Fengda BD-116C Airbrush Gun User Manual

הקדמה

This manual provides instructions for the safe and effective operation and maintenance of your Fengda BD-116C Airbrush Gun. Please read this manual thoroughly before use and retain it for future reference.

זיכערקייַט אינפֿאָרמאַציע

ווארענונג:

• Protect yourself from chemical exposure. Always use appropriate personal protective equipment (PPE) such as respirators, gloves, and eye protection when handling paints and cleaning solutions.
• Handle pressurized components carefully. Ensure all connections are secure before operating the airbrush. Never point the airbrush at yourself or others.
• Ensure proper application of used materials. Dispose of paints, solvents, and cleaning solutions according to local environmental regulations.
• האַלטן אויס פון דערגרייכן פון קינדער.
• נוצן אין אַ געזונט-ווענאַלייטיד געגנט.

פּעקל אינהאַלט

באַשטעטיקט אַז אַלע זאכן וואָס זענען אויסגערעכנט אונטן זענען אַרייַנגערעכנט אין אייער פּעקל:

• 1 x BD-R 116 Airbrush Gun
• 1 x Metal Paint Cup (2 ml)
• 1 x Metal Paint Cup (5 ml)
• 1 x Metal Paint Cup (13 ml)
• 3 x Nozzles (0.3 mm, 0.5 mm, 0.8 mm)
• 3 x Needles (0.3 mm, 0.5 mm, 0.8 mm)
• 2 x Air Connectors
• 1 רענטגענ לופט קישקע (2 מעטער)
• 1 x Mounting Tool
• 1 x באַניצער מאַנואַל (דאָס דאָקומענט)
• 1 x Molded Plastic Storage Box

Image: The Fengda BD-116C Airbrush Gun with its various nozzles, needles, paint cups, air hose, and tools, all neatly arranged in its storage box.

סעטאַפּ

1. אָפּלייגן קאַמפּאָונאַנץ: Carefully remove all items from the storage box. Inspect for any damage.
2. Select Nozzle and Needle: Choose the appropriate nozzle and needle size (0.3mm, 0.5mm, or 0.8mm) for your painting task. The 0.3mm is for fine details, 0.5mm for general work, and 0.8mm for broader coverage. Ensure the needle matches the nozzle size.
3. Assemble Nozzle and Needle:
   • Unscrew the needle chucking guide and pull out the needle.
   • Unscrew the nozzle cap and remove the nozzle.
   • Carefully insert the chosen nozzle and screw the nozzle cap back on. Do not overtighten.
   • Reinsert the chosen needle from the rear of the airbrush, pushing it gently until it seats correctly in the nozzle.
   • Tighten the needle chucking guide.
4. צוטשעפּען פאַרב גלעזל: Screw the desired paint cup (2ml, 5ml, or 13ml) onto the top of the airbrush gun.
5. פאַרבינדן לופט שלאַנג: Attach one end of the 2-meter air hose to the airbrush gun's air inlet and the other end to your air compressor (not included). Ensure connections are secure to prevent air leaks.
6. צוגרייטן אַרבעט שטח: Set up your workspace in a well-ventilated area. Cover surfaces to protect them from overspray.

אַפּערייטינג ינסטראַקשאַנז

1. צוגרייטן די פארב: Thin your paint to the consistency recommended by the paint manufacturer for airbrushing. Test the consistency on a scrap surface.
2. פּלאָמבירן פאַרב גלעזל: גיסט פֿאָרזיכטיק די צוגעגרייטע פֿאַרב אין דעם צוגעבונדענעם פֿאַרב־בעכערל. פֿילט נישט צו פֿיל.
3. פאַרבינדן מאַכט: If your compressor is battery-powered, ensure it is charged. Connect the compressor to a power source if it requires mains electricity.
4. אײַנשטעלן דעם קאָמפּרעסאָר: Activate your air compressor and set the desired air pressure. Start with a lower pressure and adjust as needed.
5. טעסט שפּריץ: איידער איר לייגט אויף פארב צו אייער פראיעקט, פרובירט אויס דעם שפריץ-מוסטער אויף א שטיקל מאטעריאל.
6. Airbrush Technique:
   • Hold the airbrush approximately 5-15 cm (2-6 inches) from the surface, depending on the desired spray pattern and detail.
   • Press down on the trigger for air flow.
   • Pull back on the trigger to release paint. The further you pull back, the more paint is released.
   • Maintain a consistent distance and movement for even coverage.
   • Always start and end your spray off the work surface to avoid paint build-up.
7. אַדזשאַסטינג פלוס: Use the needle stop screw at the rear of the airbrush to limit how far the needle can retract, controlling the maximum paint flow.
8. ענדיקן: When finished painting, release the trigger completely. Turn off your air compressor.

וישאַלט און רייניקונג

Proper cleaning after each use is essential for the longevity and performance of your airbrush gun.

1. ערשט רינס: Empty any remaining paint from the cup. Add a small amount of appropriate cleaner (water for acrylics, solvent for enamels/lacquers) to the cup. Spray the cleaner through the airbrush until it runs clear.
2. צוריק-פלאַש: Place your finger over the nozzle cap and press down for air, then pull back for paint. This will force air back into the paint cup, bubbling the cleaner and helping to dislodge paint particles. Repeat several times.
3. צענעמען פאר א טיפע רייניקונג: For a thorough clean, disassemble the airbrush:
   • Remove the paint cup.
   • Unscrew the needle chucking guide and carefully pull out the needle from the rear. Clean the needle with a cloth dampened with cleaner.
   • Unscrew the nozzle cap and remove the nozzle. Clean the nozzle carefully with a soft brush and cleaner.
   • Clean the airbrush body and paint channel with a brush and cleaner.
4. ריאַסעמבאַל: Once all parts are clean and dry, reassemble the airbrush. Apply a tiny amount of airbrush lubricant (if available) to the needle and trigger mechanism.
5. סטאָרידזש: Store the airbrush in its original storage box to protect it from dust and damage.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

• מאָדעל: BD-116C
• סאָרט: פענגדאַ
• נעזל סיזעס: 0.3 מם, 0.5 מם, 0.8 מם
• נאָדל גרייסן: 0.3 מם, 0.5 מם, 0.8 מם
• Paint Cup Capacities: 2 ml, 5 ml, 13 ml (metal)
• לופט קישקע לענג: 2 מעטער
• מאַטעריאַל: מעטאַל
• מאַכט מקור: Battery (for compatible compressors, airbrush itself is pneumatic)
• פּראָדוקט דימענשאַנז (פּאַקאַץ): 24.3 X 18.3 X 4.9 סענטימעטער
• פּראָדוקט וואָג (פּאַקעט): 670 ג

וואָראַנטי און שטיצן

פֿאַר וואָראַנטי אינפֿאָרמאַציע אָדער טעכנישע שטיצע, ביטע זען די דאָקומענטאַציע וואָס איז צוגעשטעלט געוואָרן מיט אייער קויף אָדער קאָנטאַקט אייער הענדלער. האַלט אייער קויף באַווייַז פֿאַר וואָראַנטי קליימז.