Heller Tools HSS Steel Drill Bit User Manual

פּראָדוקט איבערview

This manual provides essential information for the safe and effective use of the Heller Tools 293020 HSS Steel Drill Bit. These drill bits are designed for precision drilling in various materials.

שליסל פֿעיִקייטן אַרייַננעמען:

• Particularly long service life and great drilling performance thanks to titanium coating.
• Split point grinding and 135° point angle for optimum centering during spot drilling.
• Manufactured in special HSS quality for a long service life.
• Precision tool as per DIN 338 RN for outstanding dimensional accuracy of the hole.
• Excellent concentricity as per DIN 1414.

אַפּפּליקאַטיאָנס: Suitable for drilling in steel, iron, castings, sheet metal, non-ferrous metals, plastics, steel and cast steel up to 1400 N/mm² strength.

Image: A single Heller Tools HSS Steel Drill Bit, showcasing its gold titanium coating and spiral flutes.

סעטאַפּ און צוגרייטונג

1. זיכערקייַט ערשטער: Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, before operating any power tools.
2. אויסקלייבן די ריכטיקע ביט: Choose the correct drill bit size (e.g., 9.5mm) and type for the material you intend to drill. Ensure the material is within the drill bit's application range (steel, iron, etc.).
3. זיכערער ארבעטסשטיק: Firmly secure the material to be drilled using a vise or clamps to prevent movement during drilling.
4. אינסטאַלירן ביט: Insert the drill bit into the chuck of your drill. Ensure the bit is fully seated and centered, then tighten the chuck securely. A loose bit can be dangerous and lead to inaccurate drilling.
5. מארקירן דרילינג פונקט: Use a center punch to mark the exact drilling location on your workpiece. This helps prevent the drill bit from wandering at the start of the drilling process.

אַפּערייטינג ינסטראַקשאַנז

1. אָנהייבן לאַנגזאַם: Begin drilling at a slow speed to allow the drill bit to properly engage the material and prevent it from skidding.
2. צולייגן קאָנסיסטענט דרוק: Once the bit has started to cut, apply steady, consistent pressure. Avoid excessive force, which can overheat the bit or cause it to break.
3. Maintain Speed: For optimal performance and to prevent overheating, maintain the recommended drilling speed for the specific material. Generally, harder materials require slower speeds.
4. ניצן שנייד פליסיק: When drilling metals, especially harder ones, use a suitable cutting fluid or lubricant. This reduces friction, dissipates heat, and extends the life of the drill bit.
5. קלאָרע טשיפּס: Periodically withdraw the drill bit from the hole to clear chips and allow coolant to reach the cutting edge. This is particularly important for deeper holes.
6. פֿאַרענדיקט דעם לאָך: Continue drilling until the desired depth is reached. Reduce pressure as the drill bit is about to break through the material to prevent splintering or sudden jerking.

Image: A person using a cordless drill with a Heller drill bit to bore into a metal workpiece secured in a vise, demonstrating proper drilling technique.

וישאַלט און סטאָרידזש

• רייניקונג: After each use, clean the drill bits to remove any debris, metal shavings, or cutting fluid residue. Use a brush or cloth.
• דורכקוק: Regularly inspect the drill bits for signs of wear, dullness, or damage. A dull bit will require more force and generate more heat, leading to poor performance and potential breakage.
• שאַרפּנינג: If the drill bit becomes dull, it can be professionally sharpened or sharpened using a suitable drill bit sharpener. Ensure the correct point angle (135°) is maintained.
• לובריקאציע/שוץ: Apply a light coat of oil to the drill bits before storage, especially if they will not be used for an extended period. This helps prevent rust and corrosion.
• סטאָרידזש: Store drill bits in their original case or a dedicated drill bit organizer. This protects the cutting edges from damage and keeps them organized. Store in a dry environment.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Specific warranty information for this product is not provided in the available data. For warranty claims or technical support, please contact Heller Tools directly through their official webפּלאַץ אָדער אָטערייזד דיסטריביאַטערז.

For further assistance, please refer to the manufacturer's official documentation or contact their customer service department.