BAITHNA DC12V Motorcycle Anti-Theft Alarm Security System Instruction Manual

הקדמה

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BAITHNA DC12V Motorcycle Anti-Theft Alarm Security System. This electronic anti-theft alarm system is designed to protect your motorcycle from theft with its remote control capabilities, including engine start, anti-hijacking, and adjustable sensitivity.

Image: The complete BAITHNA DC12V Motorcycle Anti-Theft Alarm System, including the main unit, siren, two remote controls, and wiring harness, shown alongside a motorcycle to illustrate its application.

פּעקל אינהאַלט

ביטע באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן אין אייער פּעקל:

• Main Alarm Unit
• Siren/Horn
• צוויי ווײַטקאָנטראָלן
• Wiring Harness with Fuse
• ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)

בילד: א קלאָר view of all individual components included in the BAITHNA DC12V Motorcycle Anti-Theft Alarm System package, including the main control unit, siren, two remote fobs, and the wiring loom.

ינסטאַלירונג אינסטרוקציעס

Proper installation is crucial for the optimal performance of the alarm system. It is recommended that installation be performed by a qualified technician.

וויכטיק הערות איידער ינסטאַלירונג:

• This product defaults to AC ignition mode.
• Before installation, confirm whether your motorcycle uses AC or DC ignition mode.
• If your DC ignition mode motorcycle is being installed with an "AC ignition mode alarm," you will need to purchase an additional relay. Refer to the "DC ignition motorcycle—B wiring diagram" for details.
• Install according to the provided wiring diagrams to prevent circuit damage.
• The main host device is made of waterproof silicone, offering improved waterproofing.

וויירינג דיאַגראַמז:

Refer to the following diagrams for correct wiring connections based on your motorcycle's ignition type.

Image: Detailed wiring diagrams illustrating connections for both AC ignition (Diagram A) and DC ignition (Diagram B) motorcycles. Diagram B highlights the need for a normal close relay for DC ignition systems when using an AC ignition alarm.

Image: An additional wiring diagram (Diagram C) for sound and flash alarm, accompanied by a reminder section and technical parameters for the system.

קאָמפּאָנענט דעטאַילס:

בילד: א נאָענטע בילד view of the inline fuse integrated into the wiring harness, essential for circuit protection.

Image: A close-up of the various wiring connectors, showing their design for secure and proper electrical connections.

אַפּערייטינג ינסטראַקשאַנז

The system is operated using the provided remote controls. Familiarize yourself with the remote's buttons and their functions.

Image: Two remote controls, each featuring buttons for arming, disarming, remote engine start, and alarm activation/deactivation.

רימאָוט קאָנטראָל פאַנגקשאַנז:

• אַרמינג: דרוק די שלאָס קנעפּל once to arm the alarm. The motorcycle will emit a sound, and the turn signals may flash.
• דיסאַרמינג: דרוק די ופשליסן קנעפּל once to disarm the alarm. The motorcycle will emit a sound, and the turn signals may flash.
• ווייטער מאָטאָר אָנהייב: דרוק די lightning bolt button twice quickly to start the engine remotely.
• Remote Engine Cut-Off / Anti-Hijacking: While the engine is running (either normally or via remote start), press the ופשליסן קנעפּל to cut off the engine and activate the alarm. This function is for emergency anti-hijacking.
• Alarm Activation (Panic Button): דרוק די גלאָק קנעפּל to activate the alarm siren and flashing lights immediately. Press again to stop.
• אַדזשאַסטאַבאַל סענסיטיוויטי: The alarm features 3 sensitivity levels. Consult the full product manual for specific instructions on adjusting sensitivity, as this may involve a sequence of button presses on the remote.

דעמאַנסטראַציע ווידעא:

The following video demonstrates the alarm system's functionality, including arming and disarming.

No official seller demonstration videos are available for embedding at this time.

וישאַלט

• ווייַט קאָנטראָל באַטאַרייע פאַרבייַט: If the remote control distance shortens or the LED indicator dims, replace the battery. The remote controls typically use 2* CR2025, 2* CR2016, or 27A batteries. Refer to the remote's internal markings for the exact battery type.
• וואָטערפּרופינג: The main alarm unit is designed with waterproof silicone. However, avoid submerging the unit in water or exposing it to extreme moisture for prolonged periods.
• רייניקונג: Clean the main unit and remote controls with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• וויירינג דורכקוק: Periodically check all wiring connections for corrosion or loose contacts to ensure reliable operation.
• Ultra-low Power Consumption: The system is designed for ultra-low power consumption to prevent battery drain. However, if the motorcycle is stored for extended periods, consider disconnecting the motorcycle battery or using a trickle charger.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the product packaging or contact BAITHNA customer service directly. Contact details are typically available on the manufacturer's official webוועבזייטל אדער דורך אייער קויפן-פונקט.

For additional information or to explore other products, visit the BAITHNA Store on Amazon.