ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit D210

הקדמה

Welcome to the instruction manual for your ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit. This kit provides an engaging and educational experience, allowing you to construct a detailed, walking mechanical T-Rex model from precision-cut wooden pieces. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Image: The fully assembled ROBOTIME ROKR T-Rex mechanical wooden model.

זיכערקייַט אינפֿאָרמאַציע

ביטע אָבסערווירן די פאלגענדע זיכערקייַט פּריקאָשאַנז:

• דאס פּראָדוקט כּולל קליינע טיילן און איז נישט פּאַסיק פֿאַר קינדער אונטער 3 יאָר צוליב דערשטיקונגס-געפֿאַרן.
• דערוואַקסענע השגחה איז רעקאָמענדירט בעת אַסעמבאַלינג, ספּעציעל פֿאַר ייִנגערע בויערס.
• באַהאַנדלט האָלץ שטיקלעך פֿאָרזיכטיק צו פֿאַרמייַדן שפּלינטערס.
• Keep away from open flames or excessive heat.
• Do not force pieces together; if a piece does not fit, re-check the instructions.

פּעקל אינהאַלט

Before starting assembly, please verify that all components are present:

• Pre-cut wooden sheets with model parts.
• אינסטרוקציע מאַנואַל.
• Small accessories (e.g., gears, shafts, springs, sandpaper, wax, screwdriver if applicable).

Image: The retail packaging for the ROBOTIME ROKR T-Rex D210 model kit.

אַסעמבלי אינסטרוקציעס

Follow these steps carefully to assemble your T-Rex model. Refer to the diagrams in your physical instruction booklet for detailed visual guidance.

1. צוגרייטונג: Carefully remove all wooden pieces from their sheets. Use the included sandpaper to smooth any rough edges if necessary. Identify all parts according to the numbering in the instruction booklet.
2. באַזע אַסעמבלי: Begin by assembling the base structure of the T-Rex, typically starting with the main body frame. Ensure all interlocking tabs fit snugly.
3. Legs and Tail: Attach the leg mechanisms and tail sections. Pay close attention to the orientation of gears and connecting rods for proper walking motion. Lubricate moving parts with the provided wax as instructed.
4. Head and Jaws: Assemble the head, including the jaw mechanism. Ensure the roaring function (if applicable) is correctly integrated.
5. Motor and Wiring (if applicable): If your model includes an electric motor, carefully follow the wiring diagrams to connect it to the battery compartment and internal mechanisms. Ensure correct polarity.
6. לעצט פֿאַרזאַמלונג: Connect all major sections. Test the movement of joints and gears as you proceed to ensure smooth operation.
7. טעסט: Once fully assembled, test the walking and roaring functions. If the model does not move smoothly, re-check the connections and ensure all parts are properly aligned and lubricated.

באַמערקונג: The complexity level for this model is indicated as Level: ★★★☆☆ and it contains 85 ברעקלעך, suggesting a moderate challenge suitable for ages 12+.

אַפּערייטינג ינסטראַקשאַנז

Once assembled, your ROBOTIME ROKR T-Rex is ready for action:

• מאַכט מקור: Insert the required batteries (not included) into the designated battery compartment, observing correct polarity.
• אַקטאַוויישאַן: Locate the power switch, usually on the base or side of the model. Flip the switch to the "ON" position.
• Walking Function: The T-Rex should begin to walk forward. If movement is erratic, ensure it is on a flat, smooth surface.
• Roaring Function: The model is designed to roar. This function is typically synchronized with its movement or activated by a specific sensor (e.g., clapping, as suggested by the box art). Clap your hands near the model to activate the roaring sound.
• דיאַקטיוויישאַן: To turn off the model, flip the power switch to the "OFF" position. Remove batteries if storing for extended periods.

וישאַלט

To ensure the longevity and smooth operation of your wooden model:

• רייניקונג: Dust the model regularly with a soft, dry cloth. Do not use water or chemical cleaners, as they may damage the wood.
• שמירן: Periodically apply a small amount of the provided wax (or a suitable alternative like paraffin wax) to moving wooden gears and joints to maintain smooth operation.
• סטאָרידזש: Store the model in a dry place away from direct sunlight and extreme temperature fluctuations to prevent warping or damage to the wood.
• באַטערי זאָרגן: Remove batteries if the model will not be used for an extended period to prevent leakage.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

For any questions regarding assembly, missing parts, or operational issues, please contact ROBOTIME customer support. While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects.

Please visit the official ROBOTIME website or refer to the contact information provided on the product packaging for assistance.

באַמערקונג: האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר קיין וואָראַנטי קליימז.