Laney A-Fresco-2 Acoustic Instrument Combo 60W User Manual

הקדמה

The Laney A-Fresco-2 is an ultra-compact acoustic instrument combo amplifier designed for versatility, portability, and reliability. Engineered in the UK, it features an ultra-efficient Class D power amplifier and a single 8-inch custom-designed full-frequency coaxial woofer. This combination delivers articulate, transparent acoustic sound with both punch and high-end clarity, faithfully reproducing your instrument's natural tone.

דאס amplifier operates on both mains power and internal rechargeable Li-Ion batteries, offering up to 24 hours of power for performances anywhere. With two independent channels, powerful EQ, and an auxiliary input, the A-Fresco-2 is suitable for various settings, from street performances to studio use.

וויכטיק סאַפעטי אינפֿאָרמאַציע

• לייענען אינסטרוקציעס: האַלטן דעם מאַנואַל פֿאַר צוקונפֿט רעפֿערענץ.
• מאַכט מקור: ניצט נאָר דעם ספּעציפֿירטן מאַכט אַדאַפּטער. זיכערט זיך אַז דער וואָלומעןtage פּאַסט צו אייער לאָקאַלע צושטעל.
• וואַסער און נעץ: Do not expose this appliance to rain or moisture. Do not use near water.
• ווענטילאַטיאָן: בלאָקירט נישט קיין ווענטילאַציע עפענונגען. אינסטאַלירט לויט די אינסטרוקציעס פונעם פאַבריקאַנט.
• היץ: דו זאלסט נישט ינסטאַלירן לעבן קיין היץ קוואלן אַזאַ ווי ראַדיאַטאָרס, היץ רעדזשיסטערז, סטאָוווז אָדער אנדערע אַפּאַראַט (אַרייַנגערעכנט ampליפיערס) וואָס פּראָדוצירן היץ.
• קאַבלעס: באַשיצן די מאַכט שנור פון גיין אויף אָדער פּינטשט, ספּעציעל אין די פּלאַגז, קאַנוויניאַנס רעסאַפּיז און די פונט ווו זיי אַרויסגיין פון די אַפּאַראַט.
• סערוויס: אָפּשיקן אַלע סערוויסעס צו קוואַלאַפייד סערוויס פּערסאַנעל. סערוויס איז פארלאנגט ווען דער אַפּאַראַט איז דאַמידזשד אין קיין וועג, אַזאַ ווי מאַכט צושטעלן שנור אָדער צאַפּן איז דאַמידזשד, פליסיק איז ספּילד אָדער אַבדזשעקץ זענען געפאלן אין די אַפּאַראַט, דער אַפּאַראַט איז יקספּאָוזד צו רעגן אָדער נעץ, אַרבעט נישט נאָרמאַלי , אָדער האט שוין דראַפּט.
• באַטערי זיכערקייַט: The unit contains a rechargeable Li-Ion battery. Do not attempt to replace the battery yourself. Dispose of batteries according to local regulations.

פּראָדוקט איבערview

The Laney A-Fresco-2 is a 60-watt acoustic instrument combo amplifier featuring a single 8-inch dual-cone speaker. It includes on-board digital effects and an FX loop for enhanced sound shaping. The amplifier is designed for acoustic instruments and offers two independent channels for versatile input options.

שליסל פֿעיִקייטן:

• 60 Watts of power output.
• 1 x 8-inch Dual Cone speaker for clear, full-range sound.
• On-board Digital FX (Reverb, Chorus).
• Integrated FX loop for external effects pedals.
• Two independent channels with dedicated EQ.
• Battery-powered operation with up to 24 hours of use.
• Auxiliary input for connecting external audio devices.

Image: Front side view of the Laney A-Fresco-2 Acoustic Instrument Combo ampלײַכטער, ווײַזןasinג זײַן קאָמפּאַקטן דיזײַן און קאָנטראָל פּאַנעל.

קאָנטראָלס און קאַנעקשאַנז

Familiarize yourself with the various controls and connection points on your A-Fresco-2 ampליפער.

Control Panel (Front/Side)

Image: Close-up of the Laney A-Fresco-2 control panel, showing knobs and input jacks.

• באַנד: Master volume control for the entire ampליבער רעזולטאַט.
• שטום: Button to temporarily silence the ampליבער רעזולטאַט.
• מאַכט ינדיקאַטאָר: LED light indicating the power status of the unit.
• אַנטי-פידבעק: Control to reduce or eliminate feedback.
• פאַסע: Button to invert the phase of the input signal, useful for feedback reduction or tonal shaping.
• ריווערב: Effect control for adding reverberation to your sound. Each channel has an independent adjustment.
• כאר: Effect control for adding chorus to your sound. Each channel has an independent adjustment.
• טרעבאַל: EQ control for adjusting high frequencies. Independent for each channel.
• מיטל: EQ control for adjusting mid frequencies. Independent for each channel.
• באַס: EQ control for adjusting low frequencies. Independent for each channel.
• פאָרעם: Tone shaping button or knob, offering a pre-set EQ curve. Independent for each channel.
• מדרגה: Input gain control for each channel (CH1, CH2).
• שפּיץ ינדיקאַטאָר: LED light that illuminates when the input signal is too high, indicating potential clipping.
• CH1 אריינגאנג: Combination XLR/TRS jack for connecting instruments or microphones.
• CH2 אריינגאנג: Combination XLR/TRS jack for connecting instruments or microphones.

דערציען פּאַנעל קאַנעקשאַנז

Image: Rear panel of the Laney A-Fresco-2, showing various input/output jacks and power switch.

• כעדפאָונז: 3.5 מ״מ סטערעאָ דזשעק פֿאַר פֿאַרבינדן כעדפאָונז.
• אָוקס אין: 3.5mm stereo jack for connecting external audio sources like MP3 players or phones.
• FX שיקן: Output for sending signal to external effects units.
• FX צוריקקער: Input for receiving signal from external effects units.
• ווייַט: Jack for connecting an optional footswitch (FS2-MINI) for remote control of functions.
• DI Out (XLR): Balanced XLR output for connecting to a PA system or recording console.
• GND ליפט: Switch to help eliminate hum caused by ground loops when using the DI Out.
• מקור: Switch to select the source for the DI Out (Pre-EQ/Post-EQ).
• מאָדע: Switch to select power mode (Normal/Eco).
• DC אין: Power input jack for the supplied AC adapter.
• מאַכט סוויטש: אן/אויס קנעפל פאר די ampליפער.
• באַטערי אָפּטייל: Access for the internal rechargeable Li-Ion battery.

סעטאַפּ

מאַכט אויף

1. מאַכט מאַכט: Connect the supplied AC adapter to the 'DC In' jack on the rear panel and plug it into a suitable wall outlet.
2. באַטאַרייע מאַכט: The A-Fresco-2 has an internal rechargeable Li-Ion battery. Ensure it is charged before use. The unit can be used while charging.
3. Flip the 'Power' switch on the rear panel to the 'ON' position. The power indicator LED on the control panel will illuminate.

Connecting Your Instrument/Microphone

1. פאַרזיכערן די amplifier's 'Volume' control is set to minimum.
2. Connect your acoustic instrument or microphone to either the 'CH1 Input' or 'CH2 Input' using a standard 1/4-inch jack cable or an XLR cable.
3. If using an external audio source (e.g., MP3 player), connect it to the 'Aux In' jack using a 3.5mm stereo cable.

Using the FX Loop

To integrate external effects pedals:

1. Connect the 'FX Send' jack to the input of your external effects unit.
2. Connect the output of your external effects unit to the 'FX Return' jack.

אַפּערייטינג

יקערדיק אָפּעראַציע

1. After connecting your instrument, slowly increase the 'Level' control for the active channel until you reach a desired input level. The 'Peak' LED should only flash occasionally.
2. Gradually raise the 'Volume' control to achieve your overall desired output level.

Tone Shaping (EQ)

Use the 'Treble', 'Middle', and 'Bass' controls for each channel to adjust the tonal characteristics of your instrument. Experiment with these controls to find the sound that best suits your instrument and playing style. The 'Shape' button/knob provides a quick pre-set EQ curve.

עפפעקץ

• ריווערב: Turn the 'Reverb' knob to add a sense of space and depth to your sound.
• כאר: Turn the 'Chorus' knob to add a shimmering, swirling effect to your sound.

Anti-Feedback and Phase

If you experience feedback, try adjusting the 'Anti-Feedback' control. The 'Phase' button can also help eliminate feedback, especially in live situations, by inverting the signal's phase.

עקאָ מאָדע

The 'Mode' switch on the rear panel allows you to select between 'Normal' and 'Eco' modes. 'Eco' mode conserves battery power, extending the operational time when running on batteries.

וישאַלט

רייניקונג

צו ריין די amplifier, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish. Ensure the unit is powered off and unplugged before cleaning.

באַטערי קער

The internal Li-Ion battery is designed for long life. To maximize battery lifespan:

• פֿאַרמײַדט אָפֿט פֿולשטענדיק אויסצולאָדן די באַטעריע.
• האַלט די אַפּאַראַט אין אַ קיל, טרוקן אָרט ווען נישט אין באַנוץ פֿאַר לענגערע פּיריאַדז.
• If storing for a long time, ensure the battery is charged to approximately 50-70% capacity.
• Do not attempt to replace the battery yourself. Contact qualified service personnel if battery issues arise.

טראָובלעשאָאָטינג

• קיין קול:
  • קוק אויב די amplifier is powered on and the power indicator LED is lit.
  • מאַכן זיכער אַז אַלע קייבאַלז זענען סיקיורלי פארבונדן.
  • Verify that the 'Volume' and channel 'Level' controls are not set to minimum.
  • Check if the 'Mute' button is engaged.
  • Test with a different instrument or cable to rule out external equipment issues.
• פאַרקרימט סאָונד:
  • Reduce the channel 'Level' control if the 'Peak' LED is constantly lit.
  • Lower the overall 'Volume' control.
  • קוק נאָך צעבראָכענע קאַבלען.
• זשומען אדער גערויש:
  • Engage the 'GND Lift' switch on the rear panel if using the DI Out.
  • Ensure all power connections are secure and not near other electrical interference sources.
  • A slight amount of white noise may be present at higher volumes, which is common for some amplifiers and typically unnoticeable during playing.
• באַטאַרייע ניט טשאַרדזשינג:
  • Ensure the AC adapter is correctly connected and the wall outlet is functional.
  • Verify that the power adapter is the original supplied unit.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Laney Ampליפיקאַטיאָן webזייטל. האַלט דיין קויפן באַווייַז פֿאַר וואָראַנטי קליימז.