Metra 99-6525HG
Metra 99-6525HG Single/Double DIN Dash Kit for Chrysler 300 (2011-Up)
Model: 99-6525HG | Brand: Metra
הקדמה
This instruction manual provides detailed guidance for the installation and use of the Metra 99-6525HG Single/Double DIN Dash Kit. This kit is specifically designed for 2011 and newer Chrysler 300 vehicles, allowing for the installation of an aftermarket single or double DIN radio. It features high-grade ABS plastic construction with precision tolerances to ensure a factory-matched texture and style.
Image: Metra 99-6525HG Single/Double DIN Dash Kit. This image displays the high gloss black dash kit components, including the main bezel and mounting brackets, designed to integrate an aftermarket radio seamlessly into the Chrysler 300 dashboard.
זיכערקייַט אינפֿאָרמאַציע
Please read all instructions carefully before beginning installation. Improper installation may result in damage to the vehicle, the product, or personal injury. Always disconnect the vehicle's battery before performing any electrical work. Wear appropriate safety gear, including eye protection. If you are unsure about any part of the installation process, consult a qualified professional installer.
- זיכער מאַכן אַז דאָס אויטאָ איז אויסגעלאָשן און די פּאַרקינג ברעיק איז אַקטיוויזירט.
- Disconnect the negative terminal of the vehicle's battery before starting.
- Use only appropriate tools for the installation.
- Avoid placing tools or components on hot surfaces or near moving parts.
- Keep all wiring clear of sharp edges and moving components.
פּעקל אינהאַלט
באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:
- Dash Kit (Main Bezel, Brackets)
- Axes Interface
- וויירינג כאַרניס
- Storage Pocket (for single DIN mounting)
- ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)
סעטאַפּ און ינסטאַלירונג
This section outlines the general steps for installing the Metra 99-6525HG dash kit. Specific vehicle disassembly instructions may vary and should be referenced from a vehicle-specific service manual or online resources.
- צוגרייטן די פאָרמיטל: Disconnect the negative battery terminal. Carefully remove the factory radio and associated trim panels from the dashboard. Refer to your vehicle's service manual for precise removal procedures.
- Assemble the Dash Kit:
- פֿאַר אַ איין טומל radio installation: Secure the provided storage pocket below the radio opening in the dash kit. Attach the single DIN mounting brackets to the sides of your aftermarket radio, then secure the radio and pocket assembly into the dash kit bezel.
- פֿאַר אַ טאָפּל דין radio installation: Attach the double DIN mounting brackets to the sides of your aftermarket radio, then secure the radio assembly into the dash kit bezel.
- וויירינג קאַנעקשאַנז: Connect the included wiring harness to your aftermarket radio and the vehicle's factory wiring. Utilize the Axes interface as directed by its separate instructions to retain factory features such as steering wheel controls (if applicable). Ensure all connections are secure and properly insulated.
- טעסט פאַנגקשאַנאַליטי: Before reassembling the dashboard, temporarily reconnect the vehicle's battery and test the aftermarket radio's functionality (power, audio, steering wheel controls, etc.).
- לעצט פֿאַרזאַמלונג: Once all functions are verified, disconnect the battery again. Carefully route all wiring to prevent pinching or interference. Install the assembled dash kit with the aftermarket radio into the vehicle's dashboard opening. Reinstall all removed trim panels and secure them properly.
- רעקאָננעקט באַטערי: ריקאַנעקט די נעגאַטיוו באַטאַרייע וואָקזאַל.
The kit is designed for an ISO Single/Double DIN mount, ensuring compatibility with a wide range of aftermarket head units.
אַפּערייטינג ינסטראַקשאַנז
This dash kit provides the structural and aesthetic framework for installing an aftermarket radio. Operating instructions for the radio itself will be found in the manual provided by the radio manufacturer. Once installed, the radio will function according to its own specifications and controls.
וישאַלט
The Metra 99-6525HG dash kit requires minimal maintenance. To keep the high gloss black finish clean, gently wipe it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure no liquids enter the radio or vehicle's electrical components.
טראָובלעשאָאָטינג
If you encounter issues after installing the dash kit and aftermarket radio, consider the following:
- ראַדיאָ גייט נישט אָן:
- Check all wiring connections, especially power and ground wires, for secure contact.
- Verify the vehicle's fuse for the radio circuit is intact.
- Ensure the vehicle's battery is properly reconnected and charged.
- קיין אַודיאָ:
- Confirm speaker wire connections are correct and secure.
- Check the radio's settings for mute or volume levels.
- שטייער ראָד קאָנטראָלס אַרבעטן נישט:
- Refer to the specific instructions for the Axes interface to ensure it is correctly wired and programmed for your vehicle and radio.
- Verify the interface is receiving power.
- Dash Kit Does Not Fit Flush:
- Ensure all factory mounting points are clear of obstructions.
- Double-check that the radio and brackets are correctly seated within the dash kit.
- Verify that no wires are pinched or preventing the kit from seating properly.
For persistent issues, consult the aftermarket radio's manual or contact Metra technical support.
ספּעסאַפאַקיישאַנז
| סאָרט | מעטראַ |
| מאָדעל נאָמען | 99-6525HG |
| מאָדעל נומער | 99-6525HG |
| קאָליר | הויך גלאָס שוואַרץ |
| מאַטעריאַל | אַקרילאָניטרילע בוטאַדיענע סטירענע (אַבס) פּלאַסטיק |
| נומער דימענשאַנז (L X W X H) | 14 X 7.1 X 1 אינטשעס |
| פּונקט וואָג | 2 פונט |
| קאַמפּאַטאַבילאַטי | 2011 - Up Chrysler 300 Vehicles |
| מאַונטינג טיפּ | ISO Single/Double DIN |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | Dash Kit, Axes Interface, Wiring Harness, Storage Pocket |
וואָראַנטי אינפֿאָרמאַציע
The Metra 99-6525HG Dash Kit comes with a 1 יאָר לימיטעד וואָראַנטי. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
שטיצן
For technical assistance, installation questions, or warranty inquiries, please contact Metra Electronics Corp. customer support. You can typically find contact information on the official Metra webוועבזייטל אדער דורך דעם פארקויפער וואו דער פראדוקט איז געקויפט געווארן.
אָנליין רעסורסן: Visit the official Metra website for product updates, additional installation guides, and frequently asked questions.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.