מילעניום BS-500 הייך-אַדזשאַסטאַבאַל מאָניטאָר סטאַנדז סעט באַניצער מאַנואַל

1. הקדמה

This manual provides essential instructions for the safe and effective use of your Millenium BS-500 Height-Adjustable Monitor Stands Set. These stands are designed to position your nearfield monitors at an optimal height for improved audio monitoring. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

בילד 1.1: The Millenium BS-500 Height-Adjustable Monitor Stands Set. This image displays two monitor stands, each featuring a triangular base, a central pole, and a top plate designed to support a studio monitor. One stand is shown at a lower height, and the other at a higher height, illustrating the adjustable nature of the product.

2. זיכערקייַט אינסטרוקציעס

• Ensure all components are securely fastened before placing any equipment on the stands.
• Do not exceed the maximum load capacity of 45 kg per stand.
• Place stands on a stable, level surface to prevent tipping.
• Keep hands clear of moving parts during height adjustment.
• פֿאַרמײַדט צו שטעלן שטאַנדן אין געביטן מיט אַ סך פֿאַרקער, וואו זיי קענען אַקסאַדענטאַל איבערגעקערט ווערן.
• Regularly inspect the stands for any signs of wear or damage. Do not use if damaged.

3. פּעקל אינהאַלט

The Millenium BS-500 Height-Adjustable Monitor Stands Set includes the following components:

• 2x Monitor Stands (each stand consists of a base, main pole, and top plate)
• Necessary assembly hardware (screws, washers, etc. - specifics not provided, general statement)

4. סעטאַפּ און אַסעמבלי

Follow these steps to assemble your Millenium BS-500 monitor stands:

1. אָפּלייגן קאַמפּאָונאַנץ: Carefully remove all parts from the packaging and verify that all components listed in Section 3 are present.
2. צובינדן די באַזע צום שטאַנג: Securely attach the triangular base to the bottom of the main support pole using the provided screws and tools. Ensure the connection is tight and stable.
3. צוטשעפּען די שפּיץ פּלאַטע: Fasten the monitor support plate to the top of the main support pole. Ensure it is level and securely attached.
4. Repeat for Second Stand: Follow the same steps to assemble the second monitor stand.
5. ערשט אָרט: Position the assembled stands on a flat, stable surface where your monitors will be used.

Note: Specific screw types and tools are not detailed in product information. Use appropriate fasteners and ensure all connections are firm.

5. Operation: Height Adjustment

The Millenium BS-500 monitor stands offer height adjustment to optimize your listening position.

1. Remove Monitor: Before adjusting, carefully remove any monitor placed on the stand.
2. Unlock Adjustment Mechanism: Locate the height adjustment knob or pin on the main support pole. Loosen or disengage it to allow the pole to move freely.
3. סטרויערן די הייך: Carefully raise or lower the upper section of the stand to your desired height. The stands are adjustable from 93 cm to 115 cm.
4. Secure Adjustment: Once the desired height is reached, firmly tighten the adjustment knob or re-engage the pin to lock the stand in place. Ensure it is fully secured before proceeding.
5. Replace Monitor: Carefully place your monitor back onto the top plate, ensuring it is centered and stable.

Always ensure the stand is securely locked at the desired height before placing equipment on it.

6. וישאַלט

Proper maintenance ensures the longevity and safe operation of your monitor stands.

• רייניקונג: Wipe the stands with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners.
• דורכקוק: Periodically check all screws and connections for tightness. Re-tighten if necessary. Inspect the stand for any signs of rust, bending, or structural damage.
• סטאָרידזש: If storing the stands for an extended period, ensure they are clean and dry. Store in a cool, dry place.

7. טראָובלעשאָאָטינג

If you encounter issues with your monitor stands, refer to the following common problems and solutions:

• שטאַנד איז נישט סטאַביל:
  • זיכער מאַכן אַז דער שטאַנד איז געשטעלט אויף אַ גאָר גלאַטער און גלייכער ייבערפלאַך.
  • Verify that all assembly screws, especially those connecting the base to the pole, are fully tightened.
  • Check that the height adjustment mechanism is securely locked.
• שוועריקייט צו סטרויערן הייך:
  • Ensure the adjustment knob or pin is fully loosened or disengaged.
  • Check for any obstructions or debris within the telescoping pole sections.
  • Do not force the adjustment; if it remains stiff, contact customer support.
• Stand Appears Damaged:
  • אָפּשטעלן די נוצן מיד.
  • Do not attempt to repair structural damage yourself. Contact Millenium customer support for assistance.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries regarding your Millenium BS-500 Height-Adjustable Monitor Stands Set, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

פאַבריקאַנט: מיללעניום