BELVA BMRGBBK 6.5-inch Marine Speakers Instruction Manual

הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your BELVA BMRGBBK 6.5-inch 2-Way Coaxial Marine Speakers with Multi-Color LED Lighting. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your speakers.

זיכערקייַט אינפֿאָרמאַציע

• שטענדיק אָפּשטעקן די באַטאַרייע פֿון פֿאָרמיטל איידער איר הייבט אָן יעדע עלעקטרישע אינסטאַלאַציע.
• זיכער מאַכן אַז אַלע וויירינג איז ריכטיק איזאָלירט און פֿאַרזיכערט צו פאַרמייַדן קורץ קרייזן און שאָדן.
• Use appropriate personal protective equipment (PPE) during installation, such as safety glasses.
• Verify mounting locations are free of obstructions and provide adequate clearance for the speaker depth.
• Do not expose speakers to extreme temperatures or direct sunlight for prolonged periods when not in use.
• באַראַטן זיך מיט אַ פאַכמאַן אינסטאַללער אויב איר זענט נישט זיכער וועגן קיין טייל פון די ינסטאַלירונג פּראָצעס.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• BELVA BMRGBBK 6.5-inch Marine Speakers (2)
• Speaker Grilles (2)
• Speaker Wires (2 pairs)
• LED Controller Wire
• רף ווירעלעסס רימאָוט
• Stainless Steel Mounting Hardware (screws)

Image: BELVA BMRGBBK product box showing contents.

ספּעסאַפאַקיישאַנז

בילד: איבערview of BELVA BMRGBBK 6.5-inch marine speakers.

סעטאַפּ און ינסטאַלירונג

1. מאָונטינג די ספּיקערז

1. Choose a suitable mounting location that provides adequate space for the speaker and its depth (cutout dimensions: 5.44 inches). Ensure the surface is flat and stable.
2. Using the provided template (if included, otherwise measure carefully), mark the cutout area and screw holes.
3. Carefully cut the opening for the speaker.
4. בויער פּילאָט האָלעס פֿאַר די מאַונטינג סקרוז.
5. Insert the speaker into the opening and align the screw holes.
6. Secure the speaker using the provided stainless steel mounting screws. Do not overtighten.

בילד: פראָנט view of the BELVA BMRGBBK marine speaker.

בילד: ווינקלדיק view of the BELVA BMRGBBK marine speaker.

Image: Stainless steel mounting screws included with the speakers.

2. Audio Wiring

1. Connect the provided speaker wires to the speaker terminals. Ensure correct polarity (positive to positive, negative to negative). The speaker terminals are located on the rear of the speaker.
2. Route the speaker wires to your amplifier or head unit. Ensure wires are protected from sharp edges and heat sources.
3. Connect the other end of the speaker wires to the corresponding output channels of your ampליפיער אָדער קאָפּ אַפּאַראַט.

בילד: הינטערשטע view of the BELVA BMRGBBK marine speaker, highlighting the audio terminals.

Image: Speaker wires provided for audio connection.

3. LED Lighting Wiring

1. Connect the LED controller wire to the LED input on each speaker.
2. Connect the LED controller to a 12V DC power source (typically from the vehicle's electrical system). Ensure the power source is fused appropriately.
3. Secure the LED controller in a dry, accessible location.

Image: LED controller wire for connecting to the speakers.

Image: The LED controller unit.

אַפּערייטינג ינסטראַקשאַנז

געפירט ליגהטינג קאָנטראָל

The multi-color LED lighting is controlled using the included RF wireless remote. Ensure the LED controller is powered on.

Image: RF wireless remote for controlling the LED lighting.

• מאַכט קנעפּל: טוט אָן אָדער אויס די LED לייץ.
• מאָדע +/-: Cycles through different lighting modes (e.g., static colors, fading, flashing).
• SPEED +/-: Adjusts the speed of dynamic lighting modes.
• קאָליר +/-: Changes the static color of the LED lights.
• העל +/-: אַדזשאַסטירט די ברייטקייט פון די LED לייץ.
• דעמאָ: Activates a demonstration mode cycling through various effects.
• קאָליר קנעפּלעך: Direct selection of specific colors (Red, Green, Blue, White, Yellow, Cyan, Magenta, etc.).

Image: Speakers demonstrating multi-color LED illumination.

וישאַלט

• רייניקונג: רייניקט די רעדנערס מיט א ווייכן, דamp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the speaker grilles or cone material.
• דורכקוק: Periodically inspect all wiring connections for corrosion or damage. Ensure mounting screws remain tight.
• סטאָרידזש: If storing the vehicle or vessel for an extended period, ensure speakers are clean and dry.

טראָובלעשאָאָטינג

פּראָדוקט ווידעא

וואָראַנטי און שטיצן

וואָראַנטי אינפֿאָרמאַציע

This product comes with a limited warranty. Please refer to the warranty card included with your purchase or contact BELVA customer support for specific details regarding warranty coverage and terms.

קונה שטיצן

For technical assistance, troubleshooting, or warranty inquiries, please contact BELVA customer support. Contact information can typically be found on the manufacturer's webוועבזייטל אדער אויף דער פּראָדוקט פּאַקאַדזשינג.