Evotech Performance Frame Slider Installation Manual

1. הקדמה

This manual provides detailed instructions for the proper installation and maintenance of your Evotech Performance Frame Sliders for the KTM 790 Duke (2018+). These frame sliders are designed to offer protection to your motorcycle's frame and engine components in the event of a fall or slide. Please read all instructions carefully before beginning installation.

2. זיכערקייַט אינפֿאָרמאַציע

WARNING: Installation of motorcycle parts requires specialized knowledge and tools. Improper installation can lead to serious injury or damage to your motorcycle. It is strongly recommended that installation be performed by a qualified, certified mechanic or an authorized service center.

• טראָגט שטענדיק פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE) בעת דער אינסטאַלאַציע.
• Ensure the motorcycle is stable and securely supported on a stand before beginning work.
• Allow the engine and exhaust to cool completely before handling any components.
• Refer to your motorcycle's service manual for specific torque values and procedures where applicable.
• Keep all fasteners clean and free of debris.

3. פּעקל אינהאַלט

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your Evotech Performance dealer immediately.

• Left Frame Slider Assembly
• Right Frame Slider Assembly
• Mounting Bolts and Washers (various sizes)
• ייַנמאָנטירונג אינסטרוקציעס (דעם דאָקומענט)

Image 1: Typical Evotech Performance Frame Slider Kit components. Actual contents may vary slightly.

4. ינסטאַלירונג אינסטרוקציעס

4.1. Tools Required (Not Supplied)

• טאָרק רענטש
• Socket Set (appropriate sizes for motorcycle and slider bolts)
• Hex Key Set (Allen wrenches)
• Thread-locking compound (medium strength, e.g., Loctite 243)
• ריין בעבעכעס

4.2. פאַר-ינסטאַלירונג סטעפּס

1. Park the motorcycle on a level, stable surface.
2. Secure the motorcycle on a suitable stand (e.g., paddock stand) to prevent it from tipping.
3. Ensure the engine and exhaust system are cool to the touch.
4. Identify the mounting points on the motorcycle frame. These are typically existing engine mount bolts.

4.3. Frame Slider Installation (General Steps)

The following steps are general guidelines. Always refer to the specific instructions provided with your kit for exact bolt locations and torque specifications.

1. Remove Existing Bolts: Carefully remove the designated engine mount bolt(s) on one side of the motorcycle. Work on one side at a time to maintain engine stability.
2. Prepare Slider Assembly: Apply a small amount of medium-strength thread-locking compound to the threads of the new, longer mounting bolt supplied with the frame slider kit.
3. Mount Frame Slider: Insert the new bolt through the frame slider and any spacers or brackets as instructed. Carefully thread the bolt into the engine mount point.
4. צוציען באָלט: Hand-tighten the bolt until snug. Then, using a torque wrench, tighten the bolt to the manufacturer's specified torque setting. דו זאלסט נישט אָוווערטייטאַן.
5. איבערחזרן פֿאַר דער אַנדערער זײַט: Once the first side is securely installed, repeat the process for the opposite side of the motorcycle.
6. לעצט טשעק: After both frame sliders are installed, double-check all bolts for proper tightness and ensure the sliders are securely mounted and do not interfere with any other motorcycle components (e.g., fairings, handlebars, suspension travel).

5. וישאַלט

Regular inspection and maintenance will ensure the longevity and effectiveness of your frame sliders.

• פּעריאָדיש דורכקוק: Regularly check the frame sliders for any signs of damage, cracks, or wear.
• באָלט טייטנאַס: Periodically check that all mounting bolts are securely tightened to the specified torque. Vibrations from riding can sometimes loosen fasteners.
• רייניקונג: Clean the frame sliders with a mild soap and water solution. Avoid harsh chemicals that may damage the material.
• Post-Incident Check: If your motorcycle experiences a fall or slide, even a minor one, thoroughly inspect the frame sliders and their mounting points for any damage. Replace damaged components immediately.

6. ספּעסאַפאַקיישאַנז

7. וואָראַנטי און שטיצן

Evotech Performance products are designed and manufactured in the UK to high standards. For warranty information, technical support, or to purchase replacement parts, please contact your authorized Evotech Performance dealer or visit the official Evotech Performance webזייטל. האַלט דיין קויפן באַווייַז פֿאַר וואָראַנטי קליימז.