Huanyu AEL-1000N Electric Single Column Test Stand Instruction Manual

1. הקדמה

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of the Huanyu AEL-1000N Electric Single Column Test Stand. The AEL-1000N is designed as a force load test platform, specifically compatible with HF and NK series force measurement gauges. It features a double vertical rod structure, ensuring stability and a wide range of applications.

2. זיכערקייַט אינפֿאָרמאַציע

Always adhere to the following safety guidelines to prevent injury and damage to the equipment:

• Ensure the test stand is placed on a stable, level surface.
• באַשטעטיקן די מאַכט צושטעלן וואָלtage (220V/110V) matches the equipment requirements before connecting.
• Do not exceed the maximum load capacity of 1000N.
• האַלט הענט און פרייַ קליידער ווײַט פֿון באַוועגלעכע טיילן בעת ​​אָפּעראַציע.
• Regularly inspect the equipment for any signs of wear or damage. Do not operate if damaged.
• נאָר קוואַליפֿיצירטע פּערסאָנעל זאָל דורכפירן וישאַלט אָדער ריפּערז.
• Disconnect power before performing any adjustments or maintenance.

3. פּראָדוקט איבערview

3.1. פֿעיִקייטן

• Electric Load: Provides precise and controlled force application.
• סטעפּלעסס ספּיד רעגולירן: Allows for fine adjustment of test speed.
• Gear Drive: Ensures compact structure and stable, reliable drive.
• קאָנטראָל מאָדעס: Supports both manual (point) and automatic control switching functions.
• קאַמפּאַטאַבילאַטי: Designed to be used with HF and NK series force measurement gauges.
• ווערסאַטאַל אַפּלאַקיישאַן: Suitable for force load, insertion and withdrawal, and destruction tests across various industries.

3.2. קאַמפּאָונאַנץ

The AEL-1000N test stand consists of the main electric single column unit, a test platform, and controls for speed and operation mode. Specific force gauges (HF/NK series) are sold separately and integrate with this stand.

פיגורע 1: Huanyu AEL-1000N Electric Single Column Test Stand. This image shows the main unit of the test stand, highlighting its robust single-column design and base.

4. ספּעסאַפאַקיישאַנז

5. סעטאַפּ

1. אויספּאַקן: נעמט פֿאָרזיכטיק אַרויס אַלע קאָמפּאָנענטן פֿון דער פּאַקאַדזשינג. האַלט די פּאַקאַדזשינג פֿאַר צוקונפֿטיקן טראַנספּאָרט אָדער סטאָרידזש.
2. אָרט: Position the test stand on a sturdy, level workbench or floor capable of supporting its weight and the maximum test load. Ensure adequate clearance around the unit for safe operation and access.
3. מאַכט קשר: באַשטעטיקן דעם באַנדtage selector (if present) is set to your local power supply (220V or 110V). Connect the power cord to the test stand and then to a grounded electrical outlet.
4. Mounting Force Gauge: Securely attach your compatible HF or NK series force measurement gauge to the designated mounting points on the test stand. Refer to the force gauge's manual for specific mounting instructions.
5. אַקסעסערי ינסטאַלירונג: Install any necessary test fixtures or grips according to your specific testing requirements. Ensure they are firmly attached.

6. אַפּערייטינג ינסטרוקטיאָנס

1. מאַכט אויף: Turn on the main power switch of the test stand.
2. Force Gauge Preparation: Power on your force measurement gauge and perform any necessary calibration or zeroing procedures as per its manual.
3. אויסקלייַבן מאָדע: Choose between manual (point) or automatic control mode using the selector switch.
   • Manual (Point) Mode: Allows for precise, incremental movement of the test head.
   • אָטאַמאַטיק מאָדע: Enables continuous movement at a set speed.
4. Set Test Speed: Adjust the stepless speed regulation knob to achieve the desired test speed within the range of 15-240 mm/min or 60-500 mm/min.
5. Mount Specimen: Carefully mount the test specimen into the installed fixtures. Ensure it is securely held and aligned correctly.
6. דורכפירן טעסט:
   • In manual mode, use the directional controls to apply force gradually.
   • In automatic mode, initiate the test, and the stand will move at the set speed.
   Monitor the force gauge readings throughout the test.
7. האַלטן טעסט: Once the test is complete or the desired force/displacement is reached, stop the movement using the controls.
8. Remove Specimen: Carefully remove the tested specimen from the fixtures.
9. מאַכט אַוועק: Turn off the force gauge, then the main power switch of the test stand.

7. וישאַלט

Regular maintenance ensures the longevity and accuracy of your AEL-1000N test stand.

• רייניקונג: Keep the test stand clean and free from dust, debris, and corrosive substances. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• שמירן: Periodically inspect the vertical rods and moving parts for smooth operation. Apply a light, appropriate lubricant if necessary, following manufacturer recommendations for industrial equipment.
• דורכקוק: Regularly check all cables, connections, and mounting hardware for tightness and signs of wear or damage. Replace any worn or damaged parts immediately.
• סטאָרידזש: When not in use for extended periods, store the test stand in a clean, dry environment, protected from extreme temperatures and humidity.

8. טראָובלעשאָאָטינג

For issues not listed above or if solutions do not resolve the problem, please contact Huanyu customer support.

9. וואָראַנטי און שטיצן

Huanyu products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Huanyu website. For technical support, spare parts, or service inquiries, please contact Huanyu customer service through the details provided on our webוועבזייטל אדער אייער קויפן דאקומענטאציע.

קאָנטאַקט אינפֿאָרמאַציע: Please refer to your product packaging or the official Huanyu webזייטל פֿאַר די מערסט אַקטועלע קאָנטאַקט דעטאַלן.