.

סעטאַפּ

1. Placement and Leveling

For optimal accuracy, place the analytical balance on a firm, stable, and level surface, free from vibrations, drafts, and direct heat.

1. Place the scale on a sturdy workbench or table.
2. Adjust the four adjustable feet located at the bottom of the scale until the bubble in the leveling indicator is perfectly centered. This ensures the weighing mechanism is horizontal.

2. מאַכט קאַנעקשאַן

Connect the provided AC/DC power adapter to the power input port on the scale and then plug it into a suitable electrical outlet.

3. Warm-up Time

After connecting power, allow the balance to warm up for at least 30 minutes before use. This stabilizes the internal components and ensures accurate measurements. For best results, keep the scale powered on during periods of frequent use.

אַפּערייטינג ינסטראַקשאַנז

1. מאַכט אויף / אויסגעלאשן

• דרוק די ON/OFF button to turn the scale on. The display will show a self-test sequence and then settle at 0.000g.
• דריקן און האַלטן די ON/OFF קנעפּל צו אויסלעשן די וואָג.

2. קאַלאַבריישאַן

Calibration is crucial for maintaining accuracy. It is recommended to calibrate the scale before first use, after moving it, or if you suspect inaccurate readings.

1. Ensure the weighing pan is empty and the draft shield is closed.
2. דרוק די CAL button. The display will show "CAL" followed by the required calibration weight (e.g., "100.000g").
3. Carefully place the specified calibration weight (e.g., 100g) onto the center of the weighing pan.
4. Wait for the display to stabilize and show "PASS" or return to 0.000g, indicating successful calibration.
5. Remove the calibration weight. The scale is now ready for use.

3. ווייינג

1. Ensure the scale is powered on and displays 0.000g. If not, press טאַרע/נול.
2. Carefully place the item to be weighed onto the center of the weighing pan.
3. Close the draft shield to prevent air currents from affecting the reading.
4. Read the stable weight displayed on the LCD.
5. Remove the item from the pan.

4. טארע פונקציע

The tare function allows you to subtract the weight of a container, so only the net weight of the contents is measured.

1. Place an empty container on the weighing pan. The display will show its weight.
2. דרוק די טאַרע/נול button. The display will reset to 0.000g.
3. Add the substance to be weighed into the container. The display will now show only the weight of the substance.
4. To clear the tare, remove the container from the pan and press טאַרע/נול ווידער.

5. אַפּאַראַט קאַנווערזשאַן

The scale supports multiple weighing units.

• דרוק די UNIT button to cycle through the available weighing units (e.g., grams (g), carats (ct), ounces (oz), pounds (lb)).
• The currently selected unit will be displayed on the LCD.

6. Piece Counting (PCS)

This function allows you to count a large number of identical items by weighing a sample.

1. Place a known quantity of items (e.g., 10, 20, 50, 100 pieces) on the weighing pan.
2. דרוק די פּקס button. The display will show "PCS" and a number (e.g., "PCS 10").
3. דרוק די UNIT קנעפּל צו אויסקלייבן די sample size that matches the number of items you placed on the pan.
4. דרוק פּקס again to confirm the sample size. The display will now show the total count of items.
5. You can now add more items, and the scale will display the total count.
6. To exit counting mode, press the פּקס קנעפּל ווידער.

וישאַלט

1. רייניקונג

• שטענדיק דיסקאַנעקט די מאַכט אַדאַפּטער איידער רייניקונג.
• Wipe the scale's exterior with a soft, damp טוך. ניצט נישט קיין שרײַבנדיקע רייניגערס, סאָלווענטן, און טוט נישט אײַנטונקען די וואָג אין וואַסער.
• The stainless steel weighing pan can be removed and cleaned separately with mild soap and water. Ensure it is completely dry before placing it back on the scale.
• Clean the draft shield with a soft cloth to maintain visibility.

2. סטאָרידזש

• When not in use for extended periods, store the scale in a dry, dust-free environment at room temperature.
• Keep the draft shield in place to protect the weighing mechanism.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

U.S. Solid products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official U.S. Solid webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל פאר גאראנטיע טענות.

U.S. Solid Customer Service: ביטע באַזוכן www.ussolid.com פֿאַר קאָנטאַקט דעטאַלן און שטיצע רעסורסן.