GROHE New Tempesta 20 cm Chrome Head Shower (Model 27541001)

הקדמה

Thank you for choosing the GROHE New Tempesta 20 cm Chrome Head Shower. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower head. Please read these instructions carefully before installation and retain them for future reference.

Image: The GROHE New Tempesta 20 cm Chrome Head Shower, showcasing its polished chrome finish and spray nozzles.

סעטאַפּ און ינסטאַלירונג

This section outlines the steps for installing your GROHE New Tempesta head shower. Ensure all necessary tools and components are available before beginning.

Required Tools and Components:

• אַדזשאַסטאַבאַל מוטער-שליסל אָדער שעפּן
• פֿאָדעם פֿאַרזיגלונג טייפּ (PTFE טייפּ)
• ווייך שטאָף
• The GROHE New Tempesta Head Shower
• Existing shower arm with G 1/2" connection thread

ינסטאַלירונג סטעפּס:

1. צוגרייטן דעם שפּריץ אָרעם: Ensure your existing shower arm is clean and free of debris. Wrap thread seal tape (PTFE tape) clockwise around the threads of the shower arm to ensure a watertight seal.
2. Attach the Head Shower: Carefully screw the GROHE New Tempesta head shower onto the threaded end of the shower arm. The connection thread is G 1/2".
3. פאַרשטאַרקן זיכער: Hand-tighten the shower head until snug. Then, use an adjustable wrench or spanner to gently tighten it further, ensuring not to overtighten. Use a soft cloth between the wrench and the shower head to prevent scratching the chrome finish.
4. טשעק פֿאַר ליקס: Turn on the water supply and check for any leaks around the connection point. If leaks occur, tighten slightly more or reapply thread seal tape.

Image: Technical drawing illustrating the dimensions and G 1/2" connection thread of the GROHE New Tempesta head shower. The diameter is 200mm (20 cm) and the connection thread is G 1/2".

בילד: א נאָענטע בילד view of the G 1/2" connection point on the GROHE New Tempesta head shower, showing the threaded inlet.

אַפּערייטינג ינסטראַקשאַנז

Your GROHE New Tempesta head shower is designed for ease of use and provides a consistent showering experience.

שפּריץ מוסטער:

• The shower head features a Rain spray pattern, designed to provide a soft and even water distribution for a relaxing shower.

אַדזשאַסטינג די שפּריץ קאָפּ:

• The head shower is equipped with a פּילקע שלאָס that allows for a swivel angle of ± 20 דיגריז. This enables you to easily adjust the angle of the water spray to your preference.

Image: The GROHE New Tempesta head shower, highlighting the arrangement of nozzles that produce the Rain spray pattern.

וישאַלט

Proper care and maintenance will ensure the longevity and optimal performance of your GROHE New Tempesta head shower.

רייניקונג פון די קראָום ענדיקונג:

• To maintain the polished chrome finish, clean regularly with a soft cloth and a mild, non-abrasive cleaning agent.
• Avoid using harsh chemicals, abrasive cleaners, scouring pads, or solvents, as these can damage the chrome surface.
• שווענקט גוט אויס מיט ריינעם וואַסער נאָך רייניקונג און טריקנט מיט אַ ווייכן שטאָף צו פאַרמייַדן וואַסער פֿלעקן.

Cleaning the Spray Nozzles:

• The spray nozzles are designed to be easy to clean. Periodically rub the flexible silicone nozzles to dislodge any limescale or mineral deposits.
• For stubborn deposits, a solution of water and white vinegar (1:1 ratio) can be applied with a soft cloth, left for a few minutes, then rinsed off.

טראָובלעשאָאָטינג

If you encounter any issues with your GROHE New Tempesta head shower, refer to the common problems and solutions below.

נידעריק וואַסער לויפן:

• סיבה: Limescale buildup in the nozzles or a partially closed water supply valve.
• לייזונג: Clean the spray nozzles as described in the Maintenance section. Ensure the main water supply valve to your shower is fully open.

אַניוואַן שפּריץ מוסטער:

• סיבה: Blocked or partially blocked nozzles.
• לייזונג: Rub the flexible silicone nozzles to clear any blockages.

Leaking at Connection Point:

• סיבה: Insufficiently tightened connection or worn thread seal tape.
• לייזונג: Ensure the shower head is securely tightened to the shower arm. If the leak persists, unscrew the shower head, reapply fresh thread seal tape, and reattach.

ספּעסאַפאַקיישאַנז

Detailed technical specifications for the GROHE New Tempesta 20 cm Chrome Head Shower (Model 27541001).

וואָראַנטי און שטיצן

For information regarding warranty coverage, product registration, or technical support, please refer to the official GROHE website or contact GROHE customer service directly. Keep your proof of purchase for warranty claims.

גראָהע אפיציעל Webפּלאַץ: www.grohe.com