הקדמה
This manual provides instructions for the safe and effective use of your ProMaster Camera Phone Tripod Mount Model 3421. Please read this manual thoroughly before use and retain it for future reference. This device is designed to securely attach smartphones to tripods or other mounting systems equipped with a standard 1/4"-20 screw.
פּראָדוקט איבערview
The ProMaster Camera Phone Tripod Mount Model 3421 features an adjustable opening to accommodate various smartphone sizes and a durable metal 1/4"-20 female thread for universal compatibility with tripods and monopods.
פיגורע 1: זייַט view of the ProMaster Camera Phone Tripod Mount, showing its compact design.
פיגורע 2: Top view of the mount, illustrating the adjustable opening with a measurement scale and the 1/4"-20 female thread mount.
סעטאַפּ
- Attach to Tripod: Locate the 1/4"-20 female thread at the base of the phone mount. Screw the mount onto the 1/4"-20 male screw of your tripod or monopod until it is securely fastened. Do not overtighten.
- אַרײַנשטעלן סמאַרטפאָון: Gently pull the top jaw of the mount upwards to open the adjustable grip. Carefully place your smartphone into the mount, ensuring it is centered and the jaws securely hold the device without obstructing buttons or ports. The mount accommodates phones with a minimum width of 2 inches and a maximum width of 3 3/4 inches.
- באַשטעטיקן סטאַביליטי: Once the phone is in place, ensure it is firmly held and does not wobble. Adjust the phone's position if necessary.
אַפּערייטינג ינסטראַקשאַנז
- Adjusting Phone Position: The mount allows for both vertical and horizontal phone orientation, depending on your tripod head's capabilities. Ensure the phone is balanced to prevent tipping.
- זיכער גריפּ: The spring-loaded mechanism provides a strong grip. Always check that your phone is fully seated and held firmly before leaving it unattended.
- Removing Smartphone: To remove your smartphone, gently pull the top jaw upwards to release the tension and carefully lift the phone out of the mount.
וישאַלט
- רייניקונג: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the material.
- סטאָרידזש: Store the mount in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- דורכקוק: Periodically inspect the mount for any signs of wear or damage, especially the spring mechanism and the 1/4"-20 thread. Do not use if damaged.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Smartphone does not fit in the mount. | Smartphone dimensions exceed the mount's capacity. | Ensure your smartphone's width is between 2 inches and 3 3/4 inches. Remove bulky cases if necessary. |
| Mount feels unstable on the tripod. | Mount not securely attached to the tripod. | Tighten the mount onto the tripod's 1/4"-20 screw until firm. Check the tripod's stability as well. |
| Phone slips out of the mount. | Phone not properly seated or mount is damaged. | Ensure the phone is centered and fully gripped by the jaws. Inspect the spring mechanism for damage. If damaged, discontinue use. |
ספּעסאַפאַקיישאַנז
פיגורע 3: Dimensions of the ProMaster Camera Phone Tripod Mount.
- מאָדעל: 3421
- סאָרט: פּראָמאַסטער
- מאַטעריאַל: מעטאַל
- מאַונטינג פֿאָדעם: Metal 1/4" - 20 female thread
- Minimum Opening: 2 אינטשעס (5.08 סענטימעטער)
- מאַקסימום עפן: 3 3/4 אינטשעס (9.53 סענטימעטער)
- פּראָדוקט דימענשאַנז (H x W x D): 2 5/8" x 2 3/16" x 1 1/4" (approx. 6.67 cm x 5.56 cm x 3.18 cm)
- נומער וואָג: 1.6 אונסעס (45.36 גראַמז)
- קאַמפּאַטאַבאַל דעוויסעס: סמאַרטפאָנעס
- וואָג לימיט: 6.6 פונט (3 ק"ג) - Note: This refers to the maximum weight the mount itself can support, not the phone's weight.
וואָראַנטי און שטיצן
For detailed warranty information, product registration, or technical support, please visit the official ProMaster webזייטל אדער קאנטאקט דעם פארקויפער פון וועמען איר האט געקויפט דאס פראדוקט. האלט אייער באווייז פון קויפן פאר גאראנטיע פארלאנגען.
פּראָמאַסטער באַאַמטער Webפּלאַץ: פּראָמאַסטער קראָם אויף אַמאַזאָן