Metronic 495432

Metronic 495432 Wi-Fi Repeater 300 Mbps User Manual

מאָדעל: 495432

1. הקדמה

Thank you for choosing the Metronic 495432 Wi-Fi Repeater. This device is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a stable, high-speed internet connection throughout your home or office. With speeds up to 300 Mbps, it ensures a seamless online experience for all your connected devices. This manual will guide you through the installation, configuration, and troubleshooting processes.

2. פּראָדוקט איבערview

2.1 שליסל פֿעיִקייטן

  • Extends Wi-Fi range up to 300 Mbps.
  • Universal compatibility with all internet boxes.
  • Secure wireless connection.
  • Easy one-button WPS installation.
  • Functions as a Wi-Fi repeater or access point.
  • Equipped with a MEDIATEK chip for reliable performance.
  • Features external antennas for enhanced signal.
  • Includes 1x 10/100 Mbps Ethernet port.

2.2 פּעקל אינהאַלט

  • Metronic 300 Mbps Wi-Fi Repeater
  • באַניצער מאַנואַל (דעם דאָקומענט)

2.3 מיטל אויסלייג

Metronic 495432 Wi-Fi Repeater front view

פיגורע 1: פראָנט view of the Metronic 495432 Wi-Fi Repeater, showing LED indicators for power, Wi-Fi signal, and Ethernet activity.

Metronic 495432 Wi-Fi Repeater side view with WPS button and Ethernet port

פיגורע 2: זייַט view of the repeater, highlighting the WPS/Reset button and the Ethernet port. The WPS button is used for quick setup, and the Ethernet port allows for wired connections or Access Point mode.

Metronic 495432 Wi-Fi Repeater with external antenna

פיגורע 3: נאָענט-אַרויף view of the external antenna on the Metronic 495432 Wi-Fi Repeater, designed to enhance signal reception and transmission.

3. סעטאַפּ גייד

Before starting, choose an optimal location for your repeater. It should be placed within the existing Wi-Fi coverage of your main router, ideally halfway between your router and the area with weak signal. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.

3.1 Method 1: WPS Configuration (Recommended for quick setup)

  1. Plug the Metronic Wi-Fi Repeater into an electrical outlet. Wait for the Power LED to light up.
  2. דריק דעם WPS קנעפּל אויף אייער הויפּט Wi-Fi ראַוטער.
  3. Within two minutes, press the WPS/Reset button on the Metronic Wi-Fi Repeater (refer to Figure 2).
  4. The Wi-Fi LED on the repeater will flash during the connection process and then turn solid when successfully connected.
  5. The repeater will now extend your existing Wi-Fi network with the same network name (SSID) and password.

3.2 מעטאָד 2: Web בלעטערער קאַנפיגיעריישאַן

  1. Plug the Metronic Wi-Fi Repeater into an electrical outlet.
  2. On your computer or mobile device, connect to the repeater's default Wi-Fi network (SSID usually starts with "Wireless-N" or similar, check the label on the device). No password is required for the initial connection.
  3. עפענען א web בראַוזער (למשל, קראָום, פייערפאָקס) און אַרייַן די פעליקייַט IP אַדרעס (געוויינטלעך 192.168.10.1 or repeater.net, check the device label or manual for exact address).
  4. Log in using the default username and password (typically admin פֿאַר ביידע).
  5. Follow the on-screen wizard to select your desired operating mode (Repeater or Access Point) and configure the network settings. For Repeater mode, select your main Wi-Fi network from the list and enter its password.
  6. Save the settings. The repeater will restart.
  7. Once restarted, the repeater will extend your Wi-Fi network. You can now connect your devices to the extended network.

4. אָפּעראַציע

The Metronic 495432 Wi-Fi Repeater supports two primary operating modes:

4.1 רעפּעאַטער מאָדע

In Repeater Mode, the device wirelessly connects to your existing Wi-Fi network and re-broadcasts the signal, effectively extending its coverage. This is the most common use case for eliminating Wi-Fi dead zones. Devices connected to the repeater will use the same network name and password as your main router.

4.2 אַקסעס פּוינט (AP) מאָדע

In Access Point Mode, the device connects to your main router via an Ethernet cable (using the RJ45 port). It then creates a new Wi-Fi network, converting a wired internet connection into a wireless one. This is useful for adding Wi-Fi capability to a wired-only network or creating a separate Wi-Fi network.

5. וישאַלט און קער

  • רייניקונג: ניצט אַ ווייכע, טרוקענע שטאָף צו רייניקן דעם אַפּאַראַט. ניצט נישט קיין פליסיקע רייניגער אָדער אַעראָזאָלן.
  • אָרט: Ensure the repeater is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • מאַכט: Always disconnect the power before cleaning or if the device will be unused for an extended period.
  • Firmware דערהייַנטיקונגען: קאָנטראָלירט פּעריִאָדיש דעם פאַבריקאַנט'ס webזייטל פֿאַר פירמווער דערהייַנטיקונגען צו ענשור אָפּטימאַל פאָרשטעלונג און זיכערהייט.

6. טראָובלעשאָאָטינג

  • קיין מאַכט: Ensure the repeater is securely plugged into a working electrical outlet. Check if the Power LED is illuminated.
  • Cannot Connect to Repeater's Wi-Fi: Verify you are selecting the correct network name. If using web browser setup, ensure you are connecting to the repeater's default SSID.
  • No Internet Access After Setup:
    • Ensure the repeater is within range of your main router's Wi-Fi signal.
    • באַשטעטיקן אַז די Wi-Fi פּאַראָל וואָס איז אריין אין די סעטאַפּ איז ריכטיק.
    • Try restarting both your main router and the repeater.
  • אָפטע דיסקאַנעקשאַנז אָדער פּאַמעלעך גיכקייט:
    • Relocate the repeater closer to your main router or away from potential interference sources.
    • Ensure there are no physical obstructions (thick walls, metal objects) between the repeater and your devices or the main router.
    • Check for firmware updates for the repeater.
  • Forgot Login Password for Web צובינד: Press and hold the WPS/Reset button for approximately 10 seconds until the LEDs flash. This will reset the repeater to factory default settings, and you can log in with the default username and password (admin/admin).

7. טעכניש ספּעסאַפאַקיישאַנז

שטריךבאַשרייַבונג
מאָדעל נומער495432
סאָרטמעטראָניק
ווירעלעסס קאָמוניקאַציע סטאַנדאַרד802.11bgn
דאַטאַ אַריבערפירן קורס300 מעגאביץ פּער סעקונדע
אָפטקייַט באַנד קלאַסאיין-באַנד (2.4 GHz)
ספּעציעלע פֿעיִקייטןפּאָרטאַטיוו, ווירעלעסס
קאָלירווייַס
אַרייַנגערעכנט קאַמפּאָונאַנץMetronic 300 Mbps Wi-Fi Repeater
קאַמפּאַטאַבאַל דעוויסעסConnected TV, Smartphones, Tablets, Laptops
עטהערנעט פּאָרט1x RJ45 (10/100 Mbps)
מאַכט צושטעלן230 וו ~ 50 הז
לאַנד פון אָריגיןכינע

8. וואָראַנטי און שטיצן

Metronic products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Metronic webפּלאַץ.

For technical support, troubleshooting assistance, or any questions regarding your Metronic 495432 Wi-Fi Repeater, please contact Metronic customer service. Contact details can typically be found on the official Metronic webוועבזייטל אדער אויף אייער פּראָדוקט פּאַקאַדזשינג.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.