HOLOSUN HE403B-GR / HS403B 2 MOA גרין דאט מיקראָ זיכט אינסטרוקציע מאַנואַל

1. הקדמה

This manual provides instructions for the proper setup, operation, and maintenance of your HOLOSUN HE403B-GR / HS403B 2 MOA Green Dot Micro Sight. Please read this manual thoroughly before using the device to ensure safe and effective operation.

בילד 1.1: פראָנט view of the HOLOSUN HE403B-GR Micro Sight.

2. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין פּעקל:

• HOLOSUN HE403B-GR / HS403B Micro Sight
• Lower 1/3 Co-witness Mount (1.63")
• Low Mount (0.75")
• CR2032 באַטאַרייע
• T10 L שליסל
• אָביעקטיוו שטאָף
• Rubber Lens Cover

3. סעטאַפּ

3.1. באַטאַרייע ייַנמאָנטירונג

1. Unscrew the battery tray cover located on the side of the sight using the provided T10 L key.
2. אַרײַנשטעלן די CR2032 באַטעריע מיט דער positive (+) זײַט אַרויף.
3. Securely replace the battery tray cover.

3.2. אויפשטעלן דעם וויזיר

The sight includes two mounts: a lower 1/3 co-witness mount (1.63") and a low mount (0.75"). Choose the appropriate mount for your rifle or carbine application.

1. Attach the desired mount to the bottom of the sight using the provided screws.
2. Place the sight assembly onto your firearm's Picatinny or Weaver rail.
3. Tighten the mount's cross bolt or quick-release lever to secure the sight firmly to the rail. Ensure it is stable and does not wobble.

בילד 3.1: ווינקלדיק view of the HOLOSUN HE403B-GR Micro Sight, demonstrating its compact size.

4. אַפּערייטינג ינסטרוקטיאָנס

4.1. אײַנשטעלן/אויסשטעלן און ליכטיקייט אדזשאַסטמענט

• מאַכט אויף: דריק אדער דעם '+' אדער '-' קנעפל צו אנצינדן דעם זיכט.
• ברייטנאַס אַדזשאַסטמאַנט: Use the '+' button to increase brightness and the '-' button to decrease brightness. There are 12 brightness settings: 10 for daylight and 2 for night vision compatibility.
• מאַכט אַוועק: Press and hold the '+' button for 3 seconds to turn off the sight.

4.2. Shake Awake Technology

The sight features Shake Awake technology to conserve battery life. When the optic detects no motion for a set period (default is 10 minutes), the LED will automatically deactivate. The slightest movement of the optic will instantly reactivate the LED to its last used brightness setting.

Image 4.1: Explanation of Shake Awake Technology.

4.3. ווינדאַדזש און הייך אַדזשאַסטמאַנט

The windage and elevation adjustments are located on the top and right side of the sight, respectively. Each click adjusts the point of impact by 0.5 MOA.

1. Remove the protective caps from the adjustment turrets.
2. Use a flathead screwdriver or the cap itself to turn the adjustment turrets.
3. קער די הייך turret (top) clockwise to move the point of impact down, and counter-clockwise to move it up.
4. קער די ווינדאַגע turret (right side) clockwise to move the point of impact right, and counter-clockwise to move it left.
5. After zeroing, replace the protective caps.

בילד 4.2: זייט view of the sight, showing the windage adjustment turret.

4.4. Reticle Information

The HE403B-GR features a 2 MOA Green Dot reticle. The HS403B features a 2 MOA Red Dot reticle. Both models offer a clear, precise aiming point.

Image 4.3: Visual representation of the 2 MOA Green Dot and Red Dot reticles.

5. וישאַלט

5.1. רייניקונג

To maintain optical clarity, regularly clean the lenses with the provided lens cloth. For stubborn smudges, a small amount of lens cleaning solution designed for optics can be used. Avoid using harsh chemicals or abrasive materials.

5.2. באַטערי פאַרבייַט

Replace the CR2032 battery when the reticle dims significantly or fails to illuminate. Refer to Section 3.1 for battery installation steps.

5.3. סטאָרידזש

When not in use, store the sight with the rubber lens cover installed to protect the lenses from dust and scratches. Store in a cool, dry place.

6. טראָובלעשאָאָטינג

If you encounter issues with your HOLOSUN Micro Sight, refer to the following common problems and solutions:

• רעטיקל נישט קענטיק:
  • Check if the sight is powered on.
  • זיכער מאַכן אַז די באַטאַרייע איז ריכטיק אינסטאַלירט און האט גענוג אָפּצאָל. פאַרבייטן אויב נייטיק.
  • Adjust brightness settings using the '+' button.
• Reticle Appears Dim or Flickers:
  • פאַרבייַטן די CR2032 באַטאַרייע.
  • פאַרזיכערן די באַטאַרייע קאָנטאַקטן זענען ריין און פריי פון קעראָוזשאַן.
• Zero Not Holding:
  • Verify that the sight is securely mounted to the firearm rail. Check all screws and mounting hardware.
  • Ensure the adjustment turrets are not loose or accidentally moved.

If problems persist after attempting these solutions, please contact HOLOSUN customer support.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי & שטיצן

8.1. וואָראַנטי אינפֿאָרמאַציע

The HOLOSUN HE403B-GR / HS403B Micro Sight is covered by a לעבן וואָראַנטי. For specific details regarding warranty coverage and terms, please refer to the official HOLOSUN webפּלאַץ אָדער קאָנטאַקט קונה שטיצן.

8.2. קונה שטיצן

For technical assistance, warranty claims, or any other inquiries, please visit the official HOLOSUN webזייטל אדער קאנטאקט זייער קאסטומער סערוויס דעפארטמענט. קאנטאקט אינפארמאציע קען געווענליך געפונען ווערן אויף די פאבריקאנט'ס webפּלאַץ.