Eibach PSS65-20-014-02-22

אייבאַך פּראָ-סטריט-S PSS65-20-014-02-22 קאָילאָוווער קיט אינסטרוקציע מאַנואַל

Model: PSS65-20-014-02-22

בראַנד: אייבאַך

הקדמה

This manual provides essential information for the Eibach Pro-Street-S PSS65-20-014-02-22 Coilover Kit. It is designed for BMW 3 Touring (E91) models including 316I, 318I, 320I, 323I, 325I, 328I, 330I, 318D, and 320D. Proper installation and maintenance are crucial for optimal performance and safety of your vehicle's suspension system.

זיכערקייַט אינפֿאָרמאַציע

וויכטיק זיכערהייט נאָטיץ:

Installation of suspension components should only be performed by qualified automotive technicians. Incorrect installation can lead to serious injury or vehicle damage. Always follow vehicle manufacturer's service manual procedures and Eibach's specific instructions.

  • טראָגט פּאַסיקע פּערזענלעכע שוץ-עקוויפּמענט (PPE) ווי זיכערהייטס-ברילן און הענטשקעס.
  • זיכער מאַכן אַז די פאָרמיטל איז זיכער געשטיצט אויף דזשעק סטאַנדס אָדער אַ ליפט איידער איר אָנהייבן קיין אַרבעט.
  • Do not modify any components of the coilover kit.
  • After installation, perform a wheel alignment and check all fasteners for proper torque.

וואָס איז אין די קעסטל

The Eibach Pro-Street-S Coilover Kit typically includes the following components:

  • Eibach Pro-Street-S Coilover Struts (Front and Rear)
  • Eibach Springs (Front and Rear)
  • Adjustment Wrenches
  • אינסטאַלאַציע האַרדווער (ווי פארלאנגט)
Eibach Pro-Street-S Coilover Kit components laid out

בילד: איבערview of the Eibach Pro-Street-S Coilover Kit, showing front coilover assemblies, rear shocks, rear springs, and adjustment wrenches.

סעטאַפּ און ינסטאַלירונג

פאַכמאַן ינסטאַלירונג רעקאַמענדיד:

Due to the complexity and safety-critical nature of suspension components, professional installation by a certified mechanic is strongly recommended. This section provides general steps; consult a professional service manual for detailed, vehicle-specific instructions.

אַלגעמיינע ינסטאַללאַטיאָן סטעפּס

  1. צוגרייטונג: Safely lift and support the vehicle. Remove wheels.
  2. Removal of OEM Suspension: Disconnect and remove the original shock absorbers, springs, and associated hardware.
  3. Front Coilover Installation:
    • Assemble the front coilover units if not pre-assembled.
    • Install the front coilover into the vehicle's strut tower and lower control arm.
    • Secure all mounting bolts to the manufacturer's specified torque.
    Close-up of Eibach Pro-Street-S front coilover strut

    בילד: א דעטאַלירטע view of the Eibach Pro-Street-S front coilover strut, highlighting the threaded body and spring perch for height adjustment.

  4. Rear Shock and Spring Installation:
    • Install the rear shock absorbers and separate rear springs.
    • Ensure springs are correctly seated in their perches.
    • Secure all mounting bolts to the manufacturer's specified torque.
    Close-up of Eibach Pro-Street-S rear springs

    Image: A close-up of the Eibach Pro-Street-S rear springs, showing their distinct red color and coil design.

  5. הייך אַדזשאַסטמאַנט:
    • Use the provided adjustment wrenches to set the desired ride height. Refer to Eibach's specific guidelines for recommended height ranges.
    • Ensure both sides of the vehicle are adjusted evenly.
    Eibach Pro-Street-S coilover adjustment mechanism

    בילד: א דעטאַלירטע view of the threaded body and adjustable spring perch on an Eibach Pro-Street-S coilover, used for ride height adjustment.

  6. לעצט טשעקס: Reinstall wheels, lower the vehicle, and re-torque wheel lug nuts.
  7. אַליינמאַנט: A professional wheel alignment is mandatory after any suspension component replacement or adjustment to ensure proper handling and tire wear.

Operating Your Eibach Pro-Street-S Coilovers

The Eibach Pro-Street-S Coilover Kit provides adjustable ride height, allowing you to customize your vehicle's stance and handling characteristics.

פאָר הייך אַדזשאַסטמאַנט

Ride height is adjusted by rotating the spring perch on the threaded shock body. Lowering the vehicle will generally result in a firmer ride and improved cornering stability. Raising the vehicle will increase ground clearance.

  • Always adjust both sides of an axle (front or rear) equally to maintain vehicle balance.
  • After any significant height adjustment, a wheel alignment is required.
  • Do not exceed the minimum or maximum ride height recommendations provided by Eibach to ensure safe operation and prevent damage.

וישאַלט

Regular inspection and maintenance will prolong the life and performance of your Eibach Pro-Street-S Coilover Kit.

  • רעגולער דורכקוק: Periodically inspect all suspension components for signs of wear, damage, or leaks. Check for loose bolts or nuts.
  • רייניקונג: Keep the coilover bodies and springs clean from dirt, salt, and debris, especially in harsh weather conditions. Use mild soap and water.
  • קעראָוזשאַן שוץ: In areas with road salt or high humidity, consider applying a corrosion-inhibiting spray to exposed metal parts, avoiding seals.
  • ווידער טאָרק: After the initial installation and after approximately 500-1000 miles, re-torque all suspension fasteners to the manufacturer's specifications.

טראָובלעשאָאָטינג פּראָסט ישוז

Noise from Suspension

  • סיבה: Loose fasteners, worn bushings, or components rubbing.
  • לייזונג: Inspect all mounting points and fasteners for proper torque. Check for any contact between suspension components and other vehicle parts.

אומגלייכע רייד הייך

  • סיבה: Unequal adjustment, settled springs, or damaged components.
  • לייזונג: Measure ride height at all four corners and adjust as necessary. Ensure adjustments are made on a level surface.

Poor Handling or Premature Tire Wear

  • סיבה: Incorrect wheel alignment, improper tire pressure, or damaged suspension components.
  • לייזונג: Have a professional wheel alignment performed. Check tire pressures. Inspect for any damaged or worn parts.

If you experience persistent issues, consult a qualified automotive technician or contact Eibach customer support.

פּראָדוקט ספּעסאַפאַקיישאַנז

שטריךדעטאַל
סאָרטאיבאך
מאָדעלPSS65-20-014-02-22
קאַמפּאַטאַבאַל פאָרמיטלBMW 3 Touring (E91) 316I, 318I, 320I, 323I, 325I, 328I, 330I, 318D, 320D
פּונקט וואָג50.7 פונט
פּראָדוקט דימענשאַנז29.92 X 5.91 X 17.32 אינטשעס
פאַבריקאַנטהיינריך אייבאַך גאַמב"ה
ASINB00D9PC9RA
מאַנופאַקטורער טייל נומערPSS65-20-014-02-22
ערשטער בנימצא5 נאוועמבער 2014

וואָראַנטי אינפֿאָרמאַציע

Eibach products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Eibach webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער באווייז פון קויפן פאר יעדע גאראנטיע טענות.

קונה שטיצן

For technical assistance, installation questions, or warranty inquiries, please contact Eibach customer support through their official webפּלאַץ.

You can find more information and contact details on the official Eibach webפּלאַץ: www.eibach.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.