ARES 70922
ARES 70922 פּאָרטאַטיוו טיילן וואַשער ינסטרוקציע מאַנואַל
1. הקדמה
This manual provides instructions for the safe and effective use of the ARES 70922 Portable Parts Washer. This device is designed for degreasing small parts and tools using a standard 5-gallon bucket (not included).

בילד 1.1: איבערview of the ARES 70922 Portable Parts Washer components.
2. זיכערקייַט אינפֿאָרמאַציע
ווארענונג: לייענט אלע זיכערהייט אינסטרוקציעס איידער איר ניצט דעם פראדוקט.
- Use only with non-corrosive, non-solvent, water-based cleaning solutions. Using flammable or corrosive solvents can cause fire, explosion, or damage to the unit.
- זיכער מאַכן אַז די עלעקטרישע שנור און פּלאָג זענען אין גוטן צושטאַנד איידער יעדן באַנוץ. ניצט נישט מיט אַ צעבראָכענעם שנור אָדער פּלאָג.
- האַלט הענט און פרייַ קליידער אַוועק פון באַוועגלעכע טיילן בעת אָפּעראַציע.
- Always unplug the unit from the power source before performing any maintenance, cleaning, or when not in use.
- Do not submerge the entire unit (excluding the pump) in liquid. The pump is designed for submersion, but other electrical components are not.
- Operate the parts washer in a well-ventilated area.
- האַלטן אויס פון דערגרייכן פון קינדער.
3. פּעקל אינהאַלט
באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:
- 1x Parts Washer Basin
- 1x Submersible Pump with Power Cord
- 1x Hard Bristle Cleaning Brush with Hose
A standard 5-gallon bucket is required for operation and is not included.
4. סעטאַפּ אינסטרוקציעס
- Prepare the Bucket: Obtain a clean, standard 5-gallon bucket.
- שטעלט די פּאָמפּע: Place the submersible pump at the bottom of the 5-gallon bucket. The pump is equipped with suction cups to help secure it to the bucket's base.
- פאַרבינדן די קישקע: Attach the hose from the cleaning brush to the outlet of the submersible pump. Ensure the connection is secure.
- שטעל דעם ב.asin: Position the parts washer basin on top of the 5-gallon bucket. The basin is designed to fit securely over the bucket's rim.
- לייג צו רייניקונג לייזונג: Pour your chosen non-corrosive, non-solvent, water-based cleaning solution into the basin. Ensure the liquid level is sufficient to cover the pump when it is placed in the bucket, but do not overfill the basin.

Image 4.1: Setup diagram illustrating the parts washer assembly on a 5-gallon bucket.
5. אָפּעראַציע
- מאַכט אויף: Plug the pump's power cord into a suitable electrical outlet. The pump will begin to circulate the cleaning solution through the brush.
- Clean Parts: Place the parts to be cleaned into the basin. Use the hard bristle brush, which delivers a continuous flow of cleaning solution, to scrub and degrease the parts.
- דריינאַדזש: די בasin features a channel drainage system designed to catch waste material and return the cleaning solution to the bucket, allowing larger debris to settle at the bottom of the basin.
- מאַכט אַוועק: Once cleaning is complete, unplug the pump from the electrical outlet.

Image 5.1: Demonstrating the use of the parts washer to clean a component.

Image 5.2: Metal parts placed in the parts washer basin פֿאַר רייניקונג.
6. וישאַלט
Regular maintenance ensures the longevity and optimal performance of your parts washer.
- רייניקונג פון די בasin: After each use, or as needed, remove the basin from the bucket and clean any accumulated debris. Rinse thoroughly with water.
- Cleaning Solution Replacement: Replace the cleaning solution regularly, especially when it becomes heavily soiled or its effectiveness diminishes. Dispose of used cleaning solution according to local environmental regulations.
- פּאָמפּע דורכקוק: Periodically inspect the submersible pump for any blockages or debris that may affect its operation. Unplug the pump before inspection.
- רייניקונג באַרשט: Clean the bristles of the brush after use to prevent buildup and maintain cleaning effectiveness.
- סטאָרידזש: When not in use, clean and dry all components. Store the parts washer in a clean, dry place.
7. טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Pump does not turn on or circulate liquid. | No power; Pump clogged; Insufficient liquid. | Check power connection. Ensure pump is fully submerged. Unplug and inspect pump for debris. |
| Reduced flow from brush. | Hose kinked; Pump partially clogged; Low liquid level. | Check hose for kinks. Unplug and inspect pump for debris. Add more cleaning solution. |
| Parts not cleaning effectively. | Cleaning solution is old/dirty; Incorrect cleaning solution type. | Replace cleaning solution. Ensure a suitable water-based, non-corrosive solution is used. |
8. ספּעסאַפאַקיישאַנז
- מאָדעל: ARES 70922
- דימענשאַנז (L x W x H): 13.75 X 13.75 X 5.12 אינטשעס
- וואָג: 3.85 פונט
- פּאָמפּע לויפן קורס: 1 גאלאן פּער מינוט (GPM)
- Bucket Compatibility: Standard 5-Gallon Buckets (not included)
- רעקאַמענדיד רייניקונג לייזונג: Non-corrosive, non-solvent, water-based solutions
- UPC: 818765028326

Image 8.1: Submersible pump and cleaning brush assembly.

Image 8.2: Detail of the hard bristle cleaning brush.
9. וואָראַנטי און שטיצן
ARES products are backed by a Performance Assurance. If you encounter any issues with your ARES Portable Parts Washer, please contact customer service for assistance with troubleshooting, parts, replacement, or refund.
For customer support, please refer to the contact information provided with your purchase or visit the official ARES webפּלאַץ.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.