Inkbird ITC-308 Digital Temperature Controller User Manual

1. הקדמה

The Inkbird ITC-308 is a reliable and easy-to-use digital temperature controller designed for precise temperature regulation. It features dual relay output, allowing it to control both heating and cooling devices simultaneously. This makes it suitable for a wide range of applications, including homebrewing, fermenting, greenhouse climate control, and terrarium environments. The controller provides clear digital displays for both the current measured temperature and your desired set temperature, along with audible alarms for temperature deviations.

2. פּראָדוקט איבערview

2.1 קאַמפּאָונאַנץ

• ITC-308 Temperature Controller Unit
• טעמפּעראַטור פּראָבע
• מאַכט שנור

2.2 פֿעיִקייטן

• באַקוועם פּלאַן: Plug and play operation, easy to use. Supports display in Celsius or Fahrenheit.
• צווייענדיק רעלע רעזולטאַט: Capable of connecting to both refrigeration and heating equipment simultaneously.
• Dual Display Windows: Allows for simultaneous viewing of the measured temperature (PV) and the set temperature (SV).
• High and Low-Temperature Alarms: A buzzer will sound when the temperature reaches preset high or low limits.
• מאַקסימום רעזולטאַט מאַסע: 1100 W (110 V).
• Calibration and Compressor Delay: Includes temperature calibration and compressor delay functions to protect refrigeration equipment.

2.3 פּראָדוקט בילדער

3. סעטאַפּ אינסטרוקציעס

Follow these steps to set up your Inkbird ITC-308 temperature controller for optimal performance. This example demonstrates setting a temperature range from 75°F to 80°F.

3.1 ערשט מאַכט אויף

Plug the ITC-308 into a standard 110V power outlet. The digital displays will illuminate.

3.2 Setting the Target Temperature (TS)

1. דריקן און האַלטן די שטעלן button for 3 seconds until the PV display starts flashing. This indicates you are in the temperature setting mode.
2. ניצן די UP (▲) אדער אַראָפּ (▼) arrow buttons to adjust the target temperature (TS) to your desired value. For exampלע, שטעלט עס צו 76°F.
3. דרוק די שטעלן button again to confirm the setting and move to the next parameter.

3.3 Setting the Heating Differential (HD)

The Heating Differential (HD) determines how far the temperature can drop below the target temperature before the heating device turns on.

1. After setting TS, the display will show 'HD'. Use the UP (▲) אדער אַראָפּ (▼) arrow buttons to adjust the heating differential. For exampלע, שטעלט עס צו 1°F.
2. דרוק די שטעלן קנעפּל ווידער צו באַשטעטיקן.

3.4 Setting the Cooling Differential (CD)

The Cooling Differential (CD) determines how far the temperature can rise above the target temperature before the cooling device turns on.

1. After setting HD, the display will show 'CD'. Use the UP (▲) אדער אַראָפּ (▼) arrow buttons to adjust the cooling differential. For exampלע, שטעלט עס צו 4°F.
2. דריקן און האַלטן די שטעלן button for 3 seconds to save all settings and exit the menu.

Exampדי חשבון:
If TS = 76°F, HD = 1°F, CD = 4°F:
Heating: Heater turns on when temperature is ≤ 75°F (76 - 1), and shuts off when temperature is ≥ 76°F.
Cooling: Cooling device turns on when temperature is ≥ 80°F (76 + 4), and shuts off when temperature is ≤ 76°F.

4. אַפּערייטינג ינסטרוקטיאָנס

Once configured, the ITC-308 will automatically manage your heating and cooling devices to maintain the set temperature range. The top display (PV) shows the current measured temperature, and the bottom display (SV) shows your set target temperature.

4.1 קאַנעקטינג דעוויסעס

• Plug your heating device into the 'HEATING' outlet.
• Plug your cooling device into the 'COOLING' outlet.
• Ensure the temperature probe is placed in the environment you wish to control.

4.2 Temperature Alarms

The unit will sound an alarm if the measured temperature goes outside the configured high or low temperature limits. Refer to the full user manual for detailed instructions on setting alarm parameters.

5. וישאַלט

To ensure the longevity and accuracy of your Inkbird ITC-308, follow these general maintenance guidelines:

• רייניקונג: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• פּראָבע באַהאַנדלונג: Keep the temperature probe clean and free from debris. Avoid bending or damaging the probe cable.
• סטאָרידזש: If storing the unit for an extended period, unplug it from the power source and store it in a cool, dry place.

6. טראָובלעשאָאָטינג

If you encounter issues with your ITC-308, consider the following common troubleshooting steps:

• קיין מאַכט: Ensure the unit is securely plugged into a working power outlet. Check the power cord for any damage.
• אומרעכטע טעמפּעראַטור מעסטונג: Verify the temperature probe is properly connected and positioned. Clean the probe if necessary. Consider recalibrating the temperature if readings are consistently off (refer to the full user manual for calibration steps).
• Heating/Cooling Device Not Activating: Check if the heating/cooling device is properly plugged into the correct outlet on the controller. Ensure the set temperature and differential settings are appropriate for the desired operation.
• Alarm Sounds Continuously: Check the current temperature against your set high and low alarm limits. Adjust the limits or the environment's temperature as needed.

For more detailed troubleshooting or complex issues, please refer to the comprehensive user manual or contact Inkbird customer support.

7. ספּעסאַפאַקיישאַנז

8. וואָס איז אין דער קעסטל

Upon opening your Inkbird ITC-308 package, you should find the following items:

• 1 x ITC-308 Temperature Controller
• 1 רענטגענ טעמפּעראַטור זאָנד
• 1 x Socket (integrated with controller)
• 1 x Controller Panel (integrated with controller)

9. וואָראַנטי און שטיצן

Inkbird products are designed for reliability and performance. For detailed warranty information and customer support, please refer to the official Inkbird webוועבזייטל אדער די פולע באַניצער מאַנואַל וואָס איז צוגעשטעלט מיט דיין פּראָדוקט.

You can also access the official User Guide PDF דאָ.