Cornat TECB3362

CORNAT TECB3362 Stainless Steel Shower Hose Instruction Manual

Model: TECB3362 | Length: 150 cm | Material: Stainless Steel | Finish: Chrome

1. הקדמה

This manual provides essential information for the safe and correct installation, operation, and maintenance of your CORNAT TECB3362 Stainless Steel Shower Hose. Please read these instructions carefully before installation and retain them for future reference.

The CORNAT TECB3362 is a high-quality, flexible shower hose designed for connecting a hand shower to a shower mixer or wall outlet. It features a durable stainless steel construction with a chrome finish, ensuring longevity and a sleek appearance in your bathroom.

2. זיכערקייַט אינפֿאָרמאַציע

  • Ensure the water supply is turned off before beginning any installation work to prevent water damage.
  • Use appropriate tools and avoid overtightening connections, which can damage threads or seals.
  • אויב איר זענט נישט זיכער וועגן קיין טייל פון די אינסטאַלאַציע פּראָצעס, קאָנסולטירט אַ קוואַליפֿיצירטן פּלאָמבער.
  • Do not use abrasive cleaners or harsh chemicals on the hose, as this can damage the finish and material.
  • Regularly inspect the hose for signs of wear, kinks, or leaks. Replace immediately if damage is detected.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן און נישט געשעדיגט איידער איר גייט ווייטער מיט דער אינסטאַלאַציע.

  • 1 x CORNAT TECB3362 Stainless Steel Shower Hose (150 cm)
  • 2 x Sealing Washers (typically pre-installed or included)

4. סעטאַפּ און ייַנמאָנטירונג

Follow these steps for proper installation of your shower hose.

  1. צוגרייטונג: Turn off the main water supply to your shower or bathroom. If replacing an old hose, unscrew it from both the shower mixer/wall outlet and the hand shower. Clean any residue from the connection points.
  2. Inspect Washers: Ensure that a sealing washer is correctly seated in each end of the new shower hose. These washers are crucial for preventing leaks.
  3. Connect to Mixer/Outlet: Screw one end of the CORNAT TECB3362 shower hose onto the outlet of your shower mixer or wall connection. Hand-tighten first, then use a wrench to gently tighten an additional quarter to half turn. Avoid overtightening.
  4. Connect to Hand Shower: Screw the other end of the shower hose onto your hand shower. Again, hand-tighten first, then gently tighten with a wrench.
  5. טשעק פֿאַר ליקס: Slowly turn the main water supply back on. Check all connections for any signs of leakage. If leaks occur, gently tighten the connections further. If leaks persist, ensure washers are correctly seated and undamaged.
CORNAT TECB3362 Shower Hose connected to a shower head and mixer

Image 1: The CORNAT TECB3362 Shower Hose, illustrating its flexible design and chrome finish, ready for connection to a shower system.

5. אַפּערייטינג ינסטרוקטיאָנס

The CORNAT TECB3362 shower hose is a passive component of your shower system. Its operation is directly linked to the functionality of your shower mixer and hand shower.

  • Ensure the hose hangs freely and is not kinked or twisted during use, which can restrict water flow or damage the hose.
  • Avoid excessive pulling or stretching of the hose, as this can strain the connections and potentially cause leaks or damage.

6. וישאַלט

Proper maintenance will extend the life of your shower hose and maintain its appearance.

  • רייניקונג: Clean the exterior of the hose regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth.
  • ויסמיידן האַרב קלינערז: Do not use abrasive sponges, scouring pads, or chemical cleaners containing acids, alcohol, or ammonia, as these can damage the chrome finish and stainless steel.
  • דורכקוק: Periodically inspect the hose for any signs of wear, such as cracks, bulges, or corrosion. Check the connections for tightness and ensure the sealing washers are in good condition.
  • קינק פאַרהיטונג: Ensure the hose is not consistently bent or kinked in the same spot, as this can lead to material fatigue and leaks.

7. טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
וואַסער וואָס רינט פֿון פֿאַרבינדונגעןLoose connection, damaged or missing sealing washer.Tighten connections gently. Check and replace sealing washers if necessary. Ensure washers are seated correctly.
רידוסט וואַסער לויפןHose is kinked, debris in the hose or hand shower, or mineral buildup.Straighten the hose. Disconnect and flush the hose. Clean the hand shower's spray nozzles and filter.
Hose appears damaged (cracks, bulges)Material fatigue, excessive bending, or age.The hose needs to be replaced.

8. ספּעסאַפאַקיישאַנז

מאָדעלTECB3362
סאָרטקאָרנאַט
מאַטעריאַלומבאַפלעקט שטאָל
קאָליר / ענדיקןקראָום
נומער לענג150 Centimeters (1.5 meters)
פּונקט וואָג0.29 קילאָגראַמס
מאַקסימום דרוק7 באַרס
אַרויס דיאַמעטער8 מילאַמיטערז

9. וואָראַנטי און שטיצן

פֿאַר וואָראַנטי אינפֿאָרמאַציע און קונה שטיצע, ביטע זען די קויפן דאָקומענטאַציע אָדער קאָנטאַקט דיין הענדלער. האַלטן דיין קויפן באַווייַז פֿאַר קיין וואָראַנטי קליימז.

For further assistance or technical inquiries, please visit the official Cornat webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.

© 2023 Cornat. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.