BTMETER BT-846A Pro HVAC Anemometer Instruction Manual

1. פּראָדוקט איבערview

The BTMETER BT-846A is a professional HVAC anemometer designed for accurate measurement of wind velocity, air flow (CFM/CMM), and temperature. It features a separated, extendable wind sensor for flexible measurements and a large backlit LCD display for clear readings. This device is suitable for HVAC troubleshooting, air flow balancing, and various industrial or educational applications requiring precise air movement data.

Figure 1: BTMETER BT-846A Anemometer with its detachable vane sensor.

2. פּעקל אינהאַלט

Before use, please verify that all items are present and in good condition. If any items are missing or damaged, contact customer support.

• 1 x BTMETER BT-846A Anemometer Main Unit
• 1 x Detachable Vane Sensor
• 1 x USB Cable (for sensor connection)
• 1 רענטגענ 9 וו באַטערי
• 1 x קליינער שרויפנציהער
• 1 x ינסטרוקטיאָן מאַנואַל
• 1 x Carrying Storage Case

Figure 2: Contents of the BTMETER BT-846A package.

3. סעטאַפּ

3.1 באַטאַרייע ייַנמאָנטירונג

1. Locate the battery compartment cover on the back of the main unit.
2. Use the provided small screwdriver to unscrew the two screws securing the battery cover.
3. אַראָפּנעמען די באַטאַרייע דעקן.
4. Connect the included 9V battery to the battery clips, ensuring correct polarity.
5. Carefully place the battery into the compartment, ensuring the wires are not pinched.
6. Replace the battery cover and secure it with the two screws.

פיגורע 3: דערציען view of the anemometer, showing the battery compartment and tripod mounting hole.

3.2 Connecting the Vane Sensor

1. Locate the USB port on the side of the main unit, protected by a rubber cover.
2. Carefully open the rubber cover.
3. Connect the USB plug of the vane sensor cable into the USB port of the main unit.
4. פאַרזיכערן אַ זיכער קשר.

Figure 4: Connecting the vane sensor to the main unit via the USB cable.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1 מאַכט אויף / אַוועק

דריקן און האַלטן די מאַכט button (labeled with a circle and vertical line) to turn the device on or off. The device will automatically power off after 5 minutes of inactivity to conserve battery life.

4.2 Measuring Wind Velocity and Temperature

1. Ensure the vane sensor is connected.
2. Point the vane sensor into the air flow you wish to measure. The display will show real-time wind velocity and temperature readings.
3. To change wind velocity units (m/s, km/h, ft/min, knots, mph), press the UNIT קנעפּל.
4. To switch temperature units between Celsius (°C) and Fahrenheit (°F), press the ° C / ° F קנעפּל.

Figure 5: Measuring wind velocity and temperature with the anemometer.

4.3 Measuring Air Flow (CFM/CMM)

To measure air flow, you need to input the cross-sectional area of the duct or vent.

1. דרוק די VEL/FLOW button to enter CFM/CMM mode.
2. דרוק די UNIT button to select between FT² (for CFM) or M² (for CMM).
3. דרוק די SAMPLE AREA button to input the cross-sectional area. Use the arrow keys to adjust the value and אָפּציע אַרייַן צו באַשטעטיקן.
4. Once the area is set, the device will display the air volume in CFM or CMM.

4.4 Data Hold, Max/Min/Avg Readings

• דרוק די האַלטן קנעפּל צו איינפֿרירן די איצטיקע לייענונג אויף דער אַרויסווייַזונג. דריק ווידער צו לאָזן.
• דרוק די מאַקסימום / מין button to cycle through Maximum, Minimum, and Average wind velocity/flow readings.

4.5 באַקלייט

דרוק די ליכט button to turn the display backlight on or off. The backlight will automatically turn off after a short period to save battery life.

4.6 Data Recording and PC Connection

The device can record up to 600 groups of wind data. To utilize this feature and connect to a PC for real-time measurement or data download, use the provided USB cable and software (available via CD or download link).

• דרוק REC to start/stop data recording.
• דרוק לייענען צו view רעקאָרדעד דאַטן.
• Connect the main unit to your PC using the USB cable. Install the provided software to access recorded data and real-time measurements.

5. וישאַלט

• רייניקונג: ווישט אָפּ דאָס אַפּאַראַט מיט אַ ווייכן, טרוקענעם שטאָף. ניצט נישט קיין שרײַבנדיקע רייניגערס אָדער סאָלווענטן.
• סטאָרידזש: Store the anemometer in its carrying case in a dry, cool environment when not in use for extended periods. Remove the battery if storing for a long time to prevent leakage.
• סענסאָר פאַרבייַט: The separated wind speed sensor can be replaced if it becomes damaged, extending the service life of the main unit. Contact customer support for replacement parts.

6. טראָובלעשאָאָטינג

• אַפּאַראַט אַרבעט נישט אָן: קאָנטראָלירט צי די 9V באַטאַרייע איז ריכטיק אינסטאַלירט און האט גענוג אָפּצאָל. טוישט עס אויב נייטיק.
• נישט פּינקטלעכע לייענונגען: Ensure the vane sensor is clean and free from obstructions. Verify that the correct measurement units and cross-sectional area (for CFM/CMM) are selected.
• אַרויסווייַז פּראָבלעמען: If the display is blank or shows erratic readings, try replacing the battery. Ensure the sensor cable is securely connected.
• Backlight turns off too quickly: This is a design feature to conserve battery. Press the LIGHT button to reactivate the backlight.
• פּראָבלעמען מיט פּיסי פֿאַרבינדונג: Ensure the USB cable is properly connected to both the anemometer and the computer. Verify that the software is correctly installed.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

The BTMETER BT-846A Anemometer comes with a 12-חודש וואָראַנטי for any quality problems. For technical support, warranty claims, or replacement parts, please contact BTMETER customer service through their official webפּלאַץ אָדער די זיצער ווו די פּראָדוקט איז פּערטשאַסט.