פּראָדוקט איבערview
This manual provides detailed instructions for the installation, operation, and maintenance of the Grandeur 837896 Carre' Tall Plate Georgetown Lever. The Carre' tall plate design is suitable for doors 84 inches or higher, ensuring an appropriate aesthetic proportion. This specific model features a privacy function and a 2.375-inch backset, with an Antique Pewter finish and a left-hand orientation.
Image: Grandeur Carre' Tall Plate Georgetown Lever in Antique Pewter, showcasing the design and finish.
שליסל פֿעיִקייטן
- מאַטעריאַל: Constructed from solid, forged brass for enhanced durability and longevity.
- Design Suitability: Specifically designed for doors that are 84 inches or taller, providing a balanced visual appearance.
- ייַנמאָנטירונג: Includes a drilling template and all necessary mounting hardware for straightforward installation.
- ענדיקן אָפּציעס: Available in a selection of designer finishes to complement various interior styles.
- איבערגעבן: For left-hand doors, hinges are located on the left side when viewed from outside. The privacy pin will be positioned on the right side of the knob.
Door Handing Guide
Correctly identifying your door's handing is crucial for selecting and installing the appropriate hardware. Refer to the diagram below to determine if your door is left-handed or right-handed.
Image: Diagram illustrating how to determine door handing. A left-hand door has hinges on the left from the outside, with the inside lever pointing right. A right-hand door has hinges on the right from the outside, with the inside lever pointing left.
- לינקס האַנט טיר: From the outside, the hinges are on the left. From the inside, the lever points right, toward the hinges.
- רעכט האַנט טיר: From the outside, the hinges are on the right. From the inside, the lever points left, toward the hinges.
ינסטאַלירונג אינסטרוקציעס
This section outlines the steps required to install your Grandeur Carre' Tall Plate Door Hardware. Ensure you have a drill, 1/4" drill bit, and a #2 Phillips screwdriver. This guide is for doors 1-3/8" to 2" thick.
Image: Detailed diagram showing the installation steps for the Grandeur Tall Plate Door Hardware.
- Door Preparation Information: Ensure your door has a 2-1/8" diameter bore hole, a 1" diameter edge bore, and a backset of either 2-3/8" or 2-3/4".
- ינסטאַלירן לאַטש: Insert the latch into the edge bore. Rotate the latch tongue to adjust for the correct door handing. Refer to the 'Latch Tongue Note' for details.
- Latch Tongue Note: To change handing, rotate the bolt of the latch tongue to hold it in place, then rotate again. The latch tongue is reversible, and the curved end is designed for the plate.
- מארק מאַונטינג האָלעס: Use the provided universal drilling template. For passage/privacy functions, align the template with the bore hole, ensuring it is level, and mark the top mounting hole. For privacy functions only, align the bottom drilling hole in the template with the bore hole and mark the bottom mounting hole. Drill the marked mounting holes and enlarge the door entry with a 1/4" drill bit.
- Mount Exterior Tall Plate: First, install the two screw extenders into the exterior tall plate. Then, mount the exterior tall plate onto the door. Verify that turning the knob/lever retracts the latch mechanism.
- Mount Interior Tall Plate: Attach the interior tall plate using the included 1-1/2" machine screws. Confirm that turning the knob/lever retracts the latch.
- Attach Strike Plate: Secure the strike plate to the door jamb using the provided 3/4" long wood screws.
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| סאָרט | גראַנדור |
| מאָדעל נומער | 837896 |
| מאַטעריאַל | מעש |
| קאָליר | אַנטיק צין |
| סטייל | לינקס האַנט |
| פּראָדוקט דימענשאַנז | 11"ל x 2.5"ברייט |
| פּונקט וואָג | 5.75 פונט |
| טיפּ פון שעפּן | לעווער |
| לאַק טיפּ | Privacy (Key Lock) |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | Door lever and chosen tall plate for both sides of door, latch mechanism, privacy spindle, privacy pin, strike plate and mounting screws. |
| GTIN / UPC | 662972378961 |
וישאַלט
To ensure the longevity and appearance of your Grandeur door hardware, regular maintenance is recommended:
- ריין די ייבערפלאַך מיט אַ ווייך, דamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער, סאָלווענטן, אָדער פּאָלירנדיקע אגענטן, ווײַל די קענען שאַטן די ענדיקונג.
- Periodically check all mounting screws and tighten if necessary to maintain stability.
- Lubricate moving parts of the latch mechanism annually with a silicone-based lubricant to ensure smooth operation.
טראָובלעשאָאָטינג
If you encounter issues with your door hardware, consider the following common solutions:
- Lever not retracting latch: Ensure all screws are tightened correctly and the spindle is properly engaged with the latch mechanism. Check for any obstructions.
- Latch not engaging: Verify that the strike plate is correctly aligned with the latch bolt. Adjust the strike plate position if needed.
- Loose hardware: Tighten all visible mounting screws. If the issue persists, re-check the installation steps for proper component assembly.
- Stiff operation: Apply a small amount of silicone lubricant to the latch bolt and spindle mechanism.
וואָראַנטי אינפֿאָרמאַציע
The Grandeur 837896 Carre' Tall Plate Georgetown Lever is backed by a לעבן וואָראַנטי. This warranty covers defects in material and workmanship under normal use. For specific details regarding warranty claims and coverage, please refer to the official Grandeur Hardware warranty documentation or contact customer support.
שטיצן
For further assistance, technical support, or to inquire about replacement parts, please contact Grandeur customer service. Contact information can typically be found on the manufacturer's official webפּלאַץ אָדער אַרייַנגערעכנט אין די פּראָדוקט פּאַקקאַגינג.