HyperX Savage DDR4 Memory Module User Manual

הקדמה

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

בילד: פראָנט view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

פּעקל אינהאַלט

באַשטעטיקן אַז דיין פּעקל כּולל די פאלגענדע זאכן:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

סעטאַפּ און ינסטאַלירונג

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. צוגרייטונג

1. קאָמפּאַטיביליטי טשעק: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. מאַכט אַוועק: Shut down your computer completely and disconnect the power cable.
3. אפענער קעיס: Open your computer's side panel to access the motherboard.

2. מאָדולע ינסטאַלירונג

1. געפינען די DIMM סלאָץ: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. עפֿענען קליפּס: Gently push down the retention clips at both ends of the DIMM slot.
3. אויסגלייַכן מאָדול: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. אַרײַנשטעלן מאָדול: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. איבערחזרן: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

בילד: ווינקלדיק view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. פּאָסטן-ינסטאַללאַטיאָן

1. שליסן פאַל: צוריקצושטעלן די זייט-פאנעל פון אייער קאמפיוטער קעיס.
2. רעקאָננעקט מאַכט: Plug the power cable back into your computer and power it on.

אַפּערייטינג ינסטראַקשאַנז

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) פּראָfileס. די פּראָfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. צוטריט צו בייאָס/UEFI: During system startup, repeatedly press the designated key (commonly DEL, F2, פ10, אָדער פ12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. געפינען די XMP סעטינג: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. אַקטיווירן פּראָfile: אויסקלייבן דעם XMP פּראָfile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. היט און אַרויסגאַנג: ראַטעוועט די ענדערונגען און פֿאַרלאָזט די בייאָס/UEFI. אייער סיסטעם וועט זיך ריסטאַרטן מיט די נייע זכּרון סעטטינגס וואָס זענען אַפּליצירט געוואָרן.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

וישאַלט

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• האַלטן ריין: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• געהעריק באַהאַנדלונג: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• טעמפּעראַטור קאָנטראָל: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

טראָובלעשאָאָטינג

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• סיסטעם בוטט נישט:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile איז ענייבאַלד.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• סיסטעם אינסטאביליטעט אדער קראַשיז:
  • לויפט א זכּרון דיאַגנאָסטיק געצייַג (למשל, Windows Memory Diagnostic אדער MemTest86) צו קאָנטראָלירן פֿאַר ערראָרס.
  • זיכער מאַכן אַז אייער מאַכט צושטעלן אַפּאַראַט (PSU) גיט גענוג און סטאַביל מאַכט צו אַלע קאָמפּאָנענטן.
  • Check for proper cooling within your system to prevent overheating.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webזייטל אדער קאנטאקט זייער קאסטומער סערוויס. האלט אייער באווייז פון קויפן פאר גאראנטיע וואַלידאציע.

HyperX Support: www.hyperx.com/support