1. הקדמה
This manual provides detailed instructions for the MEAN WELL LRS-35-24 35W 24V 1.5A Enclosed AC/DC Power Supply. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.
פיגורע 1.1: איבערview of LRS-35 series features and typical applications.
1.1 שליסל פֿעיִקייטן
- Universal AC input / Full range (85 ~ 264 VAC).
- Withstands 300 VAC surge input for 5 seconds.
- No load power consumption <0.2W.
- Compact size and 1U low profile.
- High operating temperature up to 70 °C.
- פּראַטעקשאַנז: קורץ קרייַז, אָווערלאָאַד, איבער וואָלtage.
- קאָאָלינג דורך פריי לופט קאַנוועקשאַן.
- Compliance with IEC/EN 60335-1 (PD3) and IEC/EN61558-1, -2-16 for household appliances.
- Operating altitude up to 5000 meters.
- Withstands 5G vibration test.
- High efficiency, long life, and high reliability.
- LED indicator for power on.
- 100% פול-מאַסע פאַרברענען פּרובירן.
2. זיכערקייַט אינסטרוקציעס
ווארענונג: Improper installation or use can lead to electric shock, fire, or other hazards. Always follow these safety guidelines.
- קוואַלאַפייד פּערסאַנעל: אינסטאַלאַציע און וישאַלט זאָל נאָר דורכגעפירט ווערן דורך קוואַליפֿיצירטע פּערסאָנעל.
- מאַכט דיסקאַנעקשאַן: Always disconnect the AC power before any installation, wiring, or maintenance work.
- געהעריק גראָונדינג: Ensure the power supply is properly grounded to prevent electric shock.
- ווענטילאַטיאָן: Do not obstruct the ventilation openings. Ensure adequate airflow for cooling.
- סוויווע: Do not operate in environments with excessive moisture, dust, or extreme temperatures outside the specified range.
- אָווערלאָאַד שוץ: Do not exceed the specified output current or power ratings to prevent damage and fire hazards.
- ינסאַליישאַן: Ensure all connections are properly insulated to prevent short circuits.
- Voltage אַדזשאַסטמאַנט: דער רעזולטאַט וואָלtage adjustment potentiometer should only be adjusted by qualified personnel using appropriate tools.
3. פּראָדוקט איבערview
The LRS-35-24 is a 35W single-output enclosed type power supply with a 30mm low profile design. It features a metallic mesh case for enhanced heat dissipation.
פיגורע 3.1: פראָנט view of the LRS-35-24 power supply.
פיגורע 3.2: שפּיץ view of the LRS-35-24 power supply showing input and output terminals.
3.1 טערמינאַל פּין אַסיינמאַנט
Refer to the diagram below for the correct terminal connections.
Figure 3.3: Mechanical specification and terminal pin assignment. Pin 1: AC/L, Pin 2: AC/N, Pin 3: FG (Frame Ground), Pin 4: DC Output -V, Pin 5: DC Output +V.
| שפּילקע נומ. | אַסיינמאַנט |
|---|---|
| 1 | AC/L (Live AC Input) |
| 2 | AC/N (Neutral AC Input) |
| 3 | FG (ראַם ערד) |
| 4 | DC OUTPUT -V (Negative DC Output) |
| 5 | DC OUTPUT +V (Positive DC Output) |
4. סעטאַפּ און ייַנמאָנטירונג
Follow these steps for proper installation of the power supply.
- מאָונטינג: Mount the power supply in a well-ventilated area. Ensure sufficient clearance around the unit for proper air convection. The unit can be mounted horizontally or vertically, but consider the airflow direction for optimal cooling. Refer to the mechanical specifications for mounting hole dimensions (Figure 3.3).
- Wiring Input (AC):
- Connect the AC Live wire to the 'L' terminal (Pin 1).
- Connect the AC Neutral wire to the 'N' terminal (Pin 2).
- Connect the Frame Ground wire to the 'FG' terminal (Pin 3). This connection is critical for safety.
- Ensure all input wires are securely fastened and have appropriate gauge for the current draw.
- Wiring Output (DC):
- Connect the positive (+) load wire to the '+V' terminal (Pin 5).
- Connect the negative (-) load wire to the '-V' terminal (Pin 4).
- Verify correct polarity before connecting to the load device.
- Ensure all output wires are securely fastened and have appropriate gauge for the current draw.
- Voltage אַדזשאַסטמאַנט: דער רעזולטאַט וואָלtage can be finely adjusted using the 'V ADJ' potentiometer located near the output terminals. Use a non-conductive screwdriver for adjustment. צי ניט יקסיד די ספּעסיפיעד וואָלtage קייט.
- לעצט טשעק: Before applying power, double-check all wiring connections for correctness, security, and proper insulation.
5. אַפּערייטינג ינסטרוקטיאָנס
Once the power supply is correctly installed and wired, it is ready for operation.
- מאַכט אויף: Apply AC power to the input terminals. The green LED indicator on the unit will illuminate, indicating that the power supply is active and providing output voltage.
- רעזולטאַט חלקtage: The power supply will provide a stable 24V DC output. If adjustment is needed, refer to the "Voltage Adjustment" step in the Setup section.
- לאָדן קשר: Connect your DC load device to the output terminals, ensuring correct polarity.
- מאָניטאָרינג: Observe the LED indicator. If it is off, check the input power and connections.
5.1 Derating Curve and Static Characteristics
The performance of the power supply can be affected by ambient temperature and input voltage. Refer to the following curves for optimal operation.
Figure 5.1: Derating curve showing load percentage vs. ambient temperature, and static characteristics showing load percentage vs. input voltage.
- דערייטינג קורווע: Shows the maximum permissible load at different ambient temperatures. For temperatures above 50°C, the output power must be derated to prevent overheating.
- סטאַטיק קעראַקטעריסטיקס: Illustrates how the output load capacity is maintained across the input voltage קייט.
6. וישאַלט
The LRS-35-24 power supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance.
- רייניקונג: Ensure the ventilation holes are free from dust and debris. Use a soft, dry brush or compressed air to clean the unit if necessary. Do not use liquid cleaners.
- קשר טשעקס: Periodically inspect all input and output wiring connections to ensure they remain secure. Loose connections can cause intermittent operation or overheating.
- ינווייראַנמענאַל טנאָים: באַשטעטיקן אַז די אָפּערייטינג סביבה בלייבט אין די ספּעציפֿיצירטע טעמפּעראַטור און הומידיטי ריינדזשאַז.
- וויסואַל דורכקוק: Look for any signs of physical damage, discoloration, or unusual odors. If any issues are observed, disconnect power immediately and consult a qualified technician.
7. טראָובלעשאָאָטינג
די סעקציע גיט לייזונגען צו געוויינטלעכע פראבלעמען וואָס איר קענט באַגעגענען.
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| קיין רעזולטאַט וואָלtage / LED off | קיין AC אַרייַנגאַנג מאַכט פרייַ וויירינג קאַנעקשאַנז אינערלעכער שולד | Check AC power source and circuit breaker. Verify all input and output wiring connections are secure. If power is present and connections are good, the unit may be faulty. Contact support. |
| רעזולטאַט וואָלtage fluctuates or is incorrect | אָווערלאָאַד צושטאַנד Faulty load Voltage adjustment potentiometer disturbed | Reduce the load to within specifications. Disconnect the load and test the power supply independently. Carefully adjust the 'V ADJ' potentiometer to the desired voltage. |
| Unit is excessively hot | ניט גענוגיק ווענטאַליישאַן אָווערלאָאַד צושטאַנד הויך אַמביאַנט טעמפּעראַטור | Ensure adequate airflow around the unit. Clear any obstructions. Reduce the load. Check the derating curve (Figure 5.1). Relocate the unit to a cooler environment if possible. |
| Audible noise from unit | Normal operation (slight hum) Overload or fault condition | A slight hum can be normal. If noise is loud or unusual, check for overload. Disconnect power and contact support if noise persists and is concerning. |
For issues not covered here, please contact MEAN WELL technical support.
8. ספּעסאַפאַקיישאַנז
Detailed technical specifications for the LRS-35-24 power supply.
Figure 8.1: Comprehensive technical specifications for the LRS-35 series, including input, output, protection, and environmental data.
| פּאַראַמעטער | ווערט |
|---|---|
| מאָדעל | LRS-35-24 |
| DC Voltage | 24V |
| רייטאַד קראַנט | 1.5 א |
| רייטאַד מאַכט | 36 וו |
| Voltage קייט (איינגאנג) | 85 ~ 264 וואַק |
| אָפטקייַט ראַנגע | 47 ~ 63 הז |
| עפעקטיווקייַט | 88% |
| אַפּערייטינג טעמפּעראַטור | -30 ~ +70 °C |
| דימענסיעס (L X W X H) | 99 X 82 X 30 מם |
| וואָג | 0.23 קג |
| שוץ | קורץ קרייַז, אָווערלאָאַד, איבער וואָלtage |
| זיכערקייַט סטאַנדאַרדס | UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1/-2-16, CCC GB4943 approved |
9. וואָראַנטי
This MEAN WELL LRS-35-24 power supply comes with a 2 יאָר וואָראַנטי from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors such as power surges or natural disasters.
For warranty claims, please retain your proof of purchase and contact your retailer or MEAN WELL customer support.
10. שטיצן און קאָנטאַקט אינפֿאָרמאַציע
For technical assistance, troubleshooting, or further information regarding the MEAN WELL LRS-35-24 power supply, please refer to the official MEAN WELL webפּלאַץ אָדער קאָנטאַקט זייער קונה שטיצן.
- באַאַמטער Webפּלאַץ: www.meanwell.com
- מאַניואַלז: Specific product manuals can often be found at www.meanwell.com/manual.html
- קאָנטאַקט: זעט די "קאָנטאַקט אונדז" סעקציע אויף דער באַאַמטער webזייטל פֿאַר רעגיאָנאַלע שטיצע דעטאַילס.