Olide Swing Door Automatic Opening System Olide-120B Instruction Manual

1. זיכערקייַט אינפֿאָרמאַציע

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, injury, or improper operation of the device. Keep this manual for future reference.

• Ensure all electrical connections are performed by a qualified electrician and comply with local electrical codes.
• אָפּשטעקן די מאַכט איידער איר דורכפירן קיין וישאַלט אָדער אַדזשאַסטמאַנץ.
• Do not allow children to play with the automatic door system or its controls.
• Regularly inspect the system for any signs of wear, damage, or loose components.
• This device is designed for swing doors. Do not attempt to use it on other door types.

2. פּראָדוקט איבערview

The Olide Swing Door Automatic Opening System, model Olide-120B, is designed to provide convenient and accessible automatic operation for swing doors. It is suitable for various applications, including residential and commercial settings, assisting individuals with mobility challenges.

שליסל קאַמפּאָונאַנץ:

• Automatic Door Opener Unit (Motor and Controller)
• Swing Arm (Pull or Push type)
• רימאָוט קאָנטראָלס
• Hand Induction Switches
• מאַכט קאַבלע
• Adjustment Tool (Hex keys)

3. סעטאַפּ און ייַנמאָנטירונג

The Olide-120B system is designed for screw mounting. Proper installation is crucial for safe and reliable operation. It is recommended that installation be performed by a professional.

3.1 פאַר-ינסטאַלירונג טשעקס

• Ensure the door width does not exceed 1200mm.
• Verify the door weight is within the maximum limit of 120kg.
• Confirm a stable power supply of 110V/AC, 50/60Hz is available at the installation site.
• Determine the door's swing direction (inward or outward) to select the appropriate arm configuration (pull arm or push arm).

3.2 מאָנטירן די הויפּט איינהייט

Mount the main opener unit securely above the door frame using appropriate screws and anchors. Ensure it is level and aligned with the door.

3.3 Arm Installation

Attach the swing arm to the main unit and the door. The type of arm (pull or push) depends on whether the door opens inward or outward.

3.4 עלעקטריקאַל קאַנעקשאַנז

Connect the power supply and control devices (remote receiver, hand induction switches) to the controller unit as per the wiring diagram provided in the detailed installation guide (not included in this manual). Ensure all connections are secure and insulated.

3.5 ערשטע אַדזשאַסטמאַנץ

After installation, use the handheld programmer to set initial parameters:

• Opening/Closing Speed: Adjust the door's movement speed.
• Manual Push Function: Enable or disable the ability to manually push the door open.
• עפענונג ריכטונג: Configure for single-direction or bi-directional opening.
• Hold-Open Time: Set how long the door remains open after activation.

4. אַפּערייטינג ינסטרוקטיאָנס

The Olide-120B system can be operated using remote controls or hand induction switches.

4.1 Using Remote Controls

Press the designated button on the remote control to activate the door. The door will open, remain open for the set hold-open time, and then close automatically.

4.2 Using Hand Induction Switches

Wave your hand over the sensor area of the hand induction switch to activate the door. The door will open and close according to the programmed settings.

4.3 אַדזשאַסטינג פּאַראַמעטערס

The handheld programmer (refer to Figure 3.2) allows for fine-tuning of operational parameters such as opening/closing speed (250-450mm/s), opening direction (both-way or one-way), and hold-open time. Consult the detailed programming guide for specific instructions on using the programmer.

5. וישאַלט

Regular maintenance ensures the longevity and safe operation of your Olide-120B system.

• כוידעשלעך דורכקוק: Check all mounting screws and connections for tightness. Ensure the swing arm moves freely without obstruction.
• רייניקונג: Keep the main unit and sensors clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• שמירן: Periodically check the moving parts of the swing arm for smooth operation. Apply a small amount of silicone-based lubricant if necessary, avoiding electrical components.
• סענסאָר טשעק: Test the hand induction switches and any other sensors regularly to ensure they respond correctly.

6. טראָובלעשאָאָטינג

If you encounter issues with your Olide-120B system, refer to the following common problems and solutions:

• Door not opening/closing: Check power supply, ensure all cables are securely connected, and verify remote control batteries.
• Door moves erratically: Inspect the swing arm for obstructions or damage. Check parameter settings with the handheld programmer.
• Sensors not responding: Clean the sensor surface. Ensure there are no objects blocking the sensor's field.
• ומגעוויינטלעך נויזיז: Inspect moving parts for wear or misalignment. Lubricate if necessary. If the noise persists, contact support.

For complex issues not covered here, please contact Olide customer support.

7. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the Olide Swing Door Automatic Opening System Olide-120B:

8. וואָראַנטי און שטיצן

8.1 וואָראַנטי אינפֿאָרמאַציע

The Olide Swing Door Automatic Opening System Olide-120B comes with a 5 יאָר וואָראַנטי פֿון דעם קויפֿדאַטום. די וואָראַנטי דעקט חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַלן באַנוץ. ביטע באַהאַלטן אייער קויפֿבאַווייַז פֿאַר וואָראַנטי קלאַגעס.

8.2 קונה שטיצן

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Olide customer support through your retailer or the official Olide website. Provide your model number (Olide-120B) and a detailed description of the issue when contacting support.