ThermoPro TP12

ThermoPro TP12 Wireless Digital Meat Thermometer User Manual

מאָדעל: TP12

1. הקדמה

The ThermoPro TP-12 is a digital wireless thermometer designed to accurately monitor the internal temperature of your meat and the temperature of your oven or BBQ. With a remote range of up to 300 feet, this unit allows you to monitor your cooking from a distance, eliminating the need for constant supervision. It features dual probes, a timer, and various alarm functions to ensure your food is cooked perfectly every time.

This manual provides detailed instructions on how to set up, operate, and maintain your ThermoPro TP12 thermometer. Please read it thoroughly before first use.

2. זיכערקייַט אינפֿאָרמאַציע

  • ווארענונג: Do not touch the stainless steel probes or wires with bare hands during or immediately after cooking, as they will be extremely hot. Always wear heat-resistant gloves.
  • Keep the receiver and transmitter away from direct heat sources, open flames, or hot surfaces.
  • Do not immerse the receiver or transmitter in water or place them in a dishwasher. They are not waterproof.
  • The probes and wires are designed to withstand temperatures up to 716°F (380°C). Do not expose them to temperatures exceeding this limit.
  • Ensure the probe cable is not pinched or damaged by oven doors or grill grates.
  • האַלטן אויס פון דערגרייכן פון קינדער.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין דיין פּעקל:

  • 1 קס ופנעמער אַפּאַראַט
  • 1 x טראַנסמיטער אַפּאַראַט
  • 1 x Food Grade Stainless Steel Probe (6.5 inches)
  • 1 x Oven/BBQ Stainless Steel Probe (3 inches)
  • 4 X AAA באַטעריז
ThermoPro TP12 package contents including receiver, transmitter, two probes, and a probe clip.

Image: The ThermoPro TP12 package contents, showing the receiver and transmitter units, two stainless steel probes (one for food, one for oven/BBQ), and a metal clip for the oven probe.

4. פּראָדוקט קאָמפּאָנענטן און פֿעיִקייטן

ThermoPro TP12 receiver and transmitter with probes.

Image: The ThermoPro TP12 wireless thermometer system, displaying the receiver unit on the left with its large red display, the transmitter unit on the right, and the two stainless steel probes connected to the transmitter.

ופנעמער אַפּאַראַט

  • ווייַז: Large LCD display showing food and BBQ/oven temperatures, timer, and alarm indicators.
  • קנעפּלעך:
    • HI/HR: Adjusts high temperature setting for BBQ/oven, or sets hours for timer.
    • LO/MIN: Adjusts low temperature setting for BBQ/oven, or sets minutes for timer.
    • מאָדע / ליכט: Switches between temperature setting mode and timer mode; activates backlight.
    • סינק: Synchronizes receiver with transmitter.
    • אָנהייב / האַלטן: Starts or stops the timer.
    • HI/CL: Adjusts high temperature setting for food.
    • °F/°C: Toggles between Fahrenheit and Celsius.
  • שרעק: Flashes and beeps when programmed temperature is reached or connection is lost.

טראַנסמיטער יוניט

  • ווייַז: Small LCD display showing current probe temperatures.
  • Probe Jacks: Two ports for connecting the food and oven/BBQ probes.
  • מאַכט קנעפּל: אָנ / אַוועק באַשטימען.
  • דראָט שטיין: Integrated wire stand for tabletop use or hanging on an oven door.

פּראָבעס

  • עסנוואַרג פּראָבע: 6.5-inch food grade stainless steel probe with a step-down tip for accurate and fast temperature readings.
  • Oven/BBQ Probe: 3-inch stainless steel probe for monitoring ambient temperatures.
  • קאַבלע: 40-inch stainless steel mesh cable, designed to withstand high temperatures.
Close-up of the food probe with step-down tip design.

בילד: א נאָענטע בילד view of the 6.5-inch food grade stainless steel probe, highlighting its step-down tip design for improved accuracy and speed in temperature measurement.

5. סעטאַפּ אינסטרוקציעס

  1. אַרייַנלייגן באַטעריז:
    • Open the battery compartment on the back of both the receiver and transmitter units.
    • Insert 2 AAA batteries into each unit, ensuring correct polarity (+/-).
    • פאַרמאַכן די באַטאַרייע קאַמפּאַרטמאַנץ סיקיורלי.
    ThermoPro TP12 receiver and transmitter showing battery compartment and alarm features.

    Image: The ThermoPro TP12 receiver and transmitter units, illustrating the battery compartment location and icons representing the receiver's flash and beep alarm, dual temperature monitoring, and the inclusion of 4 AAA batteries.

  2. פֿאַרבינדן פּראָבעס:
    • Plug the food probe into the "FOOD" jack on the transmitter.
    • Plug the oven/BBQ probe into the "BBQ" jack on the transmitter.
  3. מאַכט אויף:
    • Slide the ON/OFF switch on the back of the transmitter to the "ON" position.
    • The transmitter's display will show the current temperatures from the probes.
    • The receiver will automatically synchronize with the transmitter. If not, press and hold the "SYNC" button on the receiver for 3 seconds.

6. אַפּערייטינג ינסטרוקטיאָנס

6.1 שטעלן טעמפּעראַטור אַלאַרמס

  1. אויסקלייבן פּראָבע: Press the "MODE/LIGHT" button on the receiver to cycle through "FOOD" temperature setting, "BBQ" high temperature setting, and "BBQ" low temperature setting.
  2. סטרויערן טעמפּעראַטור:
    • For "FOOD" temperature, press "HI/CL" to increase the target temperature.
    • For "BBQ" high temperature, press "HI/HR" to increase the target temperature.
    • For "BBQ" low temperature, press "LO/MIN" to increase the target temperature.
    • The temperature will cycle back to the minimum after reaching the maximum.
  3. באַשטעטיקן באַשטעטיקן: The setting will automatically save after a few seconds of inactivity, or you can press "MODE/LIGHT" again to move to the next setting.
  4. When the probe temperature reaches the set alarm temperature, the receiver will flash and beep. Press any button to stop the alarm.
ThermoPro TP12 monitoring meat and oven temperatures simultaneously.

Image: The ThermoPro TP12 system in use, showing the receiver displaying both meat and oven temperatures, with the transmitter placed near an oven, demonstrating its ability to monitor two temperatures concurrently.

6.2 ניצן די טיימער

  1. אַרייַן טייַמער מאָדע: Press the "MODE/LIGHT" button repeatedly until "TIMER" is displayed on the receiver.
  2. שטעלן קאַונטדאַון טייַמער:
    • Press "HI/HR" to set hours.
    • Press "LO/MIN" to set minutes.
    • Press "START/STOP" to begin the countdown.
    • To pause, press "START/STOP" again. To reset, press and hold "START/STOP" for 3 seconds.
  3. Count Up Timer: If the timer is set to 00:00 and "START/STOP" is pressed, the timer will begin counting up.
ThermoPro TP12 receiver displaying countdown and count up timer functions.

Image: The ThermoPro TP12 receiver unit demonstrating its countdown and count-up timer capabilities, showing how the display changes to indicate hours and minutes for timing cooking processes.

6.3 Switching Temperature Units (°F/°C)

Press the "°F/°C" button on the receiver to toggle between Fahrenheit and Celsius temperature displays.

6.4 Remote Range and Signal Loss

The ThermoPro TP12 offers a remote range of up to 300 feet in open areas. Factors such as walls, obstacles, and electromagnetic interference can reduce this range.

If the receiver loses connection with the transmitter, it will alert you with an alarm. Move the receiver closer to the transmitter to re-establish the connection.

ThermoPro TP12 showing 300ft remote range in an outdoor grilling setting.

Image: The ThermoPro TP12 in an outdoor grilling scenario, illustrating its 300-foot remote range capability, with the user holding the receiver unit while the transmitter is near the grill.

7. וישאַלט און קער

  • רייניקונג פּראָבעס: Wash the stainless steel probes with hot soapy water after each use. Rinse thoroughly and dry completely. Do not immerse the probe connectors or wires in water.
  • רייניקונג איינהייטן: Wipe the receiver and transmitter units with a damp טוך. ניצט נישט קיין שרײַבנדיקע רייניגערס און טונקט זיי נישט אײַן אין וואַסער.
  • סטאָרידזש: Store the thermometer in a dry place at room temperature when not in use. Remove batteries if storing for extended periods to prevent leakage.
  • פּראָבע באַהאַנדלונג: פֿאַרמײַדט צו בייגן אָדער קניפּן די פּראָבע קייבלס צו פֿיל, ווײַל דאָס קען שעדיקן די אינעווייניקסטע וויירינג.

8. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
No display on receiver/transmitter.טויטע אדער נישט ריכטיק אריינגעשטעלטע באַטעריעס.פאַרבייטן די באַטעריעס מיט נייע AAA באַטעריעס, און זאָרגט אַז די פּאָלאַריטעט איז ריכטיק.
Receiver not syncing with transmitter.Out of range; interference; transmitter off.Move receiver closer to transmitter. Ensure transmitter is on. Press and hold SYNC button on receiver.
ומפּינקטלעך טעמפּעראַטור רידינגז.Probe not fully inserted; damaged probe/cable.Ensure probe is fully inserted into the food/oven. Check probe cable for visible damage. Contact customer support for probe replacement if damaged.
דער שרעק קלינגט נישט.Volume too low; alarm disabled; battery low.Check receiver settings. Replace batteries.
"---" or "LLL" on display.Probe not connected or damaged; temperature out of range.Ensure probe is securely connected. If connected, probe may be damaged or temperature is below 32°F (0°C).
"HHH" on display.טעמפּעראַטור אויס פון קייט.Temperature is above 572°F (300°C). Remove probe from extreme heat.

9. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
טעמפּעראַטור ראַנגע32°F צו 572°F (0°C צו 300°C)
טעמפּעראַטור אַקקוראַסי± 1.8 ° F (± 1 ° C) פֿון 32-212 ° F (0-100 ° C)
Food Probe Length6.5 inches (food grade stainless steel)
Oven/BBQ Probe Length3 inches (stainless steel)
קאַבלע לענג40 inches (stainless steel mesh)
רימאָוט ראַנגעאַרויף צו 300 פֿיס (ליניע פון ​​דערזען)
Receiver Display Size1.5 X 1.3 אינטשעס (38 X 34 מם)
Transmitter Display Size1.0 X 0.5 אינטשעס (26 X 13.5 מם)
Probe & Wire Heat Resistanceאַרויף צו 716 ° F (380 ° C)
סערטיפיקאַטיאָנסFCC certified, CE certified, ROHS, FDA approved probe
מאַכט מקור4 x AAA batteries (2 for receiver, 2 for transmitter)

10. וואָראַנטי און שטיצן

ThermoPro provides a 1-year warranty for this product from the date of purchase. By registering your product after purchase, you can receive an extended 3-year warranty.

Additionally, ThermoPro offers a lifetime warranty on their sensor probes. If your probe experiences temperature reading problems, a brand-new replacement probe will be provided free of charge.

For warranty claims, technical support, or any questions regarding your ThermoPro TP12 thermometer, please contact ThermoPro Customer Service:

  • טעלעפֿאָן: 877-515-7797
  • Webפּלאַץ: Refer to the official ThermoPro webזייטל פֿאַר די מערסט אַקטועלע קאָנטאַקט אינפֿאָרמאַציע און שטיצע רעסורסן.

Please have your model number (TP12) and purchase information ready when contacting support.

© 2024 טערמאָפּראָ. אַלע רעכטן רעזערווירט.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.