הקדמה
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
זיכערקייַט אינפֿאָרמאַציע
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
פּעקל אינהאַלט
באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן איידער איר הייבט אָן די אינסטאַלאַציע:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- לאַטש מעקאַניזאַם
- Strike plate (ASA Strike)
- מאַונטינג סקרוז
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
סעטאַפּ און ינסטאַלירונג
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. טיר צוגרייטונג
Ensure your door is prepared with the following standard dimensions:
- קראָס באָר: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- באַקקסעט: 2-3/4 אינטשעס (70 מם)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- באַזײַטיקט דעם לאַטש מיט די צוגעשטעלטע שרויפן.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
אַפּערייטינג ינסטראַקשאַנז
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
באַמערקונג: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
וישאַלט
רעגולערע אויפהאלטונג גאראנטירט די לאנגעוויטי און גלאטן אפעראציע פון אייער שלאס.
- רייניקונג: רייניקט די אויסערלעכע ייבערפלאַכן מיט אַ ווייכן, דamp שטאָף. פֿאַרמײַדט אַברייסיוו רייניגער אָדער סאָלווענטן, וואָס קענען שאַטן די ענדיקונג.
- שמירן: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- דורכקוק: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| די הייבער איז שטייף אדער שווער צו דרייען. | אָנקלייַבונג פון שמוץ אָדער מאַנגל פון לובריקאַציע. | Clean the mechanism and apply graphite lubricant. |
| דער שלאָס־באָלט צוריקציט זיך נישט אינגאַנצן. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| די טיר ראַטלט ווען זי ווערט פֿאַרמאַכט. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | 129002 |
| סעריע | 2500 סעריע |
| לאַק טיפּ | Cylindrical Passage Lock (Non-locking) |
| מאַטעריאַל | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| ענדיקן | אַטלעס קראָום |
| לעווער סטייל | Withnell |
| באַקקסעט | 2-3/4 אינטשעס (70 מם) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| האַנט אָריענטירונג | ניט-כאַנדיד |
| גראַדע | Grade 2 (Standard Duty Commercial) |
| סטרייק פּלאַטע | ASA סטרייק |
| אַרייַנגערעכנט קאַמפּאָונאַנץ | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
וואָראַנטי אינפֿאָרמאַציע
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
קונה שטיצן
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webפּלאַץ: Visit the official Hager webזייטל פֿאַר שטיצע רעסורסן און קאָנטאַקט אינפֿאָרמאַציע.
- קאָנטאַקט: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.