SUPERNIGHT LED Strip Lights SMD 5050 (16.4FT/5M) Instruction Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your SUPERNIGHT 16.4FT (5M) SMD 5050 RGB LED Strip Lights. These flexible LED strips are designed for indoor use, offering vibrant color-changing illumination. Please read this manual thoroughly before use to ensure proper and safe operation.

2. זיכערקייַט אינפֿאָרמאַציע

• Ensure the power supply (not included) matches the specified voltage (12V) and current requirements of the LED strip. Incorrect power can damage the product or pose a fire hazard.
• This product is rated IP65 waterproof, meaning it is protected against low-pressure water jets from any direction. It is intended for דרינענדיק נוצן בלויז and should not be submerged in water or exposed to heavy outdoor weather conditions.
• Do not connect the LED strip directly to AC power. A DC 12V power adapter is required.
• Avoid bending the LED strip sharply, especially at the solder joints, as this can damage the circuit.
• Only cut the LED strip at designated cutting marks (indicated by a scissor icon) to avoid damaging the circuit.
• האַלטן אויס פון דערגרייכן פון קינדער.
• Do not cover the LED strip with materials that could trap heat, as this may lead to overheating.

3. פּעקל אינהאַלט

The SUPERNIGHT LED Strip Lights package includes:

• 1 x SUPERNIGHT 16.4FT (5M) SMD 5050 RGB LED Strip (Model: st-ting-l263)

באַמערקונג: A DC 12V Power Adapter and an RGB remote controller are ניט אַרייַנגערעכנט and must be purchased separately for full functionality.

4. פּראָדוקט פֿעיִקייטן

• SMD 5050 LED Technology: Features 300 high-brightness RGB LEDs on a 16.4ft (5M) flexible PCB board.
• Vibrant Color Changing: Capable of displaying a wide range of colors including red, green, blue, white, purple, yellow, pink, orange, and various colorful combinations.
• IP65 וואָטערפּרוף שאַץ: The PCB is covered with a polyester resin material, protecting the LEDs against multi-directional, low-pressure water jets. Suitable for indoor use.
• Cuttable and Joinable: The strip can be cut at designated scissor marks to adjust length. Additional strips can be connected using appropriate connectors (not included).
• גרינג ינסטאַלירונג: Equipped with double-sided adhesive tape on the back for simple and secure mounting.
• ווערסאַטאַל אַפּלאַקיישאַן: Ideal for accent lighting in bedrooms, under cabinets, TV backlighting, aquariums, and other indoor decorative lighting needs.

5. סעטאַפּ

5.1 Required Components (Not Included)

• דק 12 וו מאַכט אַדאַפּטער
• RGB Remote Controller (for color changing and mode selection)

5.2 ינסטאַללאַטיאָן סטעפּס

1. צוגרייטן די ייבערפלאַך: Clean the surface where the LED strip will be installed. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
2. מעסטן און שניידן (אפציאנאל): If a shorter length is desired, measure the required length and carefully cut the strip only at the designated cutting marks, indicated by a scissor icon. Cutting elsewhere will damage the circuit.



3. שאָלעכץ און שטעקן: Carefully peel off the protective backing from the double-sided adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, ensuring good contact along its entire length.
4. פאַרבינדן צום קאָנטראָללער: Connect the 4-pin connector of the LED strip to your RGB remote controller (not included). Ensure the arrows on both connectors align.
5. פאַרבינדן מאַכט: Connect the RGB remote controller to a compatible DC 12V power adapter (not included). Then, plug the power adapter into a power outlet.

6. אַפּערייטינג ינסטרוקטיאָנס

Once the LED strip is properly installed and connected to a power source and RGB controller (not included), you can operate it using the remote controller.

• מאַכט אויף / אַוועק: Use the power button on your remote controller to turn the lights on or off.
• קאָליר סעלעקציע: Select desired colors (Red, Green, Blue, White, etc.) directly from the remote controller's color palette.
• ברייטנאַס אַדזשאַסטמאַנט: Increase or decrease the brightness using the dedicated brightness control buttons on the remote.
• מאָדע סעלעקציע: Choose from various dynamic modes (e.g., flash, strobe, fade, smooth) to create different lighting effects.

For specific functions and button layouts, refer to the instruction manual provided with your RGB remote controller.

7. וישאַלט

• רייניקונג: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners. Ensure the strip is powered off and unplugged before cleaning.
• דורכקוק: Periodically check the strip for any signs of damage, such as cracks in the resin coating or loose connections.
• קלעפּיק לאָנדזשעוויטי: If the adhesive begins to lose its stickiness, additional mounting clips or stronger adhesive tape may be used to secure the strip.

8. טראָובלעשאָאָטינג

9. ספּעסאַפאַקיישאַנז

10. אפיציעלע פּראָדוקט ווידעאָס

The following video is provided by the seller to demonstrate product features and applications.

11. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SUPERNIGHT webזייטל. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר קיין וואָראַנטי קליימז.