BONTEC GDM02U Dual Monitor Arm User Manual

1. הקדמה

Thank you for choosing the BONTEC GDM02U Dual Monitor Arm. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read these instructions carefully before assembly and retain them for future reference.

This dual monitor arm is designed to support two 13-32 inch LED LCD screens, each weighing up to 8 kg (17.6 lbs), with VESA mounting patterns of 75x75mm or 100x100mm.

Image 1.1: BONTEC Dual Monitor Arm supporting two monitors. This image highlights the product's compatibility with 13-32 inch screens, an 8kg (18.0 lbs) weight capacity per arm, and VESA 75x75 / 100x100 mounting standards.

2. זיכערקייַט אינפֿאָרמאַציע

• לייענען אַלע ינסטראַקשאַנז: Ensure you understand all instructions and warnings before installation.
• וואָג קאַפּאַציטעט: Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) per arm. Exceeding this limit may result in serious injury or product damage.
• מאָניטאָר גרייס: This arm is designed for monitors between 13 and 32 inches.
• VESA קאַמפּאַטאַבילאַטי: Ensure your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
• Desk stability: Ensure your desk is structurally sound and can support the combined weight of the monitor arm and monitors.
• פֿאַרזאַמלונג: Assemble the product according to the instructions. Improper assembly can cause damage or serious injury.
• מאָווינג טיילן: Be aware of pinch points when adjusting the arm.
• קינדער: האַלטן קליין טיילן אַוועק פון קינדער.

3. פּעקל אינהאַלט

Verify that all components are present and undamaged. If any parts are missing or damaged, contact BONTEC customer service.

Image 3.1: All components included in the BONTEC GDM02U package. This includes the dual gas spring arms, desk clamp, grommet mounting hardware, VESA plates, and assembly tools.

Note: The exact number and type of fasteners may vary slightly. Refer to the included parts list in your package.

4. סעטאַפּ און ייַנמאָנטירונג

The BONTEC GDM02U offers two installation methods: Desk Clamp and Grommet Base.

4.1 Choose Your Installation Method

Image 4.1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The desk clamp is suitable for desk thicknesses between 10mm and 83mm. The grommet base requires a hole diameter of 10mm to 50mm and is also suitable for desk thicknesses between 10mm and 83mm.

4.2 שרייַבטיש קלamp ייַנמאָנטירונג

1. צוטשעפּען די C-clamp to the main pole.
2. שטעלן די קלamp on the edge of your desk and tighten the screw until secure. Ensure the desk thickness is between 10mm and 83mm.
3. Slide the monitor arms onto the pole and secure them at the desired height.

4.3 Grommet Base Installation

1. אויב אייער טיש האט אַ גראַמעט לאָך (10-50 מם דיאַמעטער), שטעקט אַרײַן די גראַמעט באַזע דורך דעם לאָך.
2. Secure the base from underneath the desk using the provided plate and nut. Ensure the desk thickness is between 10mm and 83mm.
3. Slide the monitor arms onto the pole and secure them at the desired height.

4.4 Attaching Monitors

1. Attach the VESA plates to the back of your monitors using the appropriate screws (M4 or M5, depending on your monitor). Ensure the VESA pattern is 75x75mm or 100x100mm.
2. Carefully slide the monitors (with VESA plates attached) onto the arms' mounting heads. The VESA plates have open top slots for easy hanging.
3. Secure the monitors by tightening the bottom screws on the VESA plates.

Image 4.2: Detail of VESA plate attachment and cable management. Monitors are easily mounted by sliding them onto the VESA plate's top slots. The integrated cable management system helps organize power and display cables for a tidy workspace.

4.5 קאַבלע מאַנאַגעמענט

Route your monitor cables through the integrated cable management channels on the underside of the arms. This helps maintain a clean and organized workspace.

5. אָפּעראַציע און אַדזשאַסטמענט

The BONTEC GDM02U monitor arm offers extensive flexibility for optimal viewינג אַנגלעס און ערגאַנאַמיק פּאַזישאַנינג.

5.1 אַדזשאַסטירן מאָניטאָר פּאָזיציע

• הייך אַדזשאַסטמאַנט: The gas spring allows for smooth vertical movement. Gently push or pull the monitor to the desired height (up to 400mm).
• טילט: Tilt the monitor +90° (upwards) to -45° (downwards) to reduce glare and optimize viewing.
• סוויוול: Swivel the monitor ±90° left or right. The arm itself can swivel 360° at the base and 250° at the elbow joint.
• ראָוטיישאַן: Rotate the monitor 360° for landscape or portrait orientation.

Image 5.1: Demonstrates the extensive flexibility of the monitor arm. It features 360° swivel at the base, 250° swivel at the arm's elbow, and ±90° swivel along with 360° rotation at the monitor mounting plate, allowing for wide viewing angles and orientation changes.

Image 5.2: Illustrates the full dynamic motion of the arm, including a tilt range of +90° to -45°. It shows a maximum arm extension of 525mm and a maximum height adjustment of 400mm. A close-up highlights the tension adjustment screw for the gas spring arm.

5.2 גאז פֿעדער שפּאַנונג אַדזשאַסטמענט

If your monitor does not stay at the desired height, or if it is too difficult to move, you may need to adjust the gas spring tension. Use the provided Allen key to turn the tension screw located on the arm joint:

• קער clockwise (-) צו פאַרמינערן tension (for lighter monitors).
• קער counter-clockwise (+) צו פאַרגרעסערן tension (for heavier monitors).

Adjust gradually until the monitor holds its position firmly and moves smoothly.

6. וישאַלט

• רייניקונג: ווישט דעם מאָניטאָר אָרעם מיט אַ ווייכן, דamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער אָדער סאָלווענטן.
• פּעריאָדיש טשעקס: Periodically check all screws and connections to ensure they are tight and secure. Re-tighten if necessary.
• גאז פרילינג: The gas spring is designed for long-term use and generally requires no maintenance. Do not attempt to disassemble the gas spring cylinder.

7. טראָובלעשאָאָטינג

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the documentation included with your product or visit the official BONTEC webזייטל. איר קענט אויך קאָנטאַקטירן אייער הענדלער פֿאַר הילף.

א דעטאלירטע באַניצער פירער אין פּדף פֿאָרמאַט איז בנימצא פֿאַר דאַונלאָודינג: BONTEC GDM02U User Guide (PDF).