Utilitech 0302325

Utilitech 0302325 Candelabra Light Control Instruction Manual

מאָדעל: 0302325

1. הקדמה

The Utilitech 0302325 Candelabra Light Control is designed to automate your incandescent lighting. This device features a dusk-to-dawn sensor, which automatically turns candelabra-based incandescent bulbs on when it gets dark and off when it becomes light. It is suitable for both indoor and outdoor applications, providing convenience and energy efficiency.

2. זיכערקייַט אינפֿאָרמאַציע

ביטע ליינט און פארשטייט אלע אינסטרוקציעס איידער איר אינסטאלירט אדער אפערירט דעם פראדוקט. נישט נאכפאלגן די אינסטרוקציעס קען רעזולטירן אין עלעקטרישע שאק, פייער, אדער אנדערע געפארן.

  • ווארענונג: ריזיקע פון ​​עלעקטרישן קלאַפּ. אָפּשטעקן די מאַכט ביים פיוז קעסטל אָדער קרייַז ברעאַקער איידער ינסטאַלירונג אָדער סערוויסינג.
  • This device is designed for use with incandescent bulbs only, up to 60W. Do not exceed the maximum wattage.
  • Ensure the light control is installed in a location where it is protected from direct water spray if used outdoors, although it is water resistant.
  • Do not attempt to modify or repair the device. Refer all servicing to qualified personnel.
  • האַלטן אַוועק פון קינדער.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער די אינסטאַלאַציע:

  • Utilitech 0302325 Candelabra Light Control (Quantity may vary based on purchase pack)
  • אינסטרוקציע מאַנואַל (דעם דאָקומענט)

4. סעטאַפּ און ייַנמאָנטירונג

The Utilitech 0302325 Candelabra Light Control features a simple screw-in installation process.

  1. קער אַוועק מאַכט: איידער איר הייבט אן די אינסטאַלאַציע, זיכערט זיך אז די מאַכט צו די ליכט איז אויסגעלאָשן ביים קרייז ברעיקער אדער פיוז קעסטל.
  2. אַראָפּנעמען עקסיסטינג באַלב: Carefully remove the existing candelabra-based incandescent bulb from the fixture.
  3. Screw in Light Control: Screw the Utilitech 0302325 Candelabra Light Control into the empty candelabra socket. Ensure it is securely tightened.
  4. ינסטאַלירן באַלב: Screw your candelabra-based incandescent bulb (up to 60W) into the socket on the Utilitech light control.
  5. פּאַזישאַנינג: For optimal performance, ensure the sensor on the light control is not obstructed and can detect ambient light levels accurately. Avoid positioning it where artificial light sources (e.g., other lamps, streetlights) might directly shine on the sensor, as this could interfere with its operation.
  6. ומקערן מאַכט: Once the light control and bulb are securely installed, restore power to the fixture at the circuit breaker or fuse box.
Utilitech 0302325 Candelabra Light Control, bronze color, shown with a candelabra bulb screwed into it, ready for installation into a light fixture.

Figure 1: Utilitech 0302325 Candelabra Light Control. This image shows the bronze-colored light control unit, designed to screw into a candelabra socket, with a bulb then screwing into the control unit itself.

5. אָפּעראַציע

The Utilitech 0302325 Candelabra Light Control operates automatically based on ambient light levels.

  • Dusk-to-Dawn Functionality: The integrated sensor detects when natural light levels fall below a certain threshold (dusk) and automatically turns on the connected incandescent bulb.
  • אָטאַמאַטיק פאַרמאַכן: When natural light levels rise above the threshold (dawn), the sensor will automatically turn off the connected bulb.
  • No manual adjustment or programming is required for its basic operation.

6. וישאַלט

The Utilitech 0302325 Candelabra Light Control requires minimal maintenance.

  • רייניקונג: Periodically wipe the exterior of the light control with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents. Ensure the sensor area remains clean for accurate light detection.
  • באַלב פאַרבייַט: When the incandescent bulb needs replacement, ensure power is turned off at the circuit breaker before unscrewing the old bulb and installing a new one.
  • There are no user-serviceable parts inside the light control unit.

7. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
ליכט צינדט זיך נישט אָן ביי פײַערנאַכט.
  • קיין מאַכט צו די ייַנאָרדענונג.
  • ציבעלע איז פארברענט.
  • Sensor is obstructed or receiving too much light.
  • Light control is faulty.
  • טשעק קרייַז צוימען / קאָריק.
  • פאַרבייַטן ציבעלע.
  • Ensure sensor is clear and not exposed to artificial light.
  • Replace the light control unit.
Light does not turn off at dawn.
  • Sensor is obstructed or not receiving enough light.
  • Light control is faulty.
  • Ensure sensor is clear and exposed to natural daylight.
  • Replace the light control unit.
Bulb shines at reduced brightness.
  • Incompatible bulb type (e.g., LED instead of incandescent).
  • Faulty light control unit.
  • Ensure an incandescent bulb is used. This device is designed for incandescent bulbs only.
  • Replace the light control unit.

8. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
מאָדעל נומער0302325 (Part Number: 43497-23210)
סאָרטוטיליטעק
טיפּDusk-to-dawn Candelabra Light Control
ייַנמאָנטירונג טיפּשרויף-אין
קאָמפּאַטאַביליטי פון ציבעלע טיפּIncandescent (Candelabra-based)
מאַקסימום וואַסערtage60 וואטס
Voltage120 וואלטס
דרינענדיק / דרויסנדיק באַניץדרינענדיק, דרויסנדיק
מאַטעריאַלפּלאַסטיק
קאָליר / ענדיקןבראָנדז
זיכערקייַט ליסטינגETL ליסטעד
פּונקט וואָג1.76 אונס (בעערעך 0.11 לבס)
דימענשאַנז (פּאַקאַץ)6.6 X 3.4 X 1 אינטשעס

9. וואָראַנטי און שטיצן

Specific warranty information for the Utilitech 0302325 Candelabra Light Control is typically provided with the product packaging or can be obtained from the retailer at the time of purchase. Please retain your proof of purchase for warranty claims.

For technical support or further assistance, please contact Utilitech customer service or refer to the official Utilitech webפּלאַץ פֿאַר קאָנטאַקט אינפֿאָרמאַציע. Visit Utilitech.com

© 2024 Utilitech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.